| 3577 - 3596 |
Hydrogen South Africa (HySA) Systems Competence Centre: Mission, objectives, technological achievements and breakthroughs
Pollet BG, Pasupathi S, Swart G, Mouton K, Lototskyy M, Williams M, Bujlo P, Ji S, Bladergroen BJ, Linkov V |
| 3597 - 3605 |
Hydrogen evolution and corrosion products on iron cathodes in hot alkaline solution
Flis-Kabulska I, Flis J |
| 3606 - 3616 |
Stability of nickel catalyst supported by mesoporous alumina for hydrogen iodide decomposition and hybrid decomposer development in sulfur-iodine hydrogen production cycle
Choi JY, No HC, Kim YS |
| 3617 - 3624 |
Photodeposition of AuNPs on metal oxides: Study of SPR effect and photocatalytic activity
Rayalu SS, Jose D, Mangrulkar PA, Joshi M, Hippargi G, Shrestha K, Klabunde K |
| 3625 - 3636 |
Design and sizing of stand-alone photovoltaic hydrogen system for HCNG production
Tebibel H, Labed S |
| 3637 - 3648 |
Photoelectrochemical splitting of water with nanocrystalline Zn1-xMnxO thin films: First-principle DFT computations supporting the systematic experimental endeavor
Sharma V, Dixit M, Satsangi VR, Dass S, Pal S, Shrivastav R |
| 3649 - 3656 |
Hydrogen-rich gas from catalytic steam gasification of eucalyptus using nickel-loaded Thai brown coal char catalyst
Phuhiran C, Takarada T, Chaiklanginuang S |
| 3657 - 3665 |
Expression of the [FeFe] hydrogenase in the chloroplast of Chlamydomonas reinhardtii
Reifschneider-Wegner K, Kanygin A, Redding KE |
| 3666 - 3680 |
Conical-shaped foam reactors for catalytic partial oxidation applications
Navalho JEP, Pereira JMC, Pereira JCF |
| 3681 - 3689 |
Synthesis of an active and stable Pt-shell-Pd-core/C catalyst for the electro-oxidation of methanol
Choi I, Ahn SH, Kim MH, Kwon OJ, Kim JJ |
| 3690 - 3697 |
Hydrocracking of Jatropha oil over Ni-H3PW12O40/nano-hydroxyapatite catalyst
Fan K, Liu J, Yang XY, Rong L |
| 3698 - 3709 |
Hydrogen and multiwall carbon nanotubes production by catalytic decomposition of methane: Thermogravimetric analysis and scaling-up of Fe-Mo catalysts
Torres D, Pinilla JL, Lazaro MJ, Moliner R, Suelves I |
| 3710 - 3718 |
One-pot sonication-assisted polyol synthesis of trimetallic core-shell (Pd,Co)@Pt nanoparticles for enhanced electrocatalysis
Matin MA, Fang JH, Kwon YU |
| 3719 - 3729 |
Preferential CO oxidation on Pt-Cu/Al2O3 catalysts with low Pt loadings
Gomez LE, Sollier BM, Mizrahi MD, Lopez JMR, Miro EE, Boix AV |
| 3730 - 3738 |
Rapid room-temperature synthesis of Pd nanodendrites on reduced graphene oxide for catalytic oxidation of ethylene glycol and glycerol
Li SS, Hu YY, Feng JJ, Lv ZY, Chen JR, Wang AJ |
| 3739 - 3745 |
Synergy between isolated-Fe3O4 nanoparticles and CNx layers derived from lysine to improve the catalytic activity for oxygen reduction reaction
Yang HJ, Wang H, Ji S, Linkov V, Wang RF |
| 3746 - 3754 |
CuO/ZrO2 catalysts for water-gas shift reaction: Nature of catalytically active copper species
Zhang YJ, Chen CQ, Lin XY, Li DL, Chen XH, Zhan YY, Zheng Q |
| 3755 - 3761 |
High catalytic kinetic performance of amorphous CoPt NPs induced on CeOx for H-2 generation from hydrous hydrazine
Song-Il O, Yan JM, Wang HL, Wang ZL, Jiang Q |
| 3762 - 3770 |
Hydrogen production from carbon dioxide reforming of methane over highly active and stable MgO promoted Co-Ni/gamma-Al2O3 catalyst
Son IH, Lee SJ, Roh HS |
| 3771 - 3779 |
Elevated temperature hydrogen/carbon dioxide separation process simulation by integrating elementary reaction model of hydrotalcite adsorbent
Zheng Y, Shi YX, Li S, Yang Y, Cai NS |
| 3780 - 3789 |
High-capacity hydrogen storage in Li-decorated (AlN)(n) (n=12, 24, 36) nanocages
Wang GZ, Yuan HK, Kuang AL, Hu WF, Zhang GL, Chen H |
| 3790 - 3798 |
