1 - 11 |
Use of statistical design of experiments in the optimization of Ar-O-2 low-pressure plasma treatment conditions of polydimethylsiloxane (PDMS) for increasing polarity and adhesion, and inhibiting hydrophobic recovery Butron-Garcia MI, Jofre-Reche JA, Martin-Martinez JM |
12 - 21 |
Development of nano SiO2 incorporated nano zinc phosphate coatings on mild steel Tamilselvi M, Kamaraj P, Arthanareeswari M, Devikala S, Selvi JA |
22 - 31 |
Manipulating surface wettability and oil absorbency of diatomite depending on processing and ambient conditions Ozen I, Simsek S, Okyay G |
32 - 39 |
Fabrication of porous 3D flower-like Ag/ZnO heterostructure composites with enhanced photocatalytic performance Liang YM, Guo N, Li LL, Li RQ, Ji GJ, Gan SC |
40 - 46 |
Polyaniline nanofiber/large mesoporous carbon composites as electrode materials for supercapacitors Liu H, Xu B, Jia MQ, Zhang M, Cao B, Zhao XN, Wang Y |
47 - 54 |
Surface defects control for ZnO nanorods synthesized by quenching and their anti-recombination in photocatalysis Fang JW, Fan HQ, Ma Y, Wang Z, Chang Q |
55 - 61 |
Memory programming of TiO2-x films by Conductive Atomic Force Microscopy evidencing filamentary resistive switching Bousoulasa P, Giannopoulos J, Giannakopoulos K, Dimitrakis P, Tsoukalas D |
62 - 69 |
Preparation and characterization of chitosan-silver/hydroxyapatite composite coatings onTiO(2) nanotube for biomedical applications Yan YJ, Zhang XJ, Li CX, Huang Y, Ding QQ, Pang XF |
70 - 75 |
Effect of cation substitution on the magnetic and magnetotransport properties of epitaxial Fe3-xVxO4 films Jin C, Liu J, Zheng D, Tang M, Li P, Bai HL |
76 - 79 |
Surfactant-assisted solvothermal synthesis of single-crystal zinc antimonide nanorods Zhong MZ, Meng XQ, Li JB |
80 - 88 |
Mechanical property and wear performance dependence on processing condition for cold-sprayed WC-(nanoWC-Co) Yang GJ, Gao PH, Li CX, Li CJ |
89 - 96 |
Adsorption of alginate and albumin on aluminum coatings inhibits adhesion of Escherichia coli and enhances the anti-corrosion performances of the coatings He XY, Liu Y, Huang J, Chen XY, Ren K, Li H |
97 - 104 |
Interactions between excitation and extraction modes in an organic-based plasmon-emitting diode Chiu NF, Le Ster M, Yang CD, Tseng MH, Tsai FY |
105 - 111 |
Si-decorated graphene: A promising media for molecular hydrogen storage Ganji MD, Emami SN, Khosravi A, Abbasi M |
112 - 120 |
Preparation of SnO2-coated Ni microsphere composites with controlled microwave absorption properties Zhao B, Shao G, Fan BB, Guo WH, Chen YQ, Zhang R |
121 - 129 |
Synthesis and adsorption performance of Mg(OH)(2) hexagonal nanosheet-graphene oxide composites Liu MD, Xu J, Cheng B, Ho WK, Yu JG |
130 - 137 |
Selective catalytic reduction of NO with NH3 over CeO2-ZrO2-WO3 catalysts prepared by different methods Ning P, Song ZX, Li H, Zhang QL, Liu X, Zhang JH, Tang XS, Huang ZZ |
138 - 146 |
Enhancement of visible-light photocatalytic activity of silver and mesoporous carbon co-modified Bi2WO6 Zhao Q, Gong M, Liu WP, Mao YL, Le SK, Ju S, Long F, Liu XF, Liu K, Jiang TS |
147 - 151 |
A first-principles study of n-type and p-type doping of germanium carbide sheet Gokce AG, Akturk E |
152 - 158 |
