1 - 2 |
Special issue - APHYS-2003 - Badajoz, Spain, 15-18 October, 2003 -Preface Mendez-Vilas A, Gonzalez-Martin ML |
3 - 8 |
Scanning probe microscopy experiments in microgravity Drobek T, Reiter M, Heckl WM |
9 - 13 |
Some geometrical considerations about the influence of topography on the adhesion force as measured by AFM on curved surfaces Mendez-Vilas A, Gonzalez-Martin ML, Nuevo MJ |
14 - 17 |
Determination of uptake rate of sensitive diffusion sampler for formaldehyde in air Sekine Y, Oikawa D, Butsugan M |
18 - 23 |
Surface characterisation of two strains of Staphylococcus epidermidis with different slime-production by AFM Mendez-Vilas A, Gallardo-Moreno AM, Gonzalez-Martin ML, Calzado-Montero R, Nuevo MJ, Bruque JM, Perez-Giraldo C |
24 - 28 |
Topography induced by sputtering in a magnetic sector instrument: an AFM and SEM study Iacob E, Bersani M, Lui A, Giubertoni D, Barozzi M, Anderle M |
29 - 35 |
Scanning tunneling microscopy of titanium silicide nanoislands Goldfarb I, Grossman S, Cohen-Taguri G, Levinshtein M |
36 - 41 |
Missing dimer defect on beta-SiC(001)-c(2 x 2) surface - numerical analysis of the structure and STM profiles Stankiewicz B, Kaminski W, Jurczyszyn L |
42 - 46 |
Artifacts in AFM images revealed using friction maps Mendez-Vilas A, Gonzalez-Martin ML, Labajos-Broncano L, Nuevo MJ |
47 - 50 |
Force spectroscopy of covalent bond rupture versus protein extraction Afrin R, Okazaki S, Ikai A |
51 - 63 |
Direct surface probing of cell wall-defective mutants of Saccharomyces cerevisiae by atomic force microscopy Mendez-Vilas A, Corbacho I, Gonzalez-Martin ML, Nuevo MJ |
64 - 72 |
Domain size effects on the thermal properties of PS/PMMA blends Silva GG, Rocha PMD, de Oliveira PS, Neves BRA |
73 - 76 |
The dynamics of H-2 and N-2 sorption in carbon nanotubes Otvos Z, Onyestyak G, Valyon J, Kiricsi I, Konya Z, Rees LVC |
77 - 81 |
The effect of promoters on the electronic structure of ruthenium catalysts supported on carbon Guraya M, Sprenger S, Rarog-Pilecka W, Szmigiel D, Kowalczyk Z, Muhler M |
82 - 85 |
Adsorption of Pd atoms on gamma-Al2O3: a density functional study of metal-support interactions Marquez AM, Sanz JF |
86 - 90 |
Ethanol pretreatment effect and particle diameter issues on the adsorption of Candida rugosa lipase onto polypropylene powder Foresti ML, Ferreira ML |
91 - 96 |
An intermittent temperature-programmed desorption method for studying kinetics of desorption from heterogeneous surfaces Gaillard F, Abdat M, Joly JP, Perrard A |
97 - 100 |
The effect of ultrasound on the catalytic activity of alkaline carbons: preparation of N-alkyl imidazoles Duran-Valle CJ, Ferrera-Escudero S, Calvino-Casilda V, Diaz-Teran J, Martin-Aranda RM |
101 - 107 |
Adsorbtion of polyelectrolyte multilayers on plasma-modified porous polyethylene Greene G, Tannenbaum R |
108 - 112 |
Analyses of thin films and surfaces by cold neutron depth profiling Lamaze GP, Chen-Mayer HH, Soni KK |
113 - 116 |
Ion beam processing of magnesium oxide thin films for PDP application Nomura H, Murakami S, Ide-Ektessabi A, Tanaka Y, Tsukuda Y |
117 - 120 |
Erbium-doped thin amorphous carbon films prepared by mixed CVD sputtering Speranza G, Calliari L, Ferrari M, Chiasera A, Ngoc KT, Baranov AM, Sleptsov VV, Nefedov AA, Varfolomeev AE, Fanchenko SS |
121 - 124 |
Dry laser cleaning of mechanically thin films Bloisi F, Barone AC, Vicari L |
125 - 131 |
Microstructure and bactericidal ability of photocatalytic TiO2 thin films prepared by rf helicon magnetron sputtering Lei M, Tanemura S, Kondo Y, Iwata M, Toh S, Kaneko K |
132 - 137 |
Silver nanoparticle formation in thin oxide layer on silicon by silver-negative-ion implantation for Coulomb blockade at room temperature Tsuji H, Arai N, Matsumoto T, Ueno K, Gotoh Y, Adachi K, Kotaki H, Ishikawa J |
138 - 142 |
