1 - 8 |
Indentation property and corrosion resistance of electroless nickel-phosphorus coatings deposited on austenitic high-Mn TWIP steel Hamada AS, Sahu P, Porter DA |
9 - 17 |
Modification of carbon fiber surfaces via grafting with Meldrum's acid Fang CQ, Wu JX, Wang JL, Zhang T |
18 - 23 |
Size-dependent of chromium (VI) adsorption on nano alpha-Fe2O3 surface Xiao Q, Sun Y, Zhang J, Li QJ |
24 - 29 |
Role of the oxide layer on Sn electrode in electrochemical reduction of CO2 to formate Zhang R, Lv WX, Lei LX |
30 - 38 |
Defluoridation potential of jute fibers grafted with fatty acyl chain Manna S, Saha P, Roy D, Sen R, Adhikari B |
39 - 47 |
Fabrication of polyaniline hydrogel: Synthesis, characterization and adsorption of methylene blue Yan B, Chen ZH, Cai L, Chen ZM, Fu JW, Xu Q |
48 - 53 |
ZnO:Ga nanowires with low turn-on field for field-emission lighting Yang SH, Tsai MW, Lin JW, Chiang PJ |
54 - 62 |
Fabrication of a novel aluminum surface covered by numerous high-aspect-ratio anodic alumina nanofibers Nakajima D, Kikuchi T, Natsui S, Sakaguchi N, Suzuki RO |
63 - 72 |
The behavior of pre-corrosion effect on the performance of imidazoline-based inhibitor in 3 wt.% NaCl solution saturated with CO2 Zhang HH, Pang XL, Zhou M, Liu C, Wei L, Gao KW |
73 - 80 |
Er-doped ZnO nanofibers for high sensibility detection of ethanol Sun YJ, Zhao ZT, Li PW, Li G, Chen Y, Zhang WD, Hu J |
81 - 90 |
Fabrication of low adhesive superhydrophobic surfaces using nano Cu/Al2O3 Ni-Cr composited electro-brush plating Chen TC, Ge SR, Liu HT, Sun QH, Zhu W, Yan W, Qi JW |
91 - 101 |
Comparative study of Hg(II) adsorption by thiol- and hydroxyl-containing bifunctional montmorillonite and vermiculite Tran L, Wu PX, Zhu YJ, Liu S, Zhu NW |
102 - 109 |
Mechanical strain induced wetting transitions between anisotropic and isotropic on polydimethylsiloxane (PDMS) films patterned by optical discs Goel P, Kumar S, Kapoor R, Singh JP |
110 - 114 |
A first-principles study of light non-metallic atom substituted blue phosphorene Sun ML, Tang WC, Ren QQ, Wang SK, Yu J, Du YH |
115 - 123 |
Boosted surface acidity in TiO2 and Al2O3-TiO2 nanotubes as catalytic supports Camposeco R, Castillo S, Mejia-Centeno I, Navarrete J, Nava N |
124 - 127 |
Effect of preparation method on CuZnAl catalysts for ethanol synthesis from syngas Liu YJ, Zuo ZJ, Li C, Deng X, Huang W |
128 - 134 |
Interaction between phosphate and acid-activated neutralized red mud during adsorption process Ye J, Cong XN, Zhang PY, Hoffmann E, Zeng GM, Liu Y, Fang W, Wu Y, Zhang HB |
135 - 141 |
Influences of urea and sodium nitrite on surface coating of plasma electrolytic oxidation Yeh SC, Tsai DS, Guan SY, Chou CC |
142 - 149 |
Surface excitation parameter for rough surfaces Da B, Salma K, Ji H, Mao SF, Zhang GH, Wang XP, Ding ZJ |
150 - 156 |
Study on the modified montmorillonite for adsorbing formaldehyde Lin F, Zhu GQ, Shen YN, Zhang ZY, Dong B |
157 - 166 |
A facile solution-immersion process for the fabrication of superhydrophobic gibbsite films with a binary micro-nano structure: Effective factors optimization via Taguchi method Poorebrahimi S, Norouzbeigi R |
167 - 172 |
Effect of temperature on pseudocapacitance performance of carbon fiber@NiCo2O4@Ni(OH)(2) core-shell nanowire array composite electrodes Zhang J, Gao H, Yang Q, Zhang XT, Zhang MY, Xu LL |
173 - 180 |
Photocatalytic reduction of CO2 into methanol and ethanol over conducting polymers modified Bi2WO6 microspheres under visible light Dai WL, Xu H, Yu JJ, Hu X, Luo XB, Tu XM, Yang LX |
