| 8041 - 8051 |
Self-healing coatings in anti-corrosion applications
Stankiewicz A, Szczygiel I, Szczygiel B |
| 8052 - 8059 |
Copper-oxide whisker growth on tin-copper alloy coatings caused by the corrosion of Cu6Sn5 intermetallics
Horvath B, Illes B, Shinohara T, Harsanyi G |
| 8060 - 8067 |
Microwave absorption response of nickel/graphene nanocomposites prepared by electrodeposition
Fang JJ, Zha WK, Kang M, Lu SH, Cui L, Li SF |
| 8068 - 8076 |
Preparation of porous glass films using phase separation phenomenon and growth behavior of phase-separated structure
Hwang C, Kim J, Ryu BK, Takebe H |
| 8077 - 8083 |
Oxygen storage and release behavior of delafossite-type CuFe1-x Al (x) O-2
Kato S, Suzuki S, Kawashima R, Ogasawara M, Wakabayashi T, Nakahara Y, Nakata S |
| 8084 - 8100 |
Structural aspects of changes induced in PbTe by doping with Mn, In and Ga
Radisavljevic I, Ivanovic N, Novakovic N, Romcevic N, Mitric M, Andric V, Mahnke HE |
| 8101 - 8107 |
Facile preparation of nitrogen-doped reduced graphene oxide as a metal-free catalyst for oxygen reduction reaction
Lu ZJ, Xu MW, Bao SJ, Tan K, Chai H, Cai CJ, Ji CC, Zhang Q |
| 8108 - 8116 |
Design of low temperature self-cured phthalonitrile-based polymers for advanced glass fiber composite laminates
Xu MZ, Liu MD, Dong SH, Liu XB |
| 8117 - 8132 |
The effect of strontium (Sr) on the ignition temperature of magnesium (Mg): a look at the pre-ignition stage of Mg-6 wt% Sr
Aydin DS, Bayindir Z, Pekguleryuz MO |
| 8133 - 8139 |
The influence of ionic radii on the grain growth and sintering-resistance of Ln(2)Ce(2)O(7) (Ln = La, Nd, Sm, Gd)
Wang CJ, Wang Y, Zhang AH, Cheng YL, Chi F, Yu Z |
| 8140 - 8146 |
Scaling of conductivity and Young's modulus in replicated microcellular materials
Mortensen A, Conde Y, Rossoll A, San Marchi C |
| 8147 - 8152 |
Fabrication and dielectric properties of Na0.5Bi0.5Cu3Ti4O12/poly(vinylidene fluoride) composites
Su YL, Sun C, Zhang WQ, Huang H |
| 8153 - 8162 |
Synthesis and optimization of P(MMA-BA-MAA)/PEG-based polymer gel electrolytes
Song CM, Zhang L, Wang YG, Yan X, Zhao D |
| 8163 - 8170 |
High temperature magnetic properties of Sm-Co and Sm-Co/polyamide-12 materials: effects of temperature, particle size, and silanization
Qadeer MI, Savage SJ, Hedenqvist MS |
| 8171 - 8198 |
Analysis of heat-treated graphite oxide by X-ray photoelectron spectroscopy
Yamada Y, Yasuda H, Murota K, Nakamura M, Sodesawa T, Sato S |
| 8199 - 8208 |
Incorporation of photocatalytic function into nonwoven polyester fabrics via impregnation with peroxo titanic acid solution
Takahashi T, Aso Y, Yoshino K |
| 8209 - 8214 |
Characterization of polypropylene treated under dual-RF plasma using terahertz time-domain spectroscopy
Akbar D, Altan H |
| 8215 - 8227 |
Anti-microbial and anti-corrosive poly (ester amide urethane) siloxane modified ZnO hybrid coatings from Thevetia peruviana seed oil
Siyanbola TO, Sasidhar K, Anjaneyulu B, Kumar KP, Rao BVSK, Narayan R, Olaofe O, Akintayo ET, Raju KVSN |
| 8228 - 8234 |
Surface modification of YAG:Ce3+ nanoparticles by poly(acrylic acid) and their biological application
Asakura R, Isobe T |
| 8235 - 8243 |
Elastic, optoelectronic, and thermal properties of cubic CSi2N4: an ab initio study
Haddou A, Khachai H, Khenata R, Litimein F, Bouhemadou A, Murtaza G, Alahmed ZA, Bin-Omran S, Abbar B |
| 8244 - 8258 |
High-temperature elastic moduli of thermoelectric SnTe1 +/- x - y SiC nanoparticulate composites
Schmidt RD, Case ED, Ni JE, Trejo RM, Lara-Curzio E, Korkosz RJ, Kanatzidis MG |
| 8259 - 8267 |
First principles study of electronic and optical properties of Cu2ZnSnX4 (X = S, Se) solar absorbers by Tran-Blaha-modified Becke-Johnson potential approach
Ghosh A, Thangavel R, Rajagopalan M |
| 8268 - 8276 |
Spectrally selective absorber coating from transition metal complex for efficient photothermal conversion
Pal S, Diso D, Franza S, Licciulli A, Rizzo L |
| 8277 - 8286 |
One pot synthesis of a highly water-dispersible hybrid glucose carbides and reduced graphene oxide material with superior electrical capacitance
Sun J, Teng XY, Yang JX, Bi H |
| 8287 - 8291 |
Dielectric and electromechanical properties of Mn-doped 0.2875 Pb(Mg1/3Nb2/3)O-3-0.2875 Pb(Yb1/2Nb1/2)O-3-0.425 PbTiO3 ceramics
Akca E, Tatar I, Duran C |
| 8292 - 8301 |
Melt blend studies of nanoclay-filled polypropylene (PP)-high-density polyethylene (HDPE) composites
Mohan TP, Kanny K |
| 8302 - 8307 |
Synthesis of nickel picrate energetic film in a 3D ordered silicon microchannel plate through an in situ chemical reaction
Zhang WC, Xu B, Wang LW, Wang XW, Thomas JA, Chao YM |
| 8308 - 8319 |
Characterisation and modelling of the elastic properties of poly(lactic acid) nanofibre scaffolds
Gomez-Pachon EY, Sanchez-Arevalo FM, Sabina FJ, Maciel-Cerda A, Campos RM, Batina N, Morales-Reyes I, Vera-Graziano R |
| 8320 - 8328 |
A hybrid gas-sensing material based on porous carbon fibers and a TiO2 photocatalyst
Yun J, Kim HI, Lee YS |
| 8329 - 8336 |
Influence of a hydrophobin underlayer on the structuring and antimicrobial properties of ZnO films
Popescu AC, Stan GE, Duta L, Dorcioman G, Iordache O, Dumitrescu I, Pasuk I, Mihailescu IN |
