| 1373 - 1377 |
Effect of solvent induced cyanoethyl group on dye hydroxylation of uptake of cotton fabrics
Subha AS, Thambidurai S |
| 1378 - 1384 |
Synthesis and characterization of styrene/maleimide copolymer with 4-[N-ethyl-N-(2-hydroxyethyl)amino]-4'-nitroazobenzene as side chain
Pu HT, Liu L, Jiang WC, Li XW, Chen JP |
| 1385 - 1392 |
ESR study of silica-filled SBR with different rubber/filler interactions
Ito M, Isago H, Suzuki N |
| 1393 - 1401 |
Rare earth compounds modified carbon black filled powdered natural rubber: Preparation, morphology and properties
Lin YL, Zhang AQ, Wang LS |
| 1402 - 1406 |
Fibroin membrane preparation and stabilization by polyethylene glycol diglycidyl ether
Moonsri P, Watanesk R, Watanesk S, Niamsup H, Deming RL |
| 1407 - 1413 |
Solubility and diffusivity measurements in nitrogen-poly(vinyl acetate) and nitrogen-toluene-poly (vinyl acetate) systems with the differential pressure decay technique
Pourdarvish R, Danner RP, Duda JL |
| 1414 - 1420 |
Effect of the epoxy resin chemistry on the viscoelasticity of its cured product
Nakka JS, Jansen KMB, Ernst LJ, Jager WF |
| 1421 - 1425 |
The influence of the different modifying agents on the synthesis of poly(methylmethacrylate)-calcium carbonate nanocomposites via soapless emulsion polymerization
Ma XK, Liu YH, Yu Y, Lei H, Lv XT, Zhao LN, Ren SX, Wang ZC |
| 1426 - 1436 |
Improvement of the surface properties of polycarbonate by organic-inorganic hybrid coatings
Fabbri P, Leonelli C, Messori M, Pilati F, Toselli M, Veronesi P, Morlat-Therias S, Rivaton A, Gardette JL |
| 1437 - 1446 |
Synthesis and characterization of processable polyaniline doped with novel dopant NaSIPA
Saini P, Jalan R, Dhawan SK |
| 1447 - 1454 |
Poly(epsilon-caprolactone) grafted dextran biodegradable electrospun matrix: A novel scaffold for tissue engineering
Bajgai MP, Aryal S, Bhattarai SR, Bahadur KCR, Kim KW, Kim HY |
| 1455 - 1461 |
Crystallization-induced shrinkage, crystalline, and thermomechanical properties of in situ polymerized cyclic butylene terephthalate
Harsch M, Karger-Kocsis J, Apostolov AA |
| 1462 - 1472 |
Polymer nanocomposites containing carbon nanotubes and miscible polymer blends based on poly[ethylene-co-(acrylic acid)]
Antolin-Ceron VH, Gomez-Salazar S, Soto V, Avalos-Borja M, Nuno-Donlucas SM |
| 1473 - 1481 |
Micro and nano fibrils from polypropylene/nylon 6 blends
Fallahi E, Barmar M, Kish MH |
| 1482 - 1489 |
Poly(ethylene terephthalate)/expanded graphite conductive composites: Structure, properties, and transport behavior
Zhang M, Li DJ, Wu DF, Yan CH, Lu P, Qiu GM |
| 1490 - 1495 |
The preparation and electrical conductivity of polyacrylamide/graphite conducting hydrogel
Tang QW, Lin JM, Wu JH |
| 1496 - 1500 |
The use of lignosulfonic acid in the synthesis of water-dispersible polyaniline
Taylor KK, Cole CV, Soora R, Dilday JC, Hill AM, Berry B, Viswanathan T |
| 1501 - 1505 |
Rheology of a low-filled polyamide 6/montmorillonite nanocomposite
Xu GY, Chen GM, Ma YM, Ke YC, Han MF |
| 1506 - 1513 |
Linear viscoelastic properties and crystallization behavior of multi-walled carbon nanotube/polypropylene composites
Wu DF, Sun YR, Wu L, Zhang M |
| 1514 - 1522 |
Polymerization of methyl methacrylate with nickel (II)alpha-benzoinoxime complex
Harrar-Ferfera H, Amrani F |
| 1523 - 1530 |
Homopolymer and copolymers of 4-cyanophenyl acrylate with glycidyl methacrylate: Synthesis, characterization, thermal properties, and determination of monomer reactivity ratios
Vijayanand PS, Kato S, Satokawa S, Kojima T |
| 1531 - 1537 |
Effects of crosslinking agents and inert diluents on the characteristics of crosslinked polystyrene copolymers
Tank R, Beldar A, Saxena A, Gupta DC |
| 1538 - 1544 |