181 - 190 |
Promotional effect of tungsten-doped CeO2/TiO2 for selective catalytic reduction of NOx with ammonia Kwon DW, Hong SC |
191 - 202 |
The polymeric nanofilm of triazinedithiolsilane fabricated by self-assembled technique on copper surface. Part 2: Characterization of composition and morphology Wang YB, Liu Z, Huang YD, Qi YT |
203 - 212 |
Solar selective absorbing coatings based on AlSiN/AlSiON/AlSiOy layers Rebouta L, Sousa A, Andritschky M, Cerqueira F, Tavares CJ, Santilli P, Pischow K |
213 - 220 |
Surface orientation dependence of the activation energy of S diffusion in bcc Fe Barnard PE, Terblans JJ, Swart HC |
221 - 225 |
Mechanical characteristics of graphene nanoribbons encapsulated in single-walled carbon nanotubes using molecular dynamics simulations Fang TH, Chang WJ, Feng YL |
226 - 231 |
Synthesis of Ag3PO4-polyvinyl alcohol hybrid microcrystal with enhanced visible light photocatalytic activity Sulaeman U, Wu XY, Liu B, Yin S, Sato T |
232 - 239 |
Preparation of a hybrid core-shell structured BaTiO3@PEDOT nanocomposite and its applications in dielectric and electrode materials Wang T, Zhang XH, Chen D, Ma YH, Wang L, Zhao CW, Yang WT |
240 - 248 |
In-situ observation of hydrothermal growth of ZnO nanowires on patterned Zn substrate and their photocatalytic performance Liu XM, Huang WY, Cheng H, Huang BB, Bai DW, Fu FM, Wu HD, Li LJ |
249 - 258 |
Ag-induced root 3 reconstruction on Si(111)/Ge-(5 x 5) and the surfactant behavior of Ag in further growth of Ge Mahato JC, Das D, Bisi B, Pal A, Dev BN |
259 - 265 |
Controlled synthesis of hierarchical birnessite-type MnO2 nanoflowers for supercapacitor applications Zhao SQ, Liu TM, Hou DW, Zeng W, Miao B, Hussain S, Peng XH, Javed MS |
266 - 272 |
Magnetic resonance image segmentation using multifractal techniques Yu YE, Wang F, Liu LL |
273 - 281 |
A general strategy toward the rational synthesis of metal tungstate nanostructures using plasma electrolytic oxidation method Jiang YN, Liu BD, Zhai ZF, Liu XY, Yang B, Liu LS, Jiang X |
282 - 288 |
CO oxidation mechanism on a MgO(100) supported PtxAu3-x clusters Zhang W, Cui R, Wu H, Zhu JQ, Cheng DJ |
289 - 293 |
Effect of copper content on the properties of electroless Ni-Cu-P coatings prepared on magnesium alloys Liu JJ, Wang XD, Tian ZY, Yuan M, Ma XJ |
294 - 300 |
3D Pt/MoO3 nanocatalysts fabricated for effective electrocatalytic oxidation of alcohol Zhang HL, Yao G, Wang LP, Su YJ, Yang WQ, Lin Y |
301 - 307 |
Selective and sensitive furazolidone biosensor based on DNA-modified TiO2-reduced graphene oxide Ensafi AA, Sohrabi M, Jafari-Asl M, Rezaei B |
308 - 316 |
Visible light driven photocatalytic hydrogen evolution over CdS incorporated mesoporous silica derived from MCM-48 Zhao D, Wu Q, Yang CF, Koodali RT |
317 - 324 |
Anodized aluminum-silicon alloy counter electrode substrates for next generation solar cell applications Alpay N, Benehkohal NP, Cote MP, Demopoulos GP, Brochu M |
325 - 332 |
Charge properties and bacterial contact-killing of hyperbranched polyurea-polyethyleneimine coatings with various degrees of alkylation Roest S, van der Mei HC, Loontjens TJA, Busscher HJ |
333 - 340 |
Effect of FeWO4 doping on the photocatalytic activity of ZnO under visible light irradiation Buvaneswari K, Karthiga R, Kavitha B, Rajarajan M, Suganthi A |
341 - 347 |
Corrosion mitigation of J55 steel in 3.5% NaCl solution by a macrocyclic inhibitor Singh A, Lin YH, Obot IB, Ebenso EE, Ansari KR, Quraishi MA |
348 - 354 |
