| 853 - 866 |
Ozonolysis of model olefins - Efficiency of antiozonants
Huntink NM, Datta RN, Talma A, Noordermeer JWM |
| 867 - 878 |
Effects of reactive low-profile of cured unsaturated polyester additives on the properties resins. II. Glass-transition temperature and mechanical properties
Dong JP, Lee JH, Lai DH, Huang YJ |
| 879 - 885 |
Block copolymer of trans-polyisoprene and urethane segment: Shape memory effects
Ni XY, Sun XH |
| 886 - 891 |
An amphoteric water-soluble copolymer. II. Effect of its molecular weight on the dispersion of barium titanate in water
Ying KL, Hsu KC, Wei WCJ |
| 892 - 899 |
Kneading and molding of ceramic microparts by precision powder injection molding (PIM)
Yang SY, Huang CK, Lin BC, Wei WCJ |
| 900 - 910 |
Relative strength of H-bonding groups on biodegradable polymer-based blends in solution
Soria V, Gomez CM, Falo M, Abad C, Campos A |
| 911 - 917 |
Study of the flexural modulus of natural fiber/polypropylene composites by injection molding
Shibata S, Cao Y, Fukumoto I |
| 918 - 922 |
Synthesis and characterization of suspension terpolymer of N-cyclohexylmaleimide, methyl methacrylate, and styrene
Yang LT, Sun DH |
| 923 - 927 |
Synthesis and characterization of photolumine scent conjugated polymer containing N-(alpha-naphthyl)-carbazole unit
Feng LH, Zhang CH, Chen ZB, Qin AJ, Yuan MS, Bai FL |
| 928 - 936 |
Synthesis and characterization of antibacterial polychelates of urea-formaldehyde resin with Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), and Zn(II) metal ions
Nishat N, Ahmad S, Rahisuddin, Ahamad T |
| 937 - 945 |
NMR imaging and differential scanning calorimetry study on drying of pine, birch, and reed pulps and their mixtures
Heikkinen S, Alvila L, Pakkanen TT, Saari T, Pakarinen P |
| 946 - 953 |
Chemical synthesis and characterization of polyaniline nanofiber doped with gadolinium chloride
Zhang SL, Kan SQ, Kan JQ |
| 954 - 961 |
Poly(methacrylic acid)-bound dihydroxybenzene units: Redox polymers
Moulay S, Mehdaoui R |
| 962 - 966 |
Non-catalytic anhydride curing of hydrogenated bisphenol-A glycidyl ether with 1,2,4-cyclohexanetricarboxylic anhydride and light emitting diode encapsulation
Morita Y, Sugino H |
| 967 - 979 |
Effects of reactive low-profile additives on the volume shrinkage and internal pigmentability for low-temperature cure of unsaturated polyester
Dong JP, Chiu SG, Hsu MW, Huang YJ |
| 980 - 988 |
Miscibility and crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(vinyl acetate) blends
Chiu HJ |
| 989 - 999 |
Microstructure and mechanical behavior of polyamide 66-precipitated calcium carbonate composites: Influence of the particle surface treatment
Cayer-Barrioz J, Ferry L, Frihi D, Cavalier K, Seguela R, Vigier G |
| 1000 - 1007 |
Solid polymer electrolytes. XI. Preparation, characterization and ionic conductivity of new plasticized polymer electrolytes based on chemical-covalent polyether-siloxane hybrids
Liang WJ, Chen YP, Wu CP, Kuo PL |
| 1008 - 1012 |
Development of acrylonitrile-butadiene (NBR)/polyamide thermoplastic elastomeric compositions: Effect of carboxylation in the NBR phase
Chowdhury R, Banerji MS, Shivakumar K |
| 1013 - 1018 |
Water-assisted formation of honeycomb films of poly(L-lactic-co-glycolic acid)
Tian Y, Ding HY, Shi YQ, Jiao QZ, Wang XL |
| 1019 - 1023 |
Evaluation of blood compatibility of MeO-PEG-poly (D,L-lactic-co-glycolic acid)-PEG-OMe triblock copolymer
Duan YR, Nie Y, Gong T, Wang Q, Zhang ZR |
| 1024 - 1031 |
Extraction of CdS pigment from waste polyethylene
Wanrooij PHP, Agarwal US, Meuldijk J, van Kasteren JMN, Lemstra PJ |
| 1032 - 1038 |
Clay-starch composites and their application in papermaking
Yoon SY, Deng YL |
| 1039 - 1047 |
Influence of the porous morphology on the in vitro degradation and mechanical properties of poly(L-lactide) disks
