| 423 - 424 |
5th Brazilian MRS meeting - Preface
Solorzano G |
| 425 - 433 |
Effect of alpha prime due to 475 degrees C aging on fracture behavior and corrosion resistance of DIN 1.4575 and MA 956 high performance ferritic stainless steels
Terada M, Hupalo MF, Costa I, Padilha AF |
| 434 - 439 |
Adsorption of phenylalanine on layered double hydroxides: effect of temperature and ionic strength
Silverio F, dos Reis MJ, Tronto J, Valim JB |
| 440 - 449 |
Rh/CeO2 catalyst preparation and characterization for hydrogen production from ethanol partial oxidation
Costa LOO, Vasconcelos SMR, Pinto AL, Silva AM, Mattos LV, Noronha FB, Borges LEP |
| 450 - 463 |
Small-angle X-ray scattering and FTIR characterization of nanostructured poly (vinyl alcohol)/silicate hybrids for immunoassay applications
Andrade GI, Barbosa-Stancioli EF, Mansur AAP, Vasconcelos WL, Mansur HS |
| 464 - 468 |
Luminescence of SrAl2O4 center dot Cr3+
Lopez A, da Silva MG, Baggio-Saitovitch E, Camara AR, Silveira RN, da Fonseca RJM |
| 469 - 474 |
Production and characterization of sub micrometer hollow Ni-P spheres by chemical reduction: the influence of pH and amphiphilic concentration
Bernardi C, Drago V, Bernardo FL, Girardi D, Klein AN |
| 475 - 482 |
Electrochemical and morphologic studies of nickel incorporation on graphite electrodes modified with polytyramine
de Castro CM, Vieira SN, Goncalves RA, Brito-Madurro AG, Madurro JM |
| 483 - 488 |
Modeling of glass sintering applied for the fabrication of porous glass bodies
Barg S, Koch D, Pulkin M, Grathwohl G |
| 489 - 493 |
Performance of curaua fibers in pullout tests
Monteiro SN, Aquino RCMP, Lopes FPD |
| 494 - 502 |
Sol-gel derived composite from bioactive glass-polyvinyl alcohol
Costa HS, Rocha MF, Andrade GI, Barbosa-Stancioli EF, Pereira MM, Orefice RL, Vasconcelos WL, Mansur HS |
| 503 - 509 |
Ac and dc magnetotransport properties of the phase-separated La0.6Y0.1Ca0.3MnO3 manganite
Fonseca FC, Souza JA, Muccillo ENS, Muccillo R, Jardim RF |
| 510 - 524 |
Morphological, mechanical, and biocompatibility characterization of macroporous alumina scaffolds coated with calcium phosphate/PVA
Costa HS, Mansur AAP, Barbosa-Stancioli EF, Pereira MM, Mansur HS |
| 525 - 529 |
Optical and structural properties of PbI2 thin films
Condeles JF, Ando RA, Mulato M |
| 530 - 535 |
Role of rare earth oxide coatings on oxidation resistance of chromia-forming alloys
Ramanathan LV, Pillis MF, Fernandes SMC |
| 536 - 540 |
Influence of stabilization heat treatments on microstructure, hardness and intergranular corrosion resistance of the AISI 321 stainless steel
Moura V, Kina AY, Tavares SSM, Lima LD, Mainier FB |
| 541 - 545 |
Synthesis and characterization of semiconductor polymers having different phenylene-vinylene conjugation lengths
Schuler TE, Wang SH, Possidonio S, Onmori RK |
| 546 - 550 |
Cerium-based phosphors: blue luminescent properties for applications in optical displays
Gomes J, Serra OA |
| 551 - 556 |
Lanthanum-based perovskites obtained by the polymeric precursor method
Melo DS, Marinho EP, Soledade LEB, Melo DMA, Lima SJG, Longo E, Santos IMG, Souza AG |
| 557 - 567 |
Purification of catalytically produced carbon nanotubes for use as support for fuel cell cathode Pt catalyst
Rocco AM, da Silva CA, Macedo MIF, Maestro LF, Herbst MH, Solorzano G, Xavier AL |
| 568 - 572 |
Effects of non-uniform size distribution on the spectral optical gain properties of InGaAs/InGaAsP quantum dots
Mialichi JR, Frateschi NC |
| 573 - 579 |
Microtexture of chloride treated CdTe thin films deposited by CSS technique
Quadros J, Pinto AL, Moutinho HR, Dhere RG, Cruz LR |
| 580 - 584 |
PHBHV/PCL microspheres as biodegradable drug delivery systems (DDS) for photodynamic therapy (PDT)
Simioni AR, Vaccari C, Re MI, Tedesco AC |
| 585 - 590 |
Interchain interaction effects on polaron-bipolaron transition on conducting polymers
de Oliveira Queiroz JR, E Silva GM |
| 591 - 596 |
Electron beam effects on amorphous molybdenum oxide nanostructures grown by condensation in hydrogen
Diaz-Droguett DE, Fuenzalida VM, Diaz-Espinoza MS, Solorzano G |
| 597 - 601 |
The effect of polysiloxane on the properties of Al2O3-NbC composite material produced by pyrolysis process
Acchar W, Diniz M, Fonseca YAA, Sousa CRC, Lima ES |
| 602 - 608 |
Effect of scandium on the structural and photocatalytic properties of titanium dioxide thin films
Cavalheiro AA, Bruno JC, Saeki MJ, Valente JPS, Florentino AO |
| 609 - 613 |
Effect of processing conditions on the nucleation and growth of indium-tin-oxide nanowires made by pulsed laser ablation
Savu R, Joanni E |
| 614 - 620 |
Ostwald Ripening of precipitates and self similarity of size distributions in reaction controlled growth
Feldmann G, Fabrim ZE, Hennig GL |
| 621 - 634 |
Protonated niobate/titanate pyrochlores via lead-acid exchange in Pb1.5Nb2O6.5 and Pb2Nb1.33Ti0.67O6.67
Brune AB, Mangham RI, Petuskey WT |
| 635 - 640 |
On the crystallization kinetics and micro-structural transformations of Fe40Ni38B18Mo4 alloys
Hysen T, Senoy T, Ramanujan RV, Anantharaman MR |
| 641 - 644 |
Morphology-tunable synthesis of SrWO4 crystals via biomimetic supported liquid membrane (SLM) system
Dong FQ, Wu QS, Sun DM, Ding YP |
| 645 - 651 |
Effect of deposition pressure on the adhesion and tribological properties of a-CNx H films prepared by DC-RF-PECVD
Ding J, Hao JY, Xue QJ, Liu WM |
| 652 - 659 |
Freeze cast carbon nanotube-alumina nanoparticle green composites
Lu K |
| 660 - 664 |
Structural and magnetic properties of FeCr2S4 spinel prepared by field-activated sintering and conventional solid-state synthesis
Zestrea V, Kodash VY, Felea V, Petrenco P, Quach DV, Groza JR, Tsurkan V |
| 665 - 670 |
Pore structure in nickel created by ammonia at 873 K
Richardson DJ, Mason G, Hellgardt K, Russell PA, Buffham BA, Bates JS |
| 671 - 679 |
Microstructure and properties of ultrafine-grained and dispersion-strengthened titanium materials for implants
Handtrack D, Sauer C, Kieback B |
| 680 - 683 |
Cathodoluminescence characterization of rare earth doped composite materials based on porous GaP
Sanchez B, Mendez B, Piqueras J, Sirbu L, Tiginyanu IM, Ursaki VV |
| 684 - 688 |
Hot explosive compaction of diamond powder using cylindrical geometry
Hokamoto K, Pruemmer RA, Knitter R, Taira K |
| 689 - 695 |
Phase transformation of melamine at high pressure and temperature
Yu DL, He JL, Liu ZY, Xu B, Li DC, Tian YJ |
| 696 - 701 |
Predicting porosity content in triaxial porcelain bodies as a function of raw materials contents
Correia SL, Hotza D, Segadaes AM |
| 702 - 708 |
Ethylene vinyl acetate/expanded graphite nanocomposites by solution intercalation: preparation, characterization and properties
George JJ, Bhowmick AK |
| 709 - 714 |
A Rosen-type piezoelectric transformer employing lead-free K0.5Na0.5NbO3 ceramics
Guo M, Lam KH, Lin DM, Wang S, Kwok KW, Chan HLW, Zhao XZ |
| 715 - 720 |
Thermal stability of heat-treated flame-synthesized anatase TiO2 nanoparticles
Lee GW, Choi SM |
| 721 - 731 |
Tensile and flexural properties of injection-moulded short glass fibre and glass bead ABS composites in the presence of weldlines
Hashemi S |
| 732 - 737 |
An evaluation of nanostructured zinc oxide as a fluorescent powder for fingerprint detection
Choi MJ, McBean KE, Ng PHR, McDonagh AM, Maynard PJ, Lennard C, Roux C |
| 738 - 747 |
Synthesis and characterisation of soluble block copolymers from NR and TDI based polyurethanes
Nair MNR, Nair MRG |
| 748 - 758 |
Microstructural evolution and mechanical property in dual two-phase intermetallic alloys composed of geometrically close-packed Ni3X (X : Al and V) containing Nb
Kaneno Y, Soga W, Tsuda H, Takasugi T |
| 759 - 765 |
Microstructure and mechanical properties of fluorcanasite glass-ceramics for biomedical applications
Kanchanarat N, Bandyopadhyay-Ghosh S, Reaney IM, Brook IM, Hatton PV |
| 766 - 770 |
Dynamic mechanical property and photochemical stability of perlite/PVA and OMMT/PVA nanocomposites
Tian H, Tagaya H |
| 771 - 774 |
Synthesis of ultrafine amorphous Fe-B alloy nanoparticles using anodic aluminum oxide templates
Yan ZJ, Xue DS |
| 775 - 787 |
How to improve mechanical properties of polylactic acid with bamboo fibers
Tokoro R, Vu DM, Okubo K, Tanaka T, Fujii T, Fujiura T |
| 788 - 792 |
The effect of quenching medium on the wear behaviour of a Ti-6Al-4V alloy
Feng C, Khan TI |
| 793 - 798 |
On estimating Weibull modulus by moments and maximum likelihood methods
Tiryakioglu M |
| 799 - 801 |
Improvement of fracture energy of HA/PLLA biocomposite material due to press processing
Todo M, Kagawa T |
| 802 - 802 |
On estimating Weibull modulus by moments and maximum likelihood methods
Tiryakioglu M |