Effects of AFM tip-based direct and vibration assisted scratching methods on nanogrooves fabrication on a polymer resist Geng YQ, Yan YD, Zhuang Y, Hu ZJ |
355 - 363 |
Highly effective removal of Cu(II) by triethylenetetramine-magnetic reduced graphene oxide composite Chen JH, Xing HT, Sun X, Su ZB, Huang YH, Weng W, Hu SR, Guo HX, Wu WB, He YS |
364 - 369 |
Fabrication and characterization of highly ordered Au nanocone array-patterned glass with enhanced SERS and hydrophobicity Liu DM, Wang QK, Hukey J |
370 - 377 |
Towards a better understanding of the geometrical and orientational aspects of the electronic structure of halogens (F-I) adsorption on graphene Widjaja H, Jiang ZT, Altarawneh M, Yin CY, Goh BM, Mondinos N, Dlugogorski BZ |
378 - 382 |
Effect of sulfur passivation of InSb (001) substrates on molecular-beam homoepitaxy Solov'ev VA, Sedova IV, Lvova TV, Lebedev MV, Dement'ev PA, Sitnikova AA, Semenov AN, Ivanov SV |
383 - 390 |
Structure and wear behavior of NiCr-Cr3C2 coatings sprayed by supersonic plasma spraying and high velocity oxy-fuel technologies Lin L, Li GL, Wang HD, Kang JJ, Xu ZL, Wang HJ |
391 - 398 |
Self-doped TiO2-x nanowires with enhanced photocatalytic activity: Facile synthesis and effects of the Ti3+ Wang JP, Yang P, Huang BB |
399 - 407 |
Effect of titanium nitride coating on physical properties of three-dimensional graphene Dabir F, Sarraf-Mamoory R, Loeblein M, Tsang SH, Teo EHT |
408 - 415 |
Reactive-ion etching of nylon fabric meshes using oxygen plasma for creating surface nanostructures Salapare HS, Darmanin T, Guittard F |
416 - 421 |
Tension behavior of interfaces between ZrCu metallic glass and Si or Zr Hsieh CH, Chang CH, Chuang WS, Wang X, Huang JC |
422 - 428 |
Development of nanotopography during SIMS characterization of thin films of Ge1-xSnx alloy Secchi M, Demenev E, Colaux JL, Giubertoni D, Dell'Anna R, Iacob E, Gwilliam M, Jeynes C, Bersani M |
429 - 437 |
Temperature dependence of W metallic coatings synthesized by double glow plasma surface alloying technology on CVD diamond films Gao J, Hei HJ, Shen YY, Liu XP, Tang B, He ZY, Yu SW |
438 - 446 |
Effect of NaOH molar concentration on optical and ferroelectric properties of ZnO nanostructures Chand P, Gaur A, Kumar A, Gaur UK |
447 - 453 |
Synthesis of g-C3N4/CeO2 nanocomposites with improved catalytic activity on the thermal decomposition of ammonium perchlorate Tan LH, Xu JH, Zhang XJ, Hang ZS, Jia YQ, Wang SB |
454 - 459 |
Full ALD Ta2O5-based stacks for resistive random access memory grown with in vacuo XPS monitoring Egorov KV, Lebedinskii YY, Markeev AM, Orlov OM |
460 - 466 |
Wetting and interface phenomena in the molten Sn/CuFeNiCoCr high-entropy alloy system Ma GF, Li ZK, Ye H, He CL, Zhang HF, Hu ZQ |
467 - 474 |
Enhanced biofouling resistance of polyethersulfone membrane surface modified with capsaicin derivative and itaconic acid Wang J, Gao XL, Wang Q, Sun HJ, Wang XJ, Gao CJ |
475 - 485 |
Study of the effects produced by shot peening on the surface of quenched and tempered steels: roughness, residual stresses and work hardening Llaneza V, Belzunce FJ |
486 - 491 |
Investigation the interaction between the pulsed ultraviolet laser beams and PEDOT:PSS/graphene composite films Tseng SF, Hsiao WT, Chung CK, Chang TL |
492 - 498 |
Plasma-grafting polymerization on carbon fibers and its effect on their composite properties Zhang HX, Li W |
499 - 511 |
The effect of O-2 content on the corrosion behaviour of X65 and 5Cr in water-containing supercritical CO2 environments Hua Y, Barker R, Neville A |
512 - 520 |