Nanostructured'Anastacia' flowers for Zn coating by electrodepositing ZnO at room temperature Alves MM, Santos CF, Carmezim MJ, Montemor MF |
159 - 166 |
Synthesis of porous molecularly imprinted polymers for selective adsorption of glutathione Song RY, Hu XL, Guan P, Li J, Qian LW, Wang CL, Wang QL |
167 - 171 |
Polyethylenimine-incorporated zeolite 13X with mesoporosity for post-combustion CO2 capture Chen C, Kim SS, Cho WS, Ahn WS |
172 - 180 |
Effect of calcination temperature on the structure and visible-light photocatalytic activities of (N, S and C) co-doped TiO2 nano-materials Lei XF, Xue XX, Yang H, Chen C, Li X, Niu MC, Gao XY, Yang YT |
181 - 185 |
Short chain molecular junctions: Charge transport versus dipole moment Ikram IM, Rabinal MK |
186 - 191 |
Evaluation of UV-permeability and photo-oxidisability of organic ultraviolet radiation-absorbing coatings Li N, Chen YH, Bao YJ, Zhang ZQ, Wu ZX, Chen ZM |
192 - 197 |
Nanostructued core-shell Sn nanowires @ CNTs with controllable thickness of CNT shells for lithium ion battery Zhong Y, Li XF, Zhang Y, Li RY, Cai M, Sun XL |
198 - 204 |
X-ray photoelectron spectroscopy and luminescent properties of Y2O3:Bi3+ phosphor Jafer RM, Coetsee E, Yousif A, Kroon RE, Ntwaeaborwa OM, Swart HC |
205 - 214 |
Exploring microstructure and surface features of Chinese coins using non-invasive approaches Xie RS, Li YL, Guo BG, Hu HL, Jiang LH |
215 - 223 |
Strengthening and toughening of poly(L-lactide) composites by surface modified MgO whiskers Wen W, Luo BH, Qin XP, Li CR, Liu MX, Ding S, Zhou CR |
224 - 228 |
Mophology-modulations of TiO2 nanostructures for enhanced photocatalytic performance Zhang Q, Ma LS, Zhao QQ, Li ZP, Xu XJ |
229 - 236 |
Surface plasmon resonance for detecting clenbuterol: Influence of monolayer structure Suherman, Morita K, Kawaguchi T |
237 - 246 |
Polymer masks for structured surface and plasma etching Vital A, Vayer M, Sinturel C, Tillocher T, Lefaucheux P, Dussart R |
247 - 252 |
The preparation and electrochemical characterization of urchin-like NiCo2O4 nanostructures Dong JY, Zhang XT |
253 - 259 |
Characterization of surface chemistry and crystallization behavior of polypropylene composites reinforced with wood flour, cellulose, and lignin during accelerated weathering Peng Y, Liu R, Cao JZ |
260 - 265 |
Nano-donuts on metal surfaces Rai A, Nayak J, Barman SR |
266 - 271 |
Performance of solar cells fabricated on black multicrystalline Si by nanowire decoration Es F, Ciftpinar EH, Demircioglu O, Gunoven M, Kulakci M, Turan R |
272 - 280 |
Effect of chemical heterogeneity on photoluminescence of graphite oxide treated with S-/N-containing modifiers Ebrahim AM, Rodriguez-Castellon E, Montenegro JM, Bandosz TJ |
281 - 286 |
mu-PIXE mapping of archeological glazed pottery from Egypt Sadek H |
287 - 294 |
Fabrication of honeycomb-structured poly(ethylene glycol)-block-poly(lactic acid) porous films and biomedical applications for cell growth Yao BJ, Zhu QZ, Yao LL, Hao JC |
295 - 299 |
Improvement of the tribological performance in corrosive environment of CoCr alloy by TiSiON coatings Dinu M, Cojocaru M, Braic V, Tarcolea M, Braic M, Miculescu F, Vladescu A, Cotrut CM |
300 - 307 |