Novel poly(methyl methacrylate)-block-polyurethaneblock-poly(methyl methacrylate) tri-block copolymers through atom transfer radical polymerization
Tharanikkarasu K, Verma H, Jang W, Lee SK, Seo J, Baek S, Han H |
| 1545 - 1549 |
Polymerization of methyl acrylate in the presence of ultrasound and peroxodisulfate
Rajan MAJ, Mathavan T, Vivekanandam TS, Umapathy S |
| 1550 - 1556 |
Spray-dried microspheres as a route to clay/polymer nanocomposites
Yun SI, Attard D, Lo V, Davis J, Li H, Latella B, Tsvetkov F, Noorman H, Moricca S, Knott R, Hanley H, Morcom M, Simon GP, Gadd GE |
| 1557 - 1561 |
The influence of acrylic acid groups on the microstructure of HDPE/BT system studied by positron annihilation
Wang HM, Chen Z, Fang PF, Wang SJ, Xu YZ, Fang ZP |
| 1562 - 1565 |
Copolymerization of tetracyclododecene or norbornene with styrene in the presence of Ni(II) complex/MAO catalytic system: First example for transition metal catalyzed copolymerization of tetracyclododecene with styrene
Ogata K, Nishimura N, Yunokuchi T, Toyota A |
| 1566 - 1573 |
Deacetylation of konjac glucomannan by mechanochemical treatment
Pan ZD, He K, Wang YM |
| 1574 - 1581 |
Strain rate effect on crystallinity variations in the double yield region of polyethylene
Manzur A |
| 1582 - 1590 |
Flame retardant finishing of cotton fleece fabric. II. Inorganic phosphorus-containing compounds
Wu XL, Yang CQ |
| 1591 - 1595 |
Nondegradative microextrusion of resorbable polyesters for pharmaceutical and biomedical applications: The cases of poly-lactic-acid and poly-caprolactone
Perale G, Pertici G, Giordano C, Daniele F, Masi M, Maccagnan S |
| 1596 - 1602 |
Biocomposites composed of epoxidized soybean oil cured with terpene-based acid anhydride and cellulose fibers
Takahashi T, Hirayarna KI, Teramoto N, Shibata M |
| 1603 - 1616 |
New generation layered nanocomposites derived from ethylene-co-vinyl acetate and naturally occurring graphite
George JJ, Dyopadhyay AB, Bhowmick AK |
| 1617 - 1628 |
Nonfouling biomaterials based on polyethylene oxide-containing amphiphilic triblock copolymers as surface modifying additives: Synthesis and characterization of copolymers and surface properties of copolymer-polyurethane blends
Tan J, Brash JL |
| 1629 - 1635 |
Thermally and mechanically enhanced epoxy resin-silica hybrid materials containing primary amine-modified silica nanoparticles
Chang KC, Lin CY, Lin HF, Chiou SC, Huang WC, Yeh JM, Yang JC |
| 1636 - 1645 |
Development of new heterobicationic monomethine dyes as effective photoinitiator of free radical polymerization in visible-light region
Kabatc J, Kaczorowska M, Jedrzejewska B, Paczkowski J |
| 1646 - 1656 |
Effects of carbon fillers on the rheology of highly filled liquid-crystal polymer based resins
King JA, Tambling TM, Morrison FA, Keith JM, Cole AJ, Pagel RM |
| 1657 - 1666 |
Synergistic effects of carbon fillers on tensile and flexural properties in liquid-crystal polymer based resins
King JA, Keith JM, Glenn OL, Miskioglu I, Cole AJ, McLaughlin SR, Pagel RM |
| 1667 - 1674 |
Polymerization of acrylonitrile initiated by cerium (IV)-oxalic acid redox system: A kinetic study
Demappa T, Mahadevaiah |
| 1675 - 1679 |
Preparation and tribological properties of poly(methyl methacrylate)/styrene/MWNTs copolymer nanocomposites
Dong B, Wang C, He BL, Li HL |
| 1680 - 1688 |
Synthesis and characterization of poly(acryloxyethyl-trimethylammonium chloride-co-2-hydroxyethyl methacrylate): A study of its interaction with sodium alginate
Valdes O, Monett D, Aguero L, Zaldivar D, Alexandrova L, Katime I |
| 1689 - 1695 |
Biodegradable polyetheresteramides synthesized from epsilon-caprolactone, 6-aminocaproic acid, and poly(ethylene glycol)
He Y, Liu XB, Luo DW, Chen WJ |
| 1696 - 1705 |
Experimental investigation and numerical simulation of the heating/cooling process in rotational molding enhanced with fins