Non-platinum nanocatalyst on porous nitrogen-doped carbon fabricated by cathodic vacuum arc plasma technique Sirirak R, Sarakonsri T, Medhesuwakul M |
521 - 531 |
Photocatalytic performance of highly amorphous titania-silica aerogels with mesopores: The adverse effect of the in situ adsorption of some organic substrates during photodegradation Lazar I, Kalmar J, Peter A, Szilagyi A, Gyori E, Ditroi T, Fabian I |
532 - 538 |
Influence of chemical polymer composition on integrated waveguide formation induced by excimer laser surface irradiation Hessler S, Rosenberger M, Belle S, Schmauss B, Hellmann R |
539 - 545 |
Anti-icing performance in glaze ice of nanostructured film prepared by RF magnetron sputtering Liao RJ, Zuo ZP, Guo C, Zhuang AY, Zhao XT, Yuan Y |
546 - 552 |
Temperature-dependent differences in wettability and photocatalysis of TiO2 nanotube arrays thin films Zhang M, Yao G, Cheng YL, Xu YY, Yang L, Lv JG, Shi SW, Jiang XS, He G, Wang PH, Song XP, Sun ZQ |
553 - 560 |
Enhanced supercapacitor performances using C-doped porous TiO2 electrodes Chen JR, Qiu FX, Zhang Y, Liang JZ, Zhu HJ, Cao SS |
561 - 573 |
Effect of microstructure and chemical composition on localized corrosion resistance of a AISI 304L stainless steel after nanopulsed-laser surface melting Pacquentin W, Caron N, Oltra R |
574 - 580 |
Photocurrent enhancement of the CdS/TiO2/ITO photoelectrodes achieved by controlling the deposition amount of Ag2S nanocrystals Chen C, Zhai Y, Li FM, Ling LY |
581 - 586 |
Investigation of micro-arc oxidation coating growth patterns of aluminum alloy by two-step oxidation method Li WP, Qian ZY, Liu XH, Zhu LQ, Liu HC |
587 - 592 |
High-stability Ti4+ precursor for the TiO2 compact layer of dye-sensitized solar cells Yi QH, Cong S, Wang H, Wang Y, Dai X, Zhao J, Sun YH, Lou YH, Zou GF |
593 - 598 |
Antireflective coatings with adjustable transmittance and high laser-induced damage threshold prepared by deposition of magnesium fluoride nanoparticles Chi FT, Wei GL, Zhang Q, Sun XY, Zhang LJ, Lu XR, Wang LL, Yi FC, Gao XL |
599 - 609 |
Bioactive (Si, O, N)/(Ti, O, N)/Ti composite coating on NiTi shape memory alloy for enhanced wear and corrosion performance Sun T, Xue N, Liu C, Wang C, He J |
610 - 614 |
Synthesis and membrane performance characterization of self-emulsified waterborne nitrocellulose dispersion modified with castor oil Su XX, Zhao QX, Zhang D, Dong W |
615 - 625 |
Band gap-engineered ZnO and Ag/ZnO by ball-milling method and their photocatalytic and Fenton-like photocatalytic activities Choi YI, Jung HJ, Shin WG, Sohn Y |
626 - 630 |
Strain-induced band structure and mobility modulation in graphitic blue phosphorus Liu LZ, Wu XL, Liu XX, Chu PK |
631 - 638 |
Ion beam analysis of Cu(In,Ga)Se-2 thin film solar cells Karydas AG, Streeck C, Radovic IB, Kaufmann C, Rissom T, Beckhoff B, Jaksic M, Barradas NP |
639 - 644 |
Construction of mechanically durable superhydrophobic surfaces by thermal spray deposition and further surface modification Chen XY, Gong YF, Suo XK, Huang J, Liu Y, Li H |
645 - 650 |
Mixed SAMs of backbone-functionalized tribenzotriquinacenes and alkanethiols: Synthesis, preparation and STM-investigations Henne S, Bredenkotter B, Volkmer D |
651 - 658 |
MD simulation of growth of Pd on Cu (111) and Cu on Pd (111) substrates Fu T, Peng XH, Feng C, Zhao YB, Wang ZC |
659 - 667 |
Tailoring interlayer structure of molecular layer-by-layer assembled polyamide membranes for high separation performance Gu JE, Lee JS, Park SH, Kim IT, Chan EP, Kwon YN, Lee JH |
668 - 673 |
