화학공학소재연구정보센터
Polymer(Korea), Vol.33, No.2, 104-110, March, 2009
탈미네랄화된 골분을 이용한 스폰지의 제조 및 특성 분석
Preparation and Characterization of Sponge Using Demineralized Bone Particle
E-mail:
초록
탈미네랄화된 골분(DBP)은 생체활성 천연재료로서 골을 형성시키는 유도인자로 널리 사용되고 있다. 본 연구에서는 DBP 스폰지를 펩신의 농도와 가교제의 농도에 따라 그 특성을 분석함으로써 조직공학적 지지체로의 응용가능성을 확인하였다. DBP를 3% 아세트산 용액에 48시간동안 용해시킬 시 0.1, 0.2 및 0.3% 펩신을 첨가하였고, 가교시 1, 5, 10, 50 및 100 mM의 EDC를 적용하였다. 이를 전자주사현미경, 시차주사열량계, 적외선 분광기, 다공도 및 흡수성 실험을 통해 특성분석하였으며 세포의 증식률은 MTT 분석으로 확인하였다. 이러한 결과를 통해 펩신의 농도로는 0.2∼0.3%가, 가교제의 농도는 50∼100 mM에서 물리화학적 특성이 우수한 것으로 판단되었고, 이러한 조건으로 제조된 DBP 스폰지는 조직 공학적 지지체로 유용하게 응용될 수 있을 것이다.
Demineralized boneparticle (DBP) has been widely used as and a powerful promoter of new bone growth. In this study, DBP sponges were chemically crosslinked and characterized for the potential application of tissue engineered scaffolds. The DBP sponges prepared by crosslinking with EDC. 0.1, 0.2 or 0.3% pepsin was applied to DBP dissolved in 3%(v/v) acetic acid aqueous solution for 48 hrs. The prepared sponges were crosslinked by 1, 5, 10, 50 or 100 mM of EDC solution concentration and then were lyophilized. The DBP sponges were characterized by SEM, FT-IR and DSC and analyzed in terms of their porosity and water absorption ability. The cellular viability and proliferation were assayed by MTT assay. Our investigation revealed that 0.2~0.3% of pepsin and 50~100 mM of EDC produced DBP sponges with good physical characteristics. In conclusion, DBP sponge prepared under these conditions is potentially useful for the applications of tissue construction.
  1. Khang G, Kim MS, Min BY, Lee IW, Rhee JM, Lee HB, Tissue Eng. Regen. Med., 3, 376 (2006)
  2. Ko YK, Kim SH, Jeong JS, Park JS, Lim JY, Kim MS, Lee HB, Khang G, Polym.(Korea), 31(6), 505 (2007)
  3. Khang G, Kim MS, Cho SH, Lee IW, Rhee JM, Lee HB, Tissue Eng. Regen. Med., 1, 9 (2004)
  4. Ko YK, Hee SH, Ha HJ, Kim MS, Han CW, Rhee JM, Son YS, Lee HB, Kang G, Tissue Eng. Regen. Med., 4, 67 (2007)
  5. Khang G, Lee SJ, Lee HB, “Polymer-cell interaction”, in Tissue Engineering: Concepts and Application, 2nd Eds., Yoon JJ, Lee I, Editors, Korea Med. Pub. Co., Seoul, p. 297 (2002)
  6. Kim SH, Kim SH, Kim YH, Polym. Sci. Tech., 16, 468 (2005)
  7. Baek MO, Won SJ, Kim SH, Roh HW, Lee NR, Kim MS, Ryu GH, Cho YH, Lee SJ, Khang G, Lee HB, Tissue Eng. Regen. Med., 4, 600 (2007)
  8. Shin HW, Kim SH, Jang JW, Kim MS, Cho SH, Lee HB, Khang G, Polym.(Korea), 28(2), 194 (2004)
  9. Kim SH, Yun SJ, Jang JW, Kim MS, Khang G, Lee HB, Polym.(Korea), 30(1), 14 (2006)
  10. Park IK, Oh SH, Lee JH, Tissue Eng. Regen. Med., 1, 164 (2004)
  11. Jang JW, Lee B, Han CW, Kim MS, Cho SH, Lee HB, Khang G, Polym.(Korea), 28(5), 382 (2004)
  12. Yoon SJ, Park KS, Choi BS, Khang G, Kim MS, Lee JM, Lee HB, Key Eng. Materials, 342-343, 161 (2007)
  13. Choi BS, Kim SH, Yun SJ, Ha HH, Kim MS, Yang YI, Son YS, Khang G, Rhee JM, Lee HB, Tissue Eng. Regen. Med., 3, 295 (2006)
  14. Huang W, Brian C, Isabella W, George R, Jenji I, Beniamin W, Dean Y, Timothy M, Experimental Cell Res., 299, 325 (2004)
  15. Kim EJ, Park CS, Kim MS, Cho SH, Rhee JM, Lee HB, Khang G, Polym.(Korea), 28(3), 218 (2004)
  16. Kim KS, Cho MH, Ahn HH, Song SB, Seo SJ, Kim MS, Lee B, Khang G, Lee HB, Tissue Eng. Regen. Med., 4, 168 (2007)
  17. Kim SK, Hong KD, Ko SH, Kim MS, Khang G, Lee IW, Han CW, Lee HK, Lee HB, Tissue Eng. Regen. Med., 2, 130 (2005)
  18. Sugiura F, Kitoh H, Ishiguro N, Biochem. Biophys. Res. Commun., 316(1), 233 (2004)
  19. Urist MR, Science, 150, 893 (1965)
  20. Mauney JR, Jaquiery C, Volloch V, Hebererb M, Martinb I, Kaplan DL, Biomaterials, 26, 3173 (2005)
  21. Chang Y, Tsail CC, Lian HC, Sung HW, Biomaterials, 23, 2447 (2002)
  22. Park SN, Lee HJ, Lee KH, Suh H, Biomaterials, 24, 1631 (2003)
  23. Charulatha V, Rajaram A, Biomaterials, 24, 759 (2003)
  24. Matsuoka M, Wispriyono B, Igisu H, Biochem. Pharm., 59, 1573 (2000)
  25. Zhang Y, Liu W, Li G, Shi B, Miao Y, Wub X, Food Chem., 103, 906 (2007)
  26. Nalinanon S, Benjakul S, Visessanguan W, Kishimura H, Food Chem., 104, 593 (2007)
  27. Chen Z, Mo X, He C, Wang H, Carbohydrate Polym., 72, 410 (2008)