Spectromicroscopy of ultrathin Pd films on W(110): interplay of morphology and electronic structure Aballe L, Barinov A, Locatelli A, Heun S, Cherifi S, Kiskinova M |
143 - 146 |
Equilibrium and non-equilibrium 1/f noise in AlGaN/GaN TLM structures Vitusevich SA, Danylyuk SV, Petrychuk MV, Antoniuk OA, Klein N, Belyaev AE |
147 - 150 |
Study of GaNxAs1-x semiconducting films grown by laser pulsed deposition on crystalline and amorphous substrates Cardona-Bedoya JA, Cruz-Orea A, Mendoza-Alvarez JG, Gomez-Herrera ML, Farias MH, Diaz JA |
151 - 154 |
Electron inelastic mean free paths and surface excitation parameters for GaAs Kwei CM, Li YC |
155 - 158 |
Ni-Mn-Ga films on Si, GaAs and Ni-Mn-Ga single crystals by pulsed laser deposition Hakola A, Heczko O, Jaakola A, Kajava T, Ullakko K |
159 - 164 |
Ion beam synthesis of 3C-SiC layers in Si and its application in buffer layer for GaN epitaxial growth Ito Y, Yamauchi T, Yamamoto A, Sasase M, Nishio S, Yasuda K, Ishigami Y |
165 - 168 |
Crystallization kinetics of hydrogenated amorphous silicon thick films grown by plasma-enhanced chemical vapour deposition Farjas J, Rath C, Roura P, Cabarrocas PR |
169 - 174 |
SEM and HRTEM study of porous silicon - relationship between fabrication, morphology and optical properties Dian J, Macek A, Niznansky D, Nemec I, Vrkoslav V, Chvojka T, Jelinek I |
175 - 179 |
Heating-sol-gel template process for the growth of TiO2 nanorods with rutile and anatase structure Miao L, Tanemura S, Toh S, Kaneko K, Tanemura M |
180 - 183 |
Structural and morphological properties of Cu(In, Ga)Se-2 thin films on Mo substrate Caballero R, Guillen C |
184 - 188 |
Characterization of copper selenide thin films deposited by chemical bath deposition technique Al-Mamum, Islam ABMO |
189 - 192 |
Homo-epitaxial growth of rutile TiO2 film on step and terrace structured substrate Yamamoto Y, Matsumoto Y, Koinuma H |
193 - 198 |
Effect of UV irradiations on the structural and optical features of porous silicon: application in silicon solar cells Aouida S, Saadoun M, Boujmil MF, Ben Rabha M, Bessais B |
199 - 203 |
Silicon dissolution regimes from chemical vapour etching: from porous structures to silicon grooving Ben Jaballah A, Saadoun M, Hajji A, Ezzaouia H, Bessais B |
204 - 208 |
Quantum Hall effect devices based on AlGaAs/GaAs structures studied by photoreflectance spectroscopy Zamora-Peredo L, Lopez-Lopez M, Rivera Z, Guillen A, Rodriguez-Vaquez AG, Ramirez-Flores G, Lastras-Martinez A, Mendez-Garcia VH |
209 - 212 |
Energy transfer in PbS quantum dots assemblies measured by means of spatially resolved photoluminescence Dantas NO, Monte AFG, Qu FY, Silva RS, Morais PC |
213 - 217 |
Polaronic states in II-VI quantum dot Triki M, Jaziri S |
218 - 222 |
Deposition of phospholipid layers on SiO2 surface modified alkyl-SAM islands Tero R, Takizawa M, Li YJ, Yamazaki M, Urisu T |
223 - 227 |
Molecular dynamics simulation of Cu cluster deposition on Au(001) surfaces Jimenez-Saez JC, Perez-Martin AMC, Jimenez-Rodriguez JJ |
228 - 232 |
First principles simulations of Cu and Au deposition on alpha-Al2O3 (0001) surface Hernandez NC, Sanz JF |
233 - 237 |
In situ GISAXS study of the growth of Pd on MgO(001) Leroy F, Revenant C, Renaud G, Lazzari R |
238 - 241 |
Deposition of 10-undecenoic acid self-assembled layers on H-Si(111) surfaces studied with AFM and FT-IR Li Y, Tero R, Nagasawa T, Nagata T, Urisu T |
242 - 248 |
Numerical simulation of surface deformation and residual stresses fields in laser shock processing experiments Ocana JL, Morales M, Molpeceres C, Torres J |
249 - 253 |
Deformation behaviour induced by point defects near a Cu(001) surface Said-Ettaoussi A, Jimenez-Saez JC, Perez-Martin AMC, Jimenez-Rodriguez JJ |
254 - 261 |
Study of interfacial properties and its effect on magnetization behaviour of Fe/Ni multilayer structure Gupta R, Gupta A, Chaudhari SM, Gupta M, Allenspach P |