First-principles study of the alkali earth metal atoms adsorption on graphene Sun ML, Tang WC, Ren QQ, Wang SK, JinYu, Du YH, Zhang YJ |
674 - 678 |
Fabrication of graphene and ZnO nanocones hybrid structure for transparent field emission device Zulkifli Z, Shinde SM, Suguira T, Kalita G, Tanemura M |
679 - 686 |
D-Amino acid oxidase bio-functionalized platforms: Toward an enhanced enzymatic bio-activity Herrera E, Taubas JV, Giacomelli CE |
687 - 694 |
Electrodeposition efficiency of Ni in the fabrication of highly ordered nanowire arrays: The roles of Cu pre-plating and barrier layer temperature Ahmadzadeh M, Almasi-Kashi M, Ramazani A, Montazer AH |
695 - 700 |
Tuning of the microstructure, mechanical and tribological properties of a-C:H films by bias voltage of high frequency unipolar pulse Wang J, Cao ZY, Pan FP, Wang FG, Liang AM, Zhang JY |
701 - 706 |
ITO induced tunability of surface plasmon resonance of silver thin film Hong RJ, Wang XH, Ji JL, Tao CX, Zhang DH, Zhang DW |
707 - 718 |
Fabrication of efficient visible light activated Cu-P25-graphene ternary composite for photocatalytic degradation of methyl blue Jin Z, Duan WB, Liu B, Chen XD, Yang FH, Guo JP |
719 - 725 |
Examining the electrical and chemical properties of reduced graphene oxide with varying annealing temperatures in argon atmosphere Chambers BA, Notarianni M, Liu JZ, Motta N, Andersson GG |
726 - 731 |
Single-step, size-controlled synthesis of colloidal silver nanoparticles stabilized by octadecylamine Neelgund GM, Karthikeyan B, Shivashankar SA, Oki A |
732 - 736 |
Distance-dependent lateral photovoltaic effect in a-Si:H(p)/a-Si:H(i)/c-Si(n) structure Qiao S, Chen JH, Liu JH, Fu N, Yan GY, Wang SF |
737 - 741 |
The deposition of globular polypyrrole and polypyrrole nanotubes on cotton textile Bober P, Stejskal J, Sedenkova I, Trchova M, Martinkova L, Marek J |
742 - 746 |
Reconstructions and stabilities of PbTe(111) crystal surface from experiments and density-functional theory Wu HF, Si JX, Yan YH, Liao Q, Lu YH |
747 - 752 |
Liquid nitrogen-assisted synthesis of fluorescent carbon dots from Blueberry and their performance in Fe3+ detection Aslandas AM, Balci N, Arik M, Sakiroglu H, Onganer Y, Meral K |
753 - 761 |
High surface area microporous activated carbons prepared from Fox nut (Euryale ferox) shell by zinc chloride activation Kumar A, Jena HM |
762 - 768 |
Ultrasound assisted synthesis of ZnO/reduced graphene oxide composites with enhanced photocatalytic activity and anti-photocorrosion Peng YG, Ji JL, Chen DJ |
769 - 775 |
Study of the anisotropic segregation behavior of Sn on the surfaces of zirconium alloys by XPS Xie SJ, Song WX, Zhou BX, Xu J, Zhao SJ |
776 - 779 |
Inductively coupled plasma etching of GaAs in Cl-2/Ar, Cl-2/Ar/O-2 chemistries with photoresist mask Liu K, Ren XM, Huang YQ, Cai SW, Duan XF, Wang Q, Kang C, Li JS, Chen QT, Fei JR |
780 - 790 |
Coupling Fe-0 nano particles with living and dead Azolla filicoloides to improve removal of methylene blue from aqueous solution Rakhshaee R |
791 - 794 |
Surface plasmon enhanced organic light emitting diodes by gold nanoparticles with different sizes Gao CY, Chen YC, Chen KL, Huang CJ |
795 - 803 |
Effects of surface-oxidation modification and heat treatment on silicon carbide 3D/AlCu5MgTi composites during vacuum-pressure infiltration Xue LY, Wang FC, Ma Z, Wang YW |
804 - 811 |
Structural, optical, and magnetic properties of Ni doped ZnO nanoparticles: Correlation of magnetic moment with defect density Pal B, Sarkar D, Giri PK |
812 - 816 |
