Nanocomposite materials were obtained using sorbitol plasticized waxy maize starch as matrix and tunicin whiskers as the reinforcement. The effect of filler load (0-25 wt % whiskers) and the relative humidity levels (0-98%) on the mechanical behavior of the films are discussed for linear and nonlinear deformation. The performance of the films is explained, based on the morphology and structural behavior of the composite materials (Mathew and Dufresne, Biomacromolecules 2002, 3, 609). The nanocomposites exhibit good mechanical strength due to the strong interaction between tunicin whiskers, matrix, plasticizer (sorbitol), and water, and due to the ability of the cellulose filler to form a rigid three-dimensional network. The evolution of T-g as a function of relative humidity level and filler load is studied in detail. A decrease in crystallinity of the amylopectin phase is observed at high filler loads, due to the resistance to chain rearrangement imposed by the whiskers. The mechanical strength increased proportionally with filler loads, showing an effective stress transfer from the matrix to the whiskers. An even distribution of whiskers (as determined by SEM) and plasticizer in the matrix contributes to the mechanical performance. The mechanical properties of the nanocomposites showed a strong dependence on relative humidity conditions. (c) 2008 Wiley Periodicals, Inc.