Layer-by-layer assembly of graphene oxide on polypropylene macroporous membranes via click chemistry to improve antibacterial and antifouling performance Zhang ZB, Wu JJ, Su Y, Zhou J, Gao Y, Yu HY, Gu JS |
308 - 317 |
CD44-engineered mesoporous silica nanoparticles for overcoming multidrug resistance in breast cancer Wang X, Liu Y, Wang SJ, Shi DH, Zhou XG, Wang CY, Wu J, Zeng ZY, Li YJ, Sun J, Wang JD, Zhang LJ, Teng ZG, Lu GM |
318 - 327 |
Structure analysis of layer-by-layer multilayer films of colloidal particles Batys P, Nosek M, Weronski P |
328 - 339 |
Poorly crystalline hydroxyapatite: A novel adsorbent for enhanced fulvic acid removal from aqueous solution Wei W, Yang L, Zhong WH, Cui J, Wei ZG |
340 - 345 |
Sandwich-structured Cu2O photodetectors enhanced by localized surface plasmon resonances Jia R, Lin GJ, Zhao DF, Zhang Q, Lin XY, Gao NK, Liu D |
346 - 353 |
High N-content a-C:N films elaborated by femtosecond PLD with plasma assistance Maddi C, Donnet C, Loir AS, Tite T, Barnier V, Rojas TC, Sanchez-Lopez JC, Wolski K, Garrelie F |
354 - 361 |
Hydrothermal synthesis of magnetic mesoporous carbon microspheres from carboxymethylcellulose and nickel acetate Wu Q, Li W, Tan J, Nan X, Liu SX |
362 - 367 |
Oxidation of conventional and nanostructured 8 wt.% yttria-stabilized zirconia coating surface coatings on gamma-TiAl Zeng SW, Zhao AM, Jiang HT |
368 - 378 |
Biomimetic hierarchical growth and self-assembly of hydroxyapatite/titania nanocomposite coatings and their biomedical applications Nathanael AJ, Im YM, Oh TH, Yuvakkumar R, Mangalaraj D |
379 - 383 |
PdCl2-loading mesoporous copper oxide as a novel and environmentally friendly catalyst for diethyl carbonate synthesis Zhang PB, Zhou Y, Fan MM, Jiang PP |
384 - 392 |
Theoretical and experimental investigations on corrosion control of 65Cu-35Zn brass in nitric acid by two thiophenol derivatives Ebrahimzadeh M, Gholami M, Momeni M, Kosari A, Moayed MH, Davoodi A |
393 - 402 |
Assembly route toward raspberry-like composite particles and their controlled surface wettability through varied dual-size binary roughness Fan X, Niu L, Wu YH, Cheng J, Yang ZR |
403 - 408 |
Characterization of PTCDA nanocrystals on Ge(001):H-(2 x 1) surfaces Zebari AAA, Kolmer M, Prauzner-Bechcicki JS |
409 - 418 |
Role of different Pd/Pt ensembles in determining CO chemisorption on Au-based bimetallic alloys: A first-principles study Ham HC, Manogaran D, Hwang GS, Han J, Kim HJ, Nam SW, Lim TH |
419 - 429 |
Fabrication of novel Ag3PO4/BiOBr heterojunction with high stability and enhanced visible-light-driven photocatalytic activity Mehraj O, Mir NA, Pirzada BM, Sabir S |
430 - 439 |
Designing and preparation of cytisine alkaloid surface-imprinted material and its molecular recognition characteristics Gao BJ, Bi CC, Fan L |
440 - 455 |
Application of Minkowski layer for intergranular fractal surfaces of multiphase active microalloyed and alloyed aluminium-silicate ceramics Purenovic JM, Randjelovic MS, Matovic BZ, Purenovic MM |
456 - 462 |
A novel reusable nanocomposite: FeOOH/CBC and its adsorptive property for methyl orange Wang ZP, Ma YJ, He HL, Pei CH, He P |
463 - 472 |
Synthesis and characterization of a surface-grafted Cd(II) ion-imprinted polymer for selective separation of Cd(II) ion from aqueous solution Li M, Feng CG, Li MY, Zeng QX, Gan Q, Yang HY |