Solvothermal synthesis and enhanced CO2 adsorption ability of mesoporous graphene oxide-ZnO nanocomposite Li WD, Jiang X, Yang HY, Liu Q |
817 - 826 |
Effects of the PPy layer thickness on Co-PPy composite films Haciismailoglu M |
827 - 836 |
Microstructure evolution and oxidation resistance of silicon-aluminizing coating on gamma-TiAl alloy Wang JQ, Kong LY, Wu J, Li TF, Xiong TY |
837 - 843 |
An in situ study of zirconium-based conversion treatment on zinc surfaces Taheri P, Laha P, Terryn H, Mol JMC |
844 - 851 |
Bovine serum albumin bioconjugated graphene oxide: Red blood cell adhesion and hemolysis studied by QCM-D Cai B, Hu KB, Li CM, Jin J, Hu YX |
852 - 861 |
Glutaraldehyde assisted synthesis of collagen derivative modified Fe3+/TiO2 nanocomposite and their enhanced photocatalytic activity Li CY, Xue F, Ding EY, He XL |
862 - 867 |
Pseudomorphic growth mode of Pb on the Al13Fe4(010) approximant surface Ledieu J, de Weerd MC, Hahne M, Gille P, Fournee V |
868 - 874 |
Effects of photoanode structure on the performance of flexible dye-sensitized solar cell haying a Ti substrate Wu TT, Ting JM |
875 - 880 |
One-pot template-free synthesis of uniform-sized fullerene-like magnetite hollow spheres Zhu Q, Zhang Y, Liu Z, Zhou XR, Zhang XM, Zeng LT |
881 - 887 |
Unique electron transport in ultrathin black phosphorene: Ab-initio study Srivastava A, Khan MS, Gupta SK, Pandey R |
888 - 897 |
Experimental identification for physical mechanism of fiber-form nanostructure growth on metal surfaces with helium plasma irradiation Takamura S, Uesugi Y |
898 - 904 |
Tuning the resistive switching memory in a metal-ferroelectric-semiconductor capacitor by field effect structure Wang SY, Guo F, Wang X, Liu WF, Gao J |
905 - 910 |
Adsorption mechanism of poly(vinyl alcohol) at the mixed oxide CuxOy-SiO2/aqueous solution interface Wisniewska M, Bogatyrov V, Szewczuk-Karpisz K, Ostolska I, Terpilowski K |
911 - 920 |
Photoelectrochemical characterization of squaraine-sensitized nickel oxide cathodes deposited via screen-printing for p-type dye-sensitized solar cells Naponiello G, Venditti I, Zardetto V, Saccone D, Di Carlo A, Fratoddi I, Barolo C, Dini D |
921 - 926 |
Nanoscale characterization of CH3-terminated Self-Assembled Monolayer on copper by advanced scanning probe microscopy techniques Berthold T, Benstetter G, Frammelsberger W, Rodriguez R, Nafria M |
927 - 934 |
Al2O3-ZrO2 nanostructured coatings using DC plasma electrolytic oxidation to improve tribological properties of Al substrates Barati N, Meletis EI, Fard FG, Yerokhin A, Rastegari S, Faghihi-Sani MA |
935 - 940 |
Optical property of La1-xSrxTiO3+delta coatings deposited by plasma spraying technique Zhu JP, Gao LH, Ma Z, Liu YB, Wang FC |
941 - 950 |
Cyclized polyacrynitrile modified Ag3PO4 photocatalysts with enhanced photocatalytic activity under visible-light irradiation Li XY, Zheng RJ, Luo QZ, Wang DS, An J, Yin R, Liu YY, Wu D, Han XM |
951 - 957 |
Superamphiphobic cotton fabrics with enhanced stability Xu B, Ding YY, Qu SB, Cai ZS |
958 - 966 |
Effect of Si-incorporation on the structure, mechanical, tribological and corrosion properties of WSiN coatings Zhao HJ, Ye FX |
967 - 971 |
Periodic DFT investigation of methanol coverage on surfaces of MgCl2-supported Ziegler-Natta catalysts Xie KF, Huang AP, Zhu BC, Xu JC, Liu P |
972 - 977 |
CMC-coated Fe3O4 nanoparticles as new MRI probes for hepatocellular carcinoma Sitthichai S, Pilapong C, Thongtem T, Thongtem S |
978 - 985 |
Study on the growth mechanism and optical properties of sputtered lead selenide thin films Sun XG, Gao KW, Pang XL, Yang HS, Volinsky AA |
986 - 997 |
Adsorption of Cr(VI) and Cu(II) by AlPO4 modified biosynthetic Schwertmannite Gan M, Sun SJ, Zheng ZH, Tang HJ, Sheng JR, Zhu JY, Liu XX |
998 - 1004 |
Structural and photoluminescence properties of Al-doped zinc oxide nanoparticles synthesized in polyol Louhichi M, Romdhane S, Fkiri A, Smiri LS, Bouchriha H |
1005 - 1011 |
Zn(II)-concentration dependent Raman spectra in the dithizone complex on gold nanoparticle surfaces in environmental water samples Ly NH, Joo SW |
1012 - 1024 |
Superhydrophobic aluminum alloy surfaces prepared by chemical etching process and their corrosion resistance properties Huang Y, Sarkar DK, Chen XG |
1025 - 1031 |
A DFT study of electronic and magnetic properties of titanium decorating point-defective graphene Zhou QX, Fu ZB, Wang CY, Tang YJ, Zhang H, Yuan L, Yang X |
1032 - 1038 |
Microwave absorbing property of a hybrid absorbent with carbonyl irons coating on the graphite Xu YG, Yan ZQ, Zhang DY |
1039 - 1051 |
Role of spray processes on microstructural evolution, and physical and mechanical properties of multi-walled carbon nanotube reinforced cu composite coatings Kang K, Park H, Kim J, Lee C |
1052 - 1057 |
Ge-on-insulator wafer with ultralow defect density fabricated by direct condensation of SiGe-on-insulator structure Ye L, Zhang M, Xue ZY, Yang JH, Wang X, Di ZF |
1058 - 1063 |
Anodic stripping voltammetry of silver(I) using unmodified GaN film and nanostructure electrodes Liu QY, Liu BD, Yuan F, Zhuang H, Wang C, Shi D, Xu YK, Jiang X |
1064 - 1069 |
Luminescence and electron degradation properties of Bi doped CaO phosphor Yousif A, Kroon RE, Coetsee E, Ntwaeaborwa OM, Ahmed HAAS, Swart HC |
1070 - 1076 |
Near room temperature ferromagnetism of copper phthalocyanine thin films Wang XY, Zheng JB, Chen L, Qiao K, Xu JW, Cao CD |
1077 - 1081 |
Luminescent and magnetic properties of carbon-based FeYO3/Y2O3:Eu3+ nanocomposites Wu AB, Zhang ZP |
1082 - 1085 |
Exploring the low-friction mechanism of CNx films in inert atmospheres by first-principles calculations Cui LC, Lu ZB, Wang LP |
1086 - 1095 |
Modified nano-magnetite coated carbon fibers magnetic and microwave properties Osouli-Bostanabad K, Hosseinzade E, Kianvash A, Entezami A |
1096 - 1104 |
Study of structural and optical properties of ZnS zigzag nanostructured thin films Rahchamani SZ, Dizaji HR, Ehsani MH |
1105 - 1116 |
Effects of hydrophilic solvent and oxidation resistance post surface treatment on molecular structure and forward osmosis performance of polyamide thin-film composite (TFC) membranes Jia QB, Xu YY, Shen JQ, Yang HJ, Zhou L |
1117 - 1126 |
Surface medication of Ti-15Mo alloy by thermal oxidation: Evaluation of surface characteristics and corrosion resistance in Ringer's solution Somsanith N, Narayanan TSNS, Kim YK, Park IS, Bae TS, Lee MH |
1127 - 1134 |
Synthesis and property of spinel porous ZnMn2O4 microspheres Guo N, Wei XQ, Deng XL, Xu XJ |
1135 - 1149 |
Effects of texture diameter and depth on the tribological performance of DLC coating under lubricated sliding condition Arslan A, Masjuki HH, Varman M, Kalam MA, Quazi MM, Al Mahmud KAH, Gulzar M, Habibullah M |
1150 - 1154 |
Suppression of uphill diffusion caused by phosphorus deactivation using carbon implantation Chang RD, Ling YT, Su WT |
1155 - 1167 |
Fast adsorption of p-nitrophenol from aqueous solution using beta-cyclodextrin grafted silica gel Shen HM, Zhu GY, Yu WB, Wu HK, Ji HB, Shi HX, She YB, Zheng YF |
1168 - 1179 |
Preparation of hierarchical structured nano-sized/porous poly(lactic acid) composite fibrous membranes for air filtration Wang Z, Pan ZJ |
1180 - 1188 |
Effects of B2O3 content and sintering temperature on crystallization and microstructure of CBS glass-ceramic coatings Li PY, Wang SB, Liu JG, Feng MJ, Yang XW |
1189 - 1199 |
Investigation of contact-induced charging kinetics on variably modified glass surfaces Agnello G, Hamilton J, Manley R, Streltsova E, LaCourse W, Cormack A |
1200 - 1206 |
Tunable electronic structures in the two-dimension SnX2 (X = S and Se) nanosheets by stacking effects Zhang H, Xia CX, Zhao X, Wang TX, Li JB |
1207 - 1213 |
Interfacial polymerization on hydrophobic PVDF UF membranes surface: Membrane wetting through pressurization Lee JS, Lee HH, Seo JA, Park HS, Park J, Min BR |
1214 - 1220 |
Piezoelectric properties of template-free electrochemically grown ZnO nanorod arrays Tamvakos D, Lepadatu S, Antohe VA, Tamvakos A, Weaver PM, Piraux L, Cain MG, Pullini D |
1221 - 1228 |
In vitro hemocompatibility of sulfonated polypropylene non-woven fabric prepared via a facile gamma-ray pre-irradiation grafting method Li R, Wu GZ, Ye Y |
1229 - 1233 |
Acid-base equilibria of multilayered pseudo-polyelectrolytes Mateo AE, Priefer R |
1234 - 1243 |
Structure, corrosion resistance and in vitro bioactivity of Ca and P containing TiO2 coating fabricated on NiTi alloy by plasma electrolytic oxidation Wang HR, Liu F, Xiong XB, Ke SM, Zeng XR, Lin P |
1244 - 1251 |
Microstructure and tribological properties of Zr-based amorphous-nanocrystalline coatings deposited on the surface of titanium alloys by Electrospark Deposition Hong X, Tan YF, Zhou CH, Xu T, Zhang ZW |
1252 - 1261 |
A density functional theory study on the conversion of ethylene to carbon monomer on PdAu(100) surface Zhang MH, Yang B, Yu YZ |
1262 - 1271 |
Molecular simulation of preferential adsorption of CO2 over CH4 in Na-montmorillonite clay material Yang NN, Liu SY, Yang XN |
1272 - 1281 |
Structure and microstructure dependent transport and magnetic properties of sol-gel grown nanostructured La0.6Nd0.1Sr0.3MnO3 manganites: Role of oxygen Kansara SB, Dhruv D, Joshi Z, Pandya DD, Rayaprol S, Solanki PS, Kuberkar DG, Shah NA |
1282 - 1288 |
Redox and pH dual-responsive mesoporous silica nanoparticles for site-specific drug delivery Wang Y, Cui Y, Huang JH, Di DH, Dong YY, Zhang XJ, Zhao QF, Han N, Gao YK, Jiang TY, Wang SL |
1289 - 1299 |
Gold-nanoparticle-modified TiO2 nanowires for plasmon-enhanced photocatalytic CO2 reduction with H-2 under visible light irradiation Tahir M, Tahir B, Amin NAS |
1300 - 1305 |
Direct transfer of graphene films for polyurethane substrate Vilani C, Romani EC, Larrude DG, Barbosa GM, Freire FL |
1306 - 1313 |
1-Aminoanthraquinone bridged small Pt nanoparticles on carbon nanotubes as efficient electrocatalysts Feng X, Huang H, Du CC, Wang XL, Wang R, Song WB |
1314 - 1319 |
Top-down patterning and self-assembly of flower-like gold arrays for surface enhanced Raman spectroscopy Wang ZZ, Feng ZH, Lin L, Huang PP, Zheng ZQ |
1320 - 1326 |
Methane decomposition over Pd promoted Ni/MgAl2O4 catalysts for the production of COx free hydrogen and multiwalled carbon nanotubes Pudukudy M, Yaakob Z, Takriff MS |
1327 - 1340 |
Mesoporous silica materials with different structures as the carriers for antimicrobial agent. Modeling of chlorhexidine adsorption and release Moritz M, Geszke-Moritz M |
1341 - 1348 |
Synthesis and structure of BiPbO2Cl nanosheet with enhanced visible light photocatalytic activity Zhong WW, Li DD, Jin SF, Wang WJ, Yang XA |