Hydrogen storage characteristics of the nanocrystalline and amorphous Mg-Nd-Ni-Cu-based alloys prepared by melt spinning
Zhang YH, Wang HT, Zhai TT, Yang T, Qi Y, Zhao DL |
| 3799 - 3804 |
Energy storage of thermally reduced graphene oxide
Kim JM, Hong WG, Lee SM, Chang SJ, Jun Y, Kim BH, Kim HJ |
| 3805 - 3809 |
Investigation of the thermodynamic and kinetic properties of La-Fe-B system hydrogen-storage alloys
Xiong W, Li BQ, Wang L, Li J, Kong FQ, Yan HZ |
| 3810 - 3821 |
Correlation between hydrogen storage properties and textures induced in magnesium through ECAP and cold rolling
Jorge AM, de Lima GF, Triques MRM, Botta WJ, Kiminami CS, Nogueira RP, Yavari AR, Langdon TG |
| 3822 - 3829 |
Solid-state synthesis of amorphous TiB2 nanoparticles on graphene nanosheets with enhanced catalytic dehydrogenation of MgH2
Liu G, Wang YJ, Jiao LF, Yuan HT |
| 3830 - 3836 |
A reactor model for hydrogen generation from sodium borohydride and water vapor
Yu L, Matthews MA |
| 3837 - 3854 |
An improved TLBO with elite strategy for parameters identification of PEM fuel cell and solar cell models
Niu Q, Zhang HY, Li K |
| 3855 - 3867 |
The development of an exchangeable PEMFC power module for electric vehicles
Wang FC, Peng CH |
| 3868 - 3878 |
Gas transport in hydrogen electrode of solid oxide regenerative fuel cells for power generation and hydrogen production
Yoon KJ, Lee SI, An H, Kim J, Son JW, Lee JH, Je HJ, Lee HW, Kim BK |
| 3879 - 3886 |
Carbon-resistant Ni-YSZ/Cu-CeO2-YSZ dual-layer hollow fiber anode for micro tubular solid oxide fuel cell
Meng XX, Gong X, Yang NT, Yin YM, Tan XY, Ma ZF |
| 3887 - 3894 |
Kinetics and electrochemical characteristics of Mg2NiH4-x wt.% MmNi(3.8)Co(0.75)Mn(0.4)Al(0.2) (x=5, 10, 20, 40) composites for Ni-MH battery
Pu ZG, Zhu YF, Zhu JY, Yuan JG, Zhang JG, Chen W, Fang JJ, Li LQ |
| 3895 - 3903 |
Effects of gamma-CoOOH coating on the high-temperature and high-rate performances of spherical nickel hydroxide electrodes
Guo D, Shangguan EB, Li J, Zhao TH, Chang ZR, Li QM, Yuan XZ, Wang HJ |
| 3904 - 3913 |
Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material
Qu ZG, Li WQ, Tao WQ |
| 3914 - 3925 |
Design exploration of three-dimensional transverse jet in a supersonic crossflow based on data mining and multi-objective design optimization approaches
Huang W |
| 3926 - 3935 |
The cavity profile of a diaphragm compressor for a hydrogen refueling station
Li JY, Jia XH, Wu ZM, Peng XY |
| 3936 - 3946 |
Effect of hydrogen and helium addition to fuel on soot formation in an axisymmetric coflow laminar methane/air diffusion flame
Liu FS, Ai YH, Kong WJ |
| 3947 - 3955 |
Flow characteristics of hydrogen gas through a critical nozzle
Ding HB, Wang C, Zhao YK |
| 3956 - 3962 |
Gas explosion field test with release of hydrogen from a high pressure reservoir into a channel
Rai K, Bjerketvedt D, Gaathaug AV |
| 3963 - 3963 |
Special Section Papers: Selected papers from CONAPPICE 2012 Preface
Daza L, Martin AJ |
| 3964 - 3969 |
Macroporous carbon as support for PtRu catalysts
Baena-Moncada AM, Coneo-Rodriguez R, Calderon JC, Florez-Montano J, Barber CA, Planes GA, Rodriguez JL, Pastor E |
| 3970 - 3977 |
Performance of PEMFC with new polyvinyl-ionic liquids based membranes as electrolytes
Diaz M, Ortiz A, Vilas M, Tojo E, Ortiz I |
| 3978 - 3983 |
Chemical activation of Vulcan (R) XC72R to be used as support for NiNbPtRu catalysts in PEM fuel cells
Antxustegi MM, Pierna AR, Ruiz N |
| 3984 - 3990 |
Trimetallic amorphous catalyst with low amount of platinum: Comparative study for ethanol, bioethanol and CO electrooxidation
Barroso J, Pierna AR, Blanco TC, Ruiz N |
| 3991 - 3996 |
Amorphous catalysts based on (NiNb)(99)(Pt X Y)(1) for DAFC using ethanol and bioethanol as fuels