Liu SJ, Fu KH |
| 1706 - 1715 |
Uses of electron-beam irradiation to prepare pH- and temperature-sensitive hydrogels from reactive poly(vinyl alcohol) grafts
Atta AM, Elsayed AM, Shafy HI |
| 1716 - 1721 |
Thermal properties of polytetrafluoroethylene/Sr2Ce2Ti5O16 polymer/ceramic composites
Subodh G, Manjusha MV, Philip J, Sebastian MT |
| 1722 - 1736 |
Hysteresis temperature dependence in filled rubbers. II. Mechanical mixing, filler microdispersion, and polymer-filler interactions
Scurati A, Hergenrother WL, Lin CJ |
| 1737 - 1743 |
Styrene-assisted melt free-radical grafting of pentaerythritol triacrylate onto polypropylene and its crystallization behavior
Wang D, Xie XM, Jow J, Chen HY, Lai SY |
| 1744 - 1754 |
The linear viscoelastic behaviors of nylon1212 blends toughened with elastomer
Wang WJ, Shangguan YG, Zhao L, Yu J, He L, Tan H, Zheng Q |
| 1755 - 1760 |
Facile size-controllable syntheses of highly monodisperse polystyrene nano- and microspheres by polyvinylpyrrolidone-mediated emulsifier-free emulsion polymerization
Du X, He JH |
| 1761 - 1769 |
Evaluation of solubility parameters for nonvolatile branched hydrocarbons by inverse gas chromatography
Sreekanth TVM, Reddy KS |
| 1770 - 1777 |
Effects of fumed silica on the crystallization behavior and thermal properties of poly(hydroxybutyrate-co-hydroxyvalerate)
Ma PM, Wang RY, Wang SF, Zhang Y, Zhang YX, Hristova D |
| 1778 - 1782 |
Synthesis of fluorine-containing acrylate copolymer and application as resins on dyed polyester microfiber fabric
Xie KL, Hou AQ, Shi YQ |
| 1783 - 1791 |
Sulfonated poly(ether imide) and poly(ether sulfone) blends for direct methanol fuel cells. II. Membrane preparation and performance
Shu YC, Chuang FS, Tsen WC, Chow JD, Gong C, Wen S |
| 1792 - 1796 |
Effect of comonomer type and concentration on the equilibrium swelling and volume phase transition temperature of N-isopropylacrylamide-based hydrogels
Cortes JA, Mendizabal E, Katime I |
| 1797 - 1809 |
Hide tanning with modified natural tannins
Tambi L, Frediani P, Frediani M, Rosi L, Camaiti M |
| 1810 - 1817 |
Effect of foam density on the properties of water blown rigid polyurethane foam
Thirumal M, Khastgir D, Singha NK, Manjunath BS, Naik YP |
| 1818 - 1828 |
New poly(phenylene oxide)/polystyrene blend nanocomposites with clay: Intercalation, thermal and mechanical properties
Tiwari RR, Khilar KC, Natarajan U |
| 1829 - 1836 |
Investigation on the crystallization behavior of poly(ether ether ketone)/poly(phenylene sulfide) blends
Zhang RC, Xu Y, Lu ZY, Min M, Gao Y, Huang YG, Lu A |
| 1837 - 1844 |
Synthesis and cure kinetics of liquefied wood/phenol/formaldehyde resins
Pan H, Shupe TF, Hse CY |
| 1845 - 1851 |
Enhancement of thermal stability associated with the chemical treatment of bacterial (Gluconacetobacter xylinus) cellulose
George J, Sajeevkumar VA, Kumar R, Ramana KV, Sabapathy SN, Bawa AS |
| 1852 - 1856 |
Structure and surface elemental state analysis of polyimide resin film after carbonization and graphitization
Zhao S, Shi ZQ, Wang CY, Chen MM |
| 1857 - 1864 |
Real-time morphological observation of isotactic polypropylene and poly(ethylene-co-octene) rubber blend during temperature change
Ono M, Nakajima K, Misawa M, Nishi T |
| 1865 - 1870 |
Solubility of carbon dioxide and cosolvents in a photoresist polymer
Balashova IM, Russell MC, Danner RP, Duda JL |
| 1871 - 1879 |
Effect of addition of surfactants on the rheology of gels from methylcellulose in N,N-dimethylformamide
Kundu PP, Singh RP |
| 1880 - 1886 |
Anionic polymerization and properties of graft copolymers consisting of alternating styrene/maleimide copolymer main chains and polyamide 6 grafts
Xu W, Liu YC, Xiong YQ, Miao YR, Xu WJ |
