화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Polymer(Korea), Vol.42, No.2, 167-174, March, 2018
DOI10.7317/pk.2018.42.2.167  Export Citation
다양한 냉각속도와 변형률속도에서 폴리프로필렌의 압력-부피-온도 특성에 관한 연구
Study on the Pressure-Volume-Temperature Properties of Polypropylene at Various Cooling and Shear Rates
Pengcheng Xie1, Huaguang Yang1, Tianze Cai1, Zheng Li1, Yuelin Li1, and Weimin Yang1, 2, †
  • 1College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology, Beijing, PRC, China
  • 2State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing, PRC, China
E-mail:
To understand the pressure-volume-temperature (PVT) properties of polymer in injection process, a dilatometer with high cooling rate (up to 25 °C/s) and shear rate (up to 320 s-1) was developed. The working pressure and temperature of the dilatometer range from 0 to 100 MPa, and from 30 to 300 °C, respectively. With this instrument, a crystalline polymer polypropylene (PP) was employed to study the effects of cooling rate, shear rate, pressure and their coupling effect on its PVT properties. It was demonstrated that the cooling rate showed a significant effect on the PVT properties. With the increase of cooling rate, the transition temperature of PP from melt state to crystallization decreases gradually and the temperature range of crystallization was also extended. Shear increased the transition temperature of PP from melt state to crystallization. Meanwhile, the initial temperature of shear and crystalline segment was shifted to a higher temperature region with increasing shear duration or shear rate. Above the transition temperature, the effect of shear on the PVT properties weakened gradually with increasing the initial temperature. The coupling analysis of cooling and shear processes showed that increase in cooling rate was enhanced the effect of shear on the transition temperature of PP from melt state to crystallization.
Keywords:pressure-volume-temperature properties;cooling rate;shear rate;crystallization
  1. Park SJ, Char KH, Kang EA, Kim CK, Polym. Korea, 20(2), 305 (1996)
  2. Wootthikanokkhan J, Cheachun T, Sombatsompop N, Thumsorn S, Kaabbuathong N, Wongta N, Wong-On J, Na Ayutthaya SI, Kositchaiyong A, J. Appl. Polym. Sci., 129, 661 (2013)
  3. Jin J, Ok J, Kim SS, Song K, Polym. Korea, 22(6), 1027 (1998)
  4. Kim SG, Li MJ, Ramesan MT, Lee DS, Polym. Korea, 29(2), 140 (2005)
  5. Chakravorty S, Polym. Test, 21, 313 (2002)
  6. Imamura S, Mori Y, Kaneta T, Kushima K, KobunshiRonbunshu, 53, 693 (1996)
  7. Luye JF, Regnier G, Le Bot P, Delaunay D, Fulchiron R, J. Appl. Polym. Sci., 79(2), 302 (2001)
  8. Zuidema H, Peters GWM, Meijer HEH, J. Appl. Polym. Sci., 82(5), 1170 (2001)
  9. Fritzsche AK, Price FP, Polym. Eng. Sci., 14, 401 (1974)
  10. Watanabe K, Suzuki T, Masubuchi Y, Taniguchi T, Takimoto J, Koyama K, Polymer, 44(19), 5843 (2003)
  11. van der Beek MHE, Peters GWM, Meijer HEH, Int. Polym. Process., 20(2), 111 (2005)
  12. Forstner R, Peters GWM, Meijer HEH, Int. Polym. Process., 24(2), 114 (2009)
  13. Xie PC, Chinese Patent CN202916154U (2013).
  14. Pantani R, Coccorullo I, Speranza V, Titomanlio G, Prog. Polym. Sci, 30, 1185 (2005)