Macromolecular Research, Vol.17, No.3, 149-155, March, 2009
Thermal Decomposition Behavior and Durability Evaluation of Thermotropic Liquid Crystalline Polymers
E-mail:
The thermal decomposition behavior and degradation characteristics of four different thermotropic liquid crystalline polymers (TLCPs) were studied. The thermal decomposition behavior was determined by means of thermogravimetric analysis (TGA) at different heating rates in nitrogen and air. The order of the thermal stability was as follows: multi-aromatic polyester > hydroxybenzoic acid (HBA)/hydroxynaphthoic acid (HNA) copolyester > HNA/hydroxyl acetaniline (HAA)/terephthalic acid (TA) copolyester > HBA/Poly(ethylene terephthalate) (PET) copolyester. The activation energies of the thermal degradation were calculated by four multiple heating rate methods: Flynn-Wall, Friedman, Kissinger, and Kim-Park. The Flynn-Wall and Kim-Park methods were the most suitable methods to calculate the activation energy. Samples were exposed to an accelerated degradation test (ADT), under fixed conditions of heat (63±3 ℃), humidity (30±4%) and Xenon arc radiation (1.10 W/m2), and the changes in surface morphology and color difference with time were determined. The TLCPs decomposed, discolored and cracked upon exposure to ultraviolet radiation.
Keywords:thermotropic liquid crystal polymer (TLCP);thermal decomposition;thermogravimetric analysis (TGA);durability;degradation
- Dutta D, Fruitwala A, Kohli A, Weiss RA, Polym. Eng. Sci., 30, 1005 (1990)
- Kim SH, Kang SW, Fibers and Polymers, 1, 83 (2000)
- Kiss G, Polym. Eng. Sci., 27, 410 (987)
- Kim JY, Kang SW, Kim SH, Kim BC, Shim KB, Lee JG, Macromol. Res., 13(1), 19 (2005)
- Chung TS, Calundann GW, East AJ, Encyclopedia of Engineering Materials, 2, 625 (1987)
- Kim JY, Seo ES, Kim SH, Kikutani T, Macromol. Res., 11(1), 62 (2003)
- Das T, Banthia AK, Adhikari B, Jeong H, Ha CS, Alam S, Macromol. Res., 14(3), 261 (2006)
- Im CG, Kim JY, Kim SH, Polym.(Korea), 29(5), 508 (2005)
- Pandey JK, Reddy KR, Kumar AP, Singh RP, Polym. Degrad. Stabil., 29, 508 (2005)
- Newton D, Bromley R, Practical reliability engineering, John Wiley & Sons Ltd., Chichester (2002)
- Li XG, Huang MR, Polym. Int., 46, 289 (1998)
- Li XG, J. Appl. Polym. Sci., 74(8), 2016 (1999)
- Petrovic ZS, Zavargo ZZ, J. Appl. Polym. Sci., 32, 4353 (1986)
- Yang KK, Wang XL, Wang YZ, Wu B, Jin YD, Yang B, Eur. Polym. J., 39, 1567 (2003)
- Flynn JH, Wall LA, Polym. Lett., 4, 323 (1966)
- Friedman HL, J. Polym. Sci. Part C, 6, 183 (1964)
- Kissinger HE, Anal. Chem., 29, 1702 (1957)
- Kim SD, Park JK, Thermochim. Acta, 264, 137 (1995)
- Alvarez VA, Ruseckaite RA, Vazquez A, J. Appl. Polym. Sci., 90(11), 3157 (2003)
- Jin X, Chung TS, J. Appl. Polym. Sci., 73, 195 (1999)
- Song JO, Jeon MY, Kim CK, Macromol. Res., 15(7), 640 (2007)