473 - 479 |
Comparative study on friction force pattern anisotropy of graphite Liu ZH, Wang WX, Liu LQ |
480 - 487 |
A new method to improve the corrosion resistance of titanium for hydrometallurgical applications Liu J, Alfantazi A, Asselin E |
488 - 493 |
Improved wettability and adhesion of polylactic acid/chitosan coating for bio-based multilayer film development Gartner H, Li Y, Almenar E |
494 - 499 |
Thickness dependent structural, optical and electrical properties of Ti-doped ZnO films prepared by atomic layer deposition Bergum K, Fjellvag H, Nilsen O |
500 - 506 |
Inkjet printing of UHF antennas on corrugated cardboards for packaging applications Sowade E, Gothel F, Zichner R, Baumann RR |
507 - 512 |
The effect of surface oxidized modification on the mechanical properties of SiC3D/Al Xue LY, Wang FC, Ma Z, Wang YW |
513 - 517 |
Nanosecond laser micro- and nanotexturing for the design of a superhydrophobic coating robust against long-term contact with water, cavitation, and abrasion Emelyanenko AM, Shagieva FM, Domantovsky AG, Boinovich LB |
518 - 524 |
A robust superhydrophobic PVDF composite coating with wear/corrosion-resistance properties Wang HY, Liu ZJ, Wang EQ, Yuan RX, Gao D, Zhang XG, Zhu YJ |
525 - 532 |
Comparison of AlCrN and AlCrTiSiN coatings deposited on the surface of plasma nitrocarburized high carbon steels Chen WL, Zheng J, Lin Y, Kwon S, Zhang SH |
533 - 541 |
Oxygen incorporation into GST phase-change memory matrix Golovchak R, Choi YG, Kozyukhin S, Chigirinsky Y, Kovalskiy A, Xiong-Skiba P, Trimble J, Pafchek R, Jain H |
542 - 548 |
Highly bioactive polysiloxane modified bioactive glass-poly(ethylene glycol) hybrids monoliths with controlled surface structure for bone tissue regeneration Chen J, Que WX, Xing YL, Lei B |
549 - 556 |
Indium-free Cu/fluorine doped ZnO composite transparent conductive electrodes with stretchable and flexible performance on poly(ethylene terephthalate) substrate Han J, Gong HB, Yang XP, Qiu ZW, Zi M, Qiu XF, Wang HQ, Cao BQ |
557 - 564 |
A tribological study of the petaloid surface texturing for Co-Cr-Mo alloy artificial joints Zhang H, Qin LG, Hua M, Dong GN, Chin KS |
565 - 572 |
Multifunctional wood materials with magnetic, superhydrophobic and anti-ultraviolet properties Gan WT, Gao LK, Sun QF, Jin CD, Lu Y, Li J |
573 - 580 |
Improved visible light photocatalytic activity of fluorine and nitrogen co-doped TiO2 with tunable nanoparticle size Cheng JY, Chen J, Lin W, Liu YD, Kong Y |
581 - 590 |
Facile fabrication of hierarchical ZnO microstructures assisted with PAMPSA and enhancement of green emission Huang Q, Cun TX, Zuo WB, Liu JP |
591 - 598 |
Calculation and synthesis of ZrC by CVD from ZrCl4-C3H6-H-2-Ar system with high H-2 percentage Zhu Y, Cheng LF, Ma BS, Gao S, Feng W, Liu YS, Zhang LT |
599 - 605 |
Stability of core-shell nanowires in selected model solutions Kalska-Szostko B, Wykowska U, Basa A, Zambrzycka E |
606 - 613 |
Hexadimethrine-montmorillonite nanocomposite: Characterization and application as a pesticide adsorbent Gamiz B, Hermosin MC, Cornejo J, Celis R |
614 - 619 |
A novel surface-enhanced Raman spectroscopy substrate based on hybrid structure of monolayer graphene and Cu nanoparticles for adenosine detection Qiu HW, Xu SC, Chen PX, Gao SS, Li Z, Zhang C, Jiang SZ, Liu M, Li HS, Feng DJ |
620 - 624 |
Electrically pumped random lasing from hydrothermal ZnO films of large grains Wang CX, Zhu C, Lv CY, Li DS, Ma XY, Yang DR |
625 - 630 |
Novel band gap-tunable K-Na co-doped graphitic carbon nitride prepared by molten salt method Zhao JN, Ma L, Wang HY, Zhao YF, Zhang J, Hu SZ |
631 - 639 |
Controlling the partitioning behavior of magnetic micro-particles via hydrophobization with alkylamines: Tailored adsorbents for continuous bioseparation Paulus A, Till N, Franzreb M |
640 - 647 |
Structural and elastic properties and stability characteristics of oxygenated carbon nanotubes under physical adsorption of polymers Ansari R, Ajori S, Rouhi S |
648 - 656 |
A novel non-enzymatic H2O2 sensor based on polypyrrole nanofibers-silver nanoparticles decorated reduced graphene oxide nano composites Nia PM, Lorestani F, Meng WP, AliasDepartment Y |
657 - 664 |
Synthesis and surface characterization of a patterned cuprite sample: Preparatory step in the evaluation scheme of an X-ray-excited optical microscopy system Sabbe PJ, Dowsett MG, De Keersmaecker M, Hand M, Thompson P, Adriaens A |
665 - 673 |
Optimizing the photocatalytic properties and the synergistic effects of graphene and nano titanium dioxide immobilized on cotton fabric Karimi L, Yazdanshenas ME, Khajavi R, Rashidi A, Mirjalili M |
674 - 681 |
Fabrication and dye removal performance of magnetic CuFe2O4@CeO2 nanofibers Zou LL, Wang QJ, Shen XQ, Wang Z, Jing MX, Luo Z |
682 - 693 |
One-pot solvothermal preparation and enhanced photocatalytic activity of metallic silver and graphene co-doped BiVO4 ternary systems Xu L, Wei YG, Guo W, Guo YH, Guo YN |
694 - 698 |
Resistivity and Hall voltage in gold thin films deposited on mica at room temperature Bahamondes S, Donoso S, Ibanez-Landeta A, Flores M, Henriquez R |
699 - 703 |
Interaction of Al with O-2 exposed Mo2BC Bolvardi H, Music D, Schneider JM |
704 - 709 |
Changes in mechanical and chemical wood properties by electron beam irradiation Schnabel T, Huber H, Grunewald TA, Petutschnigg A |
710 - 715 |
The influence of ultrathin Cu interlayer in NiFe/IrMn interface on rotation of the magnetic moments Zhao ZD, Li MH, Kang P, Zhao CJ, Zhang JY, Zhou LJ, Zhao YC, Jiang SL, Yu GH |
716 - 719 |
Efficient bulk heterojunction organic solar cell with antireflective subwavelength structure Kim DS, Kwon S, Lee K, Jang JH |
720 - 725 |
Surface modifying of SiC particles and performance analysis of SiCp/Cu composites Hu M, Zhang YL, Tang LL, Shan L, Gao J, Ding PL |
726 - 735 |
Studies of dense electronic excitation-induced modification in crystalline Fe-doped SnO2 thin films Jaiswal MK, Kumar R, Kanjilal D, Dong CL, Chen CL, Asokan K, Ojha S |
736 - 746 |
Characterization of Ni and W co-loaded SBA-15 catalyst and its hydrogen production catalytic ability on ethanol steam reforming reaction Kim D, Kwak BS, Min BK, Kang M |
747 - 755 |
Impact of Rh-CeOx interaction on CO oxidation mechanisms Sevcikova K, Kolarova T, Skala T, Tsud N, Vaclavu M, Lykhach Y, Matolin V, Nehasil V |
756 - 760 |
A new understanding of carbon nanotube growth: Different functions of carbon species Zhang YL, Wang BJ, Yu Q, Tian YJ |