화학공학소재연구정보센터
Korean Journal of Chemical Engineering, Vol.33, No.2, 603-609, February, 2016
Synergetic effect of biomass mixture on pyrolysis kinetics and biocrude-oil characteristics
E-mail:
Biocrude-oil characteristics were investigated from fast pyrolysis of a mixture of Douglas fir and coffee ground. The mixture was prepared on a 1 : 1 weight basis and pyrolyzed in a bubbling fluidized bed reactor. Characteristics of biocrude-oil were compared at various reaction temperatures ranging from 673-873K. The mixture resulted in a more improved quality biocrude-oil than each biomass feedstock at the reaction temperature of 823 K with significantly low atomic ratio of 0.43 O/C. The kinetic parameters for biomass decomposition were investigated through Friedman, KAS, FWO and CC isoconversional models. In mixture pyrolytic conversion range of 0.1-0.8, the average activation energy was found to be 135 kJ/mol. The results showed that pyrolysis of coffee ground with Douglas fir has more synergetic effect than individual biomass, which leads to a potentially higher quality fuel with lower activation energy to that of biomass.
  1. Salehi E, Abedi J, Harding T, Energy Fuels, 23(7), 3767 (2009)
  2. ICO, Coffee consumption in East and Southeast Asia: 1990-2012. London: ICC 112-4[ICO Document], International Coffee Organization 2014.
  3. Oh SY, Hwang HW, Choi HS, Choi JW, Fuel, 153, 535 (2015)
  4. Lu Q, Yang XL, Zhu XF, J. Anal. Appl. Pyrolysis, 82, 191 (2008)
  5. Nanda S, Mohanty P, Kozinski JA, Dalai AK, Eng. Environ. Res., 4(3), 21 (2014)
  6. Bok JP, Choi YS, Choi SK, Jeong YW, Renew. Energy, 65, 7 (2014)
  7. Choi YS, Choi SK, Jeong YW, Environ. Prog. Sust. Ene. J., 33(4), 1405 (2014)
  8. Abnisa F, Arami-Niya A, Daud WMAW, Sahu JN, Bioenergy Res., 6, 830 (2013)
  9. Bok JP, Choi HS, Choi YS, Park HC, Kim SJ, Energy, 47(1), 17 (2012)
  10. Wang C, Du Z, Pan J, Li J, Yang Z, J. Anal. Appl. Pyrolysis, 78, 438 (2007)
  11. Onal E, Uzun BB, Putun AE, Energy Conv. Manag., 78, 704 (2014)
  12. Martinez JD, Veses A, Mastral AM, Murillo R, Navarro MV, Puy N, Artigues A, Bartroli J, Garcia T, Fuel Process. Technol., 119, 263 (2014)
  13. Li X, Strezov V, Kan T, J. Anal. Appl. Pyrolysis, 110, 79 (2014)
  14. Kim KJ, Park SK, Korean J. Food Sci. Technol., 28(2), 153 (2006)
  15. Soysa R, Choi SK, Jeong YW, Kim SJ, Choi YS, J. Anal. Appl. Pyrolysis, 115, 51 (2015)
  16. Choi HS, Choi YS, Park HC, Korean J. Chem. Eng., 27(4), 1164 (2010)
  17. White JE, Catallo WJ, Legendre BL, J. Anal. Appl. Pyrolysis, 91, 1 (2011)
  18. Friedman HL, J. Polym. Sci. C: Polym. Lett., 6, 183 (1964)
  19. Guerrero MRB, Paula MMD, Zaragoza MM, Gutierrez JS, Velderrain VG, Ortiz AL, Collins-Martinez V, Int. J. Hydrog. Energy, 39(29), 16619 (2014)
  20. Park YH, Kim J, Kim SS, Park YK, Bioresour. Technol., 100(1), 400 (2009)
  21. Othman MR, Park YH, Ngo TA, Kim SS, Kim J, Lee KS, Korean J. Chem. Eng., 27(1), 163 (2010)
  22. Sait HH, Hussain A, Salema AA, Ani FN, Bioresour. Technol., 118, 382 (2012)
  23. Reina J, Velo E, Puigjaner L, Ind. Eng. Chem. Res., 37(11), 4290 (1998)
  24. Vamvuka D, Kakaras E, Kastanaki E, Grammelis P, Fuel, 82(15-17), 1949 (2003)
  25. Jeguirim M, Limousy L, Dutournie P, Chem. Eng. Res. Des., 92(10), 1876 (2014)