| 1887 - 1892 |
Surface modification of carbon fiber by redox-induced graft polymerization of acrylic acid
Xu ZW, Wu XQ, Sun Y, Jiao Y, Li JL, Chen L, Lu LS |
| 1893 - 1900 |
Crystallization behavior of a thermoplastic polyimide derived from 3,3',4,4'-oxydiphthalic dianhydride and 4,4'-oxydianiline
Zhao GY, Zhang M, Men YF, Ding MX, Jiang W |
| 1901 - 1907 |
Synthesis of polysiloxane-polyester copolymer by lipase-catalyzed polycondensation
Guo L, Zhang ZJ, Zhu YP, Li JP, Xie ZM |
| 1908 - 1916 |
Intercalated clays from pentaerythritol stearate for use in polymer nanocomposites
Bartels J, Beall GW, Grah M, Jin K, Speer D, Yarbrough J |
| 1917 - 1923 |
An antimicrobial cationic reactive dye: Synthesis and applications on cellulosic fibers
Zhao T, Sun G, Song XY |
| 1924 - 1933 |
Electrodeposition of high quality and freestanding poly(9,9-dioctylfluorene-co-thiophene) films with good fluorescence properties
Wang XC, Chen B, Xu JK, Zhou WQ, Pu SZ |
| 1934 - 1941 |
Viscoelastic properties of polyarylene ether nitriles/thermotropic liquid crystalline polymer blend
Wu DF, Zhang YS, Wu LF, Jin LF, Zhang M, Zhou WD, Yan CH |
| 1942 - 1948 |
Effect of structure on mechanical properties of vinyl ester resins and their glass fiber-reinforced composites
Agarwal N, Singh A, Varma IK, Choudhary V |
| 1949 - 1957 |
The first study of the effect of surfmer backbone structure on the stability and the course of emulsion polymerization of methyl methacrylate and butyl acrylate monomers
Shaffei KA |
| 1958 - 1968 |
Adsorption of silane onto cellulose fibers. II. The effect of pH on silane hydrolysis, condensation, and adsorption behavior
Bel-Hassen R, Boufi S, Salon MCB, Abdelmouleh M, Belgacem MN |
| 1969 - 1975 |
Control of vulcanizing/devulcanizing behavior of diphenyl disulfide with microwaves as the heating source
Vega B, Montero L, Lincoln S, Agullo N, Borros S |
| 1976 - 1985 |
Investigation of the surface properties of polymeric soaps obtained by ring-opening polymerization of epoxidized soybean oil
Biresaw G, Liu ZS, Erhan SZ |
| 1986 - 1994 |
Preparation and morphological evolution of heterophasic PP-EP/EVA/organoclay nanocomposites: Effect of the nanoclay organic modifier
Valera-Zaragoza M, Ramirez-Vargas E, Medellin-Rodriguez FJ |
| 1995 - 2000 |
Synthesis, characterization, and photophysics of a novel conjugated polymer with 1,3,4-oxadiazole, carbazole, and naphthalene units
Feng LH, Wang XJ, Chen ZB |
| 2001 - 2009 |
Synthesis and characterization of epoxy/amine terminated amide-imide-imide blends
Bhuvana S, Sarojadevi M |
| 2010 - 2016 |
Preparation of organic/inorganic hybrid nanomaterials using aggregates of star block copolymer consisting of poly(stearyl methacrylate) and poly(3-(trimethoxysilyl) propyl methacrylate) as precursor
Zhou JF, Wang L, Dong XC, Yang Q, Deng L, Huo J, Tan QH, Liu QQ |
| 2017 - 2022 |
Effect of the nature of crosslinking agent on the unusual metal ion specificity and selectivity of N,N-bis(2-aminoethyl)polyacrylamide
Bindu M, Mathew B |
| 2023 - 2028 |
Mechanical and surface properties of polyurethane/fluorinated multi-walled carbon nanotubes composites
Deng JN, Cao J, Li JH, Tan H, Zhang Q, Fu Q |
| 2029 - 2036 |
Synthesis of polyurethane resins and its improvement on dimensional stability and finishing performances of medium- and small-diameter softwoods
Lu KT, Lin SL |
| 2037 - 2044 |
Effects of ultraviolet irradiation treatment on the surface properties and adhesion of moso bamboo (Phyllostachys pubescens)
Lu KT, Fan SY |
| 2045 - 2051 |
Dynamic mechanical analysis of urea-formaldehyde resin adhesives with different formaldehyde-to-urea molar ratios
Park BD, Kim JW |
| 2052 - 2059 |
A simple imide compound as a curing agent for epoxy resin. I. Synthesis and properties
Wu WL, Hsu KC, Cheng WH |