262 - 268 |
Structure and interface properties of Mo/B4C/Si multilayers deposited by rf-magnetron sputtering Patelli A, Ravagnan J, Rigato V, Salmaso G, Silvestrini D, Bontempi E, Depero LE |
269 - 272 |
Membrane surface modification and characterization by X-ray photoelectron spectroscopy, atomic force microscopy and contact angle measurements Khayet M |
273 - 277 |
Variability between chitosan membrane surface characteristics as function of its composition and environmental conditions Larena A, Caceres DA |
278 - 281 |
Advanced generation of green conversion coatings for aluminium alloys Bethencourt M, Botana FJ, Cano MJ, Marcos M |
282 - 287 |
Organization of copper-phthalocyanine molecules on mono-molecular organic buffer layers Takajo D, Nemoto T, Ozaki H, Mazaki Y, Isoda S |
288 - 294 |
Microstructure and mechanical properties of ceramic coatings on Ti and Ti-based alloy Surowska B, Bienias J, Walczak M, Sangwal K, Stoch A |
295 - 298 |
Molecular-scale structure fabrication at liquid/solid interfaces Takajo D, Nemoto T, Kurata H, Isoda S |
299 - 303 |
Spontaneous aggregation of lipids in supported membranes with geometrical barriers Yoon TY, Jeong CY, Kim JH, Choi MC, Kim MW, Lee SD |
304 - 308 |
High value carbon materials from PET recycling Parra JB, Ania CO, Arenillas A, Rubiera F, Pis JJ |
309 - 313 |
Porous texture of activated carbons prepared by phosphoric acid activation of woods Diaz-Diez MA, Gomez-Serrano V, Gonzalez CF, Cuerda-Correa EM, Macias-Garcia A |
314 - 319 |
Synthesis and application of hydroxyapatite/polylactide composite biomaterial Ignjatovic N, Uskokovic D |
320 - 323 |
Synthesis and characterization of lanthanum incorporated mesoporous molecular sieves Pesquera C, Gonzalez F, Blanco C, Sanchez L |
324 - 330 |
3D imprint technology using substrate voltage change Taniguchi J, Iida M, Miyazawa T, Miyamoto I, Shinoda K |
331 - 335 |
Polycrystalline SiC growth and characterization Ricciardi C, Boota EA, Giorgis F, Mandraccia P, Meotto UM, Barucca G |
336 - 340 |
Plasma-assisted SiC oxidation for power device fabrication Mandracci P, Ferrero S, Porro S, Ricciardi C, Richieri G, Scaltrito L |
341 - 346 |
Evaluation and quantification of reprocessing modification in single-use devices in interventional cardiology Tessarolo F, Ferrari P, Silvia B, Motta A, Migliaresi C, Zennaro L, Rigo A, Guarrera GM, Nollo G |
347 - 354 |
Preparation of activated carbons from bituminous coal pitches Ganan J, Gonzalez-Garcia CM, Gonzalez JF, Sabio E, Macias-Garcia A, Diaz-Diez MA |
355 - 359 |
Well-aligned Co-filled carbon nanotubes: preparation and magnetic properties Kozhuharova R, Ritschel M, Elefant D, Graff A, Leonhardt A, Monch I, Muhl T, Groudeva-Zotova S, Schneider CM |
360 - 366 |
Optical properties of metal and semiconductor SmS thin films fabricated by rf/dc dual magnetron sputtering Tanemura S, Miao L, Koide S, Mori Y, Jin P, Terai A, Nabatova-Gabain N |
367 - 374 |
Optical and structural properties of amorphous silicon-carbon films for optoelectronic applications Stapinski T, Swatowska B, Kluska S, Walasek E |
375 - 379 |
Comparison between optical techniques and confocal microscopy for defect detection on thin wires Siegmann P, Sanchez-Brea LM, Martinez-Anton JC, Bernabeu E |
380 - 384 |
Optical characterization of surfaces by robust reflectance determination based on air-gap interference Martinez-Anton JC, Quiroga JA, Gonzalez-Moreno R, Bentabeu E |
385 - 389 |
Determination of surface anchoring energies of liquid crystals by optical diffraction Yu CJ, Park JH, Lee SD |
390 - 394 |
Isomeric states of polar molecules on ionic surfaces: electrostatic model and FTIR studies Storozhev PY, Yanko VS, Tsyganenko AA, Palomino GT, Delgado MR, Arean CO |
395 - 399 |
Infrared characterization of strontium titanate thin films Almeida BG, Pietka A, Mendes JA |
400 - 404 |