Sarazin P, Virgilio N, Favis BD |
| 1048 - 1056 |
Ultraviolet radiation curable epoxy resin encapsulant for light emitting diodes
Kumar RN, Keem LY, Mang NC, Abubakar A |
| 1057 - 1066 |
Pore structure of macroporous monolithic cryogels prepared from poly(vinyl alcohol)
Plieva FM, Karlsson M, Aguilar MR, Gomez D, Mikhalovsky S, Galaev IY, Mattiasson B |
| 1067 - 1082 |
High modulus polypropylene fibers. II. Influence of fiber preparation upon structure and morphology
Gregor-Svetec D |
| 1083 - 1092 |
Physical properties of natural rubber/organoclay nanocomposites compatibilized with epoxidized natural rubber
Teh PL, Ishak ZAM, Hashim AS, Karger-Kocsis J, Ishiaku US |
| 1093 - 1102 |
Controlled heterogeneous modification of cellulose fibers with fatty acids: Effect of reaction conditions on the extent of esterification and fiber properties
Freire CSR, Silvestre AJD, Neto CP, Belgacem MN, Gandini A |
| 1103 - 1112 |
The use of H-1 NMR and UV-vis measurements for quantitative determination of trans/cis isomerization of a photo-responsive monomer and its copolymer
Mortiruzzaman M, Talbot JDR, Sabey CJ, Fernando GF |
| 1113 - 1123 |
Preparation and solubility of water-methanol mixtures in sulfortated poly(etherketone) containing a cardo-ring structure
Akiba C, Watanabe K, Nagai K, Hirata Y, Nguyen QT |
| 1124 - 1136 |
Ethylene and 1-hexene sorption in LLDPE under typical gas-phase reactor conditions: Experiments
Novak A, Bobak M, Kosek J, Banaszak BJ, Lo D, Widya T, Ray WH, de Pablo JJ |
| 1137 - 1145 |
New dinitroxide for stable free radical polymerization of styrene
Zhang ZB, Zhu XL, Zhu J, Cheng ZP, Lu JM |
| 1146 - 1161 |
Effect of bisphenol A on the miscibility, phase morphology, and specific interaction in immiscible biodegradable poly(epsilon-caprolactone)/poly(L- lactide) blends
Kuo SW, Huang CF, Tung YC, Chang FC |
| 1162 - 1168 |
Chitosan: Aspects of fiber spinnability
El-Tahlawy K, Hudson SM |
| 1169 - 1175 |
Dyeing properties of Bombyx mori silks grafted with methyl methacrylate and methacrylamide
Prachayawarakorn J, Kryratsamee W |
| 1176 - 1183 |
Fibrillation tendency of cellulosic fibers. VII. Combined effects of treatments with an alkali, crosslinking agent, and reactive dye
Zhang W, Okubayashi S, Badura W, Bechtold T |
| 1184 - 1197 |
Modification of polyolefin films surface with sodium hypochlorite
Iguerb O, Demoustier-Champagne S, Marchand-Brynaert J, Daoust D, Sclavons M, Devaux J |
| 1198 - 1204 |
Improvement of thermal stability of new heteroaromatic poly(azomethine urethane)s
Issam AM, Ismail J |
| 1205 - 1213 |
Miscibility enhancement on the immiscible poly (vinyl pyrrolidone) and poly (ethyl methacrylate) with poly (vinyl phenol)
Hsu WP |
| 1214 - 1221 |
The effect of substitution levels on the luminescent and degradation properties of fluorescent poly(ester-anhydride)s
Fan J, Jiang HL, Chen D, Zhu KJ |
| 1222 - 1228 |
Alanine containing porous beads for mercury removal from artificial solutions
Senel S, Kara A, Karabakan A, Denizli A |
| 1229 - 1238 |
Femtosecond-laser-assisted wet chemical etching of polymer materials
Wochnowski C, Hanada Y, Cheng Y, Metev S, Vollertsen F, Sugioka K, Midorikawa K |
| 1239 - 1246 |
Preparation of poly(lactic acid) fiber by dry-jet-wet-spinning. I. Influence of draw ratio on fiber properties
Gupta B, Revagade N, Anjum N, Atthoff B, Hilborn J |
| 1247 - 1254 |
Synthesis and characterization of poly(butylene terephthalate) nanocomposite fibers: Thermo-mechanical properties and morphology
Chang JH, Mun MK |
| 1255 - 1261 |
Morphology and mechanical properties of blends of linear low density polyethylene and poly(ethenepropene-1-butene)
Quental AC, Felisberti MI |
| 1262 - 1268 |
Characteristics of methacrylic acid-grafted polyethylene films prepared by photografting in the presence of polyfunctional monomers
