A reagent-based treatment method was developed for the removal of sodium dodecyl sulfate (SDS) from aqueous dispersions of single-wall carbon nanotubes (SWCNTs). Based on a survey of various reagents, organic solvents emerged as the most effective at interrupting the SDS:SWCNT interaction without producing deleterious side reactions or causing precipitation of the surfactant. Specifically, treatment with acetone or acetonitrile allows for the facile isolation of SWCNTs with near complete removal of SDS through vacuum filtration, resulting in a 100x reduction in processing time. These findings were validated via quantitative analysis using thermogravimetric analysis, Raman spectroscopy, 4-point probe electrical measurement, and X-ray photoelectron spectroscopy. Subsequent thermal oxidation further enhances the purity of the reagent treated samples and yields bulk SWCNT samples with > 95% carbonaceous purity. The proposed reagent treatment method thus demonstrates potential for large volume SWCNT processing. (C) 2017 Elsevier Inc. All rights reserved.