Photoluminescence studies in highly Te-doped Ga1-xInxAsySb1-y epitaxial layers grown on GaSb by liquid phase epitaxy Diaz-Reyes J, Herrera-Perez JL, Gomez-Herrera ML, Cardona-Bedoya JA, Mendoza-Alvarez JG |
405 - 409 |
Physical characteristics and photoluminescence properties of phosphorous-implanted ZnO thin films Lin CC, Chen SY, Cheng SY |
410 - 414 |
Mesoscopic modelling of the interaction of infrared lasers with composite materials: an application to human dental enamel Verde AV, Ramos MMD, Stoneham M, Ribeiro RM |
415 - 422 |
Effect of radiation and thermal treatment on structural and transport parameters for cellulose regenerated membranes Vaquez MI, Galan P, Casado J, Ariza MJ, Benavente J |
423 - 428 |
Registration of heavy metal ions and pesticides with ATR planar waveguide enzyme sensors Nabok A, Haron S, Ray A |
429 - 432 |
Interfacial microstructure and electrical properties of PT/Al2O3/Si annealed at high temperatures Chen SY, Hsiao CS, Hsu JJ |
433 - 437 |
Characterization of pulsed plasma-ion streams emitted from RPI-type devices applied for material engineering Sadowski MJ, Baranowski J, Skladnik-Sadowska E, Borisko VN, Byrka OV, Tereshin VI, Tsarenko AV |
438 - 443 |
Effect of molecular properties on the performance of polymer light-emitting diodes Ramos MMD, Almeida AM, Correia HMG, Ribeiro RM, Stoneham AM |
444 - 448 |
Morphological change of polycrystalline copper after ion irradiation followed by annealing Hino T, Taguchi T, Yamauchi Y, Hirohata Y, Nishikawa M |
449 - 456 |
Singular points of electrochemical impedance function Garcia-Jareno JJ, Gimenez-Romero D, Vicente F |
457 - 463 |
Ab initio calculations of the LaMnO3 surface properties Evarestov RA, Kotomin EA, Fuks D, Felsteiner J, Maier J |
464 - 468 |
Surface segregation phenomena of solute elements in Al-Pb and Al-Fe dilute binary alloys Tsubakino H, Nogami A, Yamamoto Y, Yamamoto A, Terasawa M, Mitamura T, Kinomura A, Horino Y |
469 - 474 |
Characterisation of YAG : Ce powders thermal treated at different temperatures Del Rosario G, Ohara S, Mancic L, Milosevic O |
475 - 479 |
Physical and rheological properties of petroleum fluids under the radio-frequency electromagnetic field effect and perspectives of technological solutions Kovalyova LA, Khaydar AM |
480 - 484 |
A new drop-shape methodology for surface tension measurement Cabezas MG, Bateni A, Montanero JM, Neumann AW |
485 - 489 |
Characterization of silicon-YBCO buffered multilayers grown by sputtering Chiodoni A, Ballarini V, Botta D, Camerlingo C, Fabbri F, Ferrari S, Gerbaldo R, Ghigo G, Gozzelino L, Laviano F, Minetti B, Pirri CF, Tallarida G, Tresso E, Mezzetti E |
490 - 494 |
Manipulation and conductivity measurements of gold nanowires Wilms M, Conrad J, Vasilev K, Kreiter M, Wegner G |
495 - 500 |
Characterization of a new sensing device based on hydrocarbon groups (CHx) coated porous silicon Cheraga H, Belhousse S, Gabouze N |
501 - 505 |
Experimental assessment of the influence of irradiation parameters on surface deformation and residual stresses in laser shock processed metallic alloys Ocana JL, Molpeceres C, Porro JA, Gomez G, Morales M |
506 - 512 |
Metal-ceramic interfaces: joining silicon nitride-stainless steel Polanco R, De Pablos A, Miranzo P, Osendi MI |
513 - 517 |
Multifractal analysis of growing surfaces Chaudhari A, Yan CCS, Lee SL |
518 - 522 |
Release of a chitosan-hydroxyapatite composite loaded with ibuprofen and acetyl-salicylic acid submitted to different sterilization treatments Larena A, Caceres DA, Vicario C, Fuentes A |
523 - 529 |
Interfacial interactions of structural adhesive components with cement pastes - Studies by inverse gas chromatography (IGC) Neves IB, Chabut M, Perruchot C, Chehimi MM, Benzarti K |
530 - 537 |
Use of different surface analysis techniques for the study of the photo-degradation of a polymeric matrix composite Larena A, de Ochoa SJ |