Kubota H, Kojima M, Kuroda SI |
| 1269 - 1276 |
Effect of temperature on electrical behavior of flyash-filled epoxy gradient composites
Chand N, Jain D |
| 1277 - 1281 |
Characterization of the aging behavior of raw epoxidized natural rubber with a rubber processing analyzer
Wang PY, Qian HL, Yang CL, Ying-Chen |
| 1282 - 1288 |
Influence of poly(ethylene glycol)-containing additives on extrusion of ultrahigh molecular weight polyethylene/polypropylene blend
Xie MJ, Liu XL, Li HL |
| 1289 - 1293 |
Synthesis and magnetic properties of novel complexes of poly(N-2-thiazolylmethacrylamide) with Nd(III), Pr(III), and Sm(III)
Zheng P, Sun WL, Shen ZQ |
| 1294 - 1298 |
Local microstructure characterization of rare earth-doped PMMA with low-ion content by fluorescence EXAFS
Zhao H, Hu J, Zhang QJ, Bao J, Liu WH, Gao C, Lu YH |
| 1299 - 1305 |
Grafting of methyl methacrylate onto Antheraea pernyi silk fiber with the assistance of Supercritical CO2
Peng Q, Xu Q, Sun DF, Sha ZZ |
| 1306 - 1311 |
Evaluation of the microstructure and melting behavior of drawn polypropylene fibers with a microthermal analyzer
Ye JP, Hasegawa T, Suzuki A |
| 1312 - 1317 |
Block copolymerization of poly(diethylene glycol phthalic anhydride) and methyl methacrylate initiated by potassium diperiodatonickelate(IV)
Liu YH, Bai LB, Zhou WQ, Liu YW, Li YX, Deng KL |
| 1318 - 1322 |
Thermogravimetric analysis of agricultural residues: Oxygen effect and environmental impact
Simkovic I, Csomorova K |
| 1323 - 1327 |
Study on in situ synthesis of konjac glucomannan/silver nanocomposites via photochemical reduction
Tian DT, Hu WB, Zheng Z, Liu HB, Xie HQ |
| 1328 - 1334 |
Reactions of copper ions with amines in the presence of self-assembled fluorinated oligomeric aggregates
Sawada H, Furukuwa R, Sasazawa K, Toriba K, Ueno K, Hamazaki K |
| 1335 - 1343 |
Nonisothermal crystallization of poly(ethylene-co-glycidyl methacrylate)/clay nanocomposites
Huang JW, Hung HC, Tseng KS, Kang CC |
| 1344 - 1348 |
Chemical modification of nylon 6 and polyester fabrics by ozone-gas treatment
Lee M, Lee MS, Wakida T, Tokuyama T, Inoue G, Ishida S, Itazu T, Miyaji Y |
| 1349 - 1356 |
Surface modification of monodisperse-crosslinked polymeric microspheres using a redox initiation system
Jung MO, Ryu JH, Park JG, Jun JB, Suh KD |
| 1357 - 1363 |
Morphology and thermal behavior of MCPA6/SAN blends prepared by anionic ring-opening polymerization of epsilon-caprolactam
Hou LL, Yang G |
| 1364 - 1371 |
Properties and preparation of compatibilized nylon 6 nanocomposites/ABS blends using functionlized metallocene polyolefine elastomer. I. Impact properties
Lai SM, Liao YC, Chen TW |
| 1372 - 1377 |
Wrinkle resistant properties and antibacterial efficacy of cotton fabrics treated with glyoxal system and with combination of glyoxal and chitosan system
Kittinaovarat S, Kantuptim P, Singhaboonponp T |
| 1378 - 1384 |
Poly(silyl ester)s: A new route of synthesis via the condensation of Di-tert-butyl ester of dicarboxylic acid with dichlorosilane
Liu ZL, Han NF, Dong JA |
| 1385 - 1394 |
Separation characteristics of acetic acid-water mixtures using poly(vinyl alcohol-g-4-vinyl pyridine) membranes by pervaporation and temperature difference evapomeation techniques
Asman G, Sanli O |
| 1395 - 1402 |
Synthesis of a difunctional organolithium compound as initiator for the polymerization of styrene-butadiene/isoprene-styrene triblock copolymer
Lu ZX, Xu HD, Li Y, Hu YL |
| 1403 - 1405 |
Frequency-dependent conductivity and dielectric permittivity of polyaniline/CeO2 composites
Parvatikar N, Prasad MVNA |
| 1406 - 1412 |
Colloidal aggregation of aminoplastic polycondensation resins: Urea-formaldehyde versus melamine-formaldehyde and melamine-urea-formaldehyde