Sanchez M, Pierna AR, Ruiz N, Barroso J, Del Val JJ |
| 3997 - 4004 |
Influence of the gas diffusion cathode structure on the performance of an air-breathing proton exchange membrane fuel cell
Ferreira-Aparicio P, Chaparro AM |
| 4005 - 4008 |
PEMFC impedance spectroscopy using synthetic wide-band signals
Cervera TG, Vega-Leal AP, Garcia GA, Sanchez JB |
| 4009 - 4015 |
Study of the electrochemical behaviour of a 300 W PEM fuel cell stack by Electrochemical Impedance Spectroscopy
Perez-Page M, Perez-Herranz V |
| 4016 - 4022 |
Synthesis and characterization of polysulfone/layered double hydroxides nanocomposite membranes for fuel cell application
Herrero M, Martos AM, Varez A, Galvan JC, Leuenfeld B |
| 4023 - 4029 |
Modification of a Nafion membrane by n-dodecyltrimethylammonium cation inclusion for potential application in DMFC
de Yuso MDM, Cuberes MT, Romero V, Neves L, Coelhoso I, Crespo JG, Rodriguez-Castellon E, Benauente J |
| 4030 - 4036 |
Consistent modeling of a single PEM fuel cell using Onsager's principle
Valino L, Mustata R, Duenas L |
| 4037 - 4043 |
Neuro-evolutionary approach applied for optimizing the PEMFC performance
Curteanu S, Piuleac CG, Linares JJ, Canizares P, Rodrigo MA, Lobato J |
| 4044 - 4052 |
Distributed parameter model simulation tool for PEM fuel cells
Sarmiento-Carnevali M, Serra M, Battle C |
| 4053 - 4059 |
Modelling of an HTPEM-based micro-combined heat and power fuel cell system with methanol
Romero-Pascual E, Soler J |
| 4060 - 4066 |
Study of a SOFC with a bimetallic Cu-Co-ceria anode directly fuelled with simulated biogas mixtures
Fuerte A, Valenzuela RX, Escudero MJ, Daza L |
| 4067 - 4073 |
New SrMo1-x,CrxO3-delta perovskites as anodes in solid-oxide fuel cells
Martinez-Coronado R, Alonso JA, Aguadero A, Fernandez-Diaz MT |
| 4074 - 4080 |
Microstructural improvements of the gradient composite material Pr(0.6)Sr(0.4)Fe(0.8)Co(0.2)O3/Ce0.8Sm0.2O1.9 by employing vertically aligned carbon nanotubes
Pinedo R, de Larramendi IR, Khavrus VO, de Aberasturi DJ, de Larramendi JIR, Ritscheld M, Leonhardt A, Rojo T |
| 4081 - 4088 |
Potential of molten carbonate fuel cells to reduce the carbon footprint of large reciprocating engines
Sanchez D, Ubertini S, de Escalona JMM, Chacartegui R |
| 4089 - 4094 |
Influence of the operating parameters over dry reforming of methane to syngas
Serrano-Lotina A, Daza L |
| 4095 - 4101 |
The water gas shift reaction over CeO2/CuO: Operando SSITKA-DRIFTS-mass spectrometry study of low temperature mechanism
Camara AL, Chansai S, Hardacre C, Martinez-Arias A |
| 4102 - 4108 |
Comparative study of CuO supported on CeO2, Ce0.8Zr0.2O2 and Ce0.8Al0.2O2 based catalysts in the CO-PROX reaction
Arango-Diaz A, Cecilia JA, Moretti E, Talon A, Nunez P, Marrero-Jerez J, Jimenez-Jimenez J, Jimenez-Lopez A, Rodriguez-Castellon E |
| 4109 - 4115 |
Carbon supports for the catalytic dehydrogenation of liquid organic hydrides as hydrogen storage and delivery system
Sebastian D, Alegre C, Calvillo L, Perez M, Moliner R, Lazaro MJ |
| 4116 - 4122 |
Roll-out of hydrogen fueling stations in Spain through a procedure based on data envelopment analysis
Brey JJ, Brey R, Contreras I, Carazo AF |
| 4123 - 4130 |
Analysis of a hydrogen station roll-out strategy to introduce hydrogen vehicles in Andalusia
Brey JJ, Carazo AF, Brey R |
| 4131 - 4142 |
Catalytic burner with internal steam generation for a fuel-cell-based auxiliary power unit for middle distillates
Meissner J, Pasel J, Samsun RC, Scharf F, Wiethege C, Peters R |
| 4143 - 4149 |
Preliminary study for the adequacy and implementation of a hydrogen laboratory
Nieto B, Manjavacas G, Merino C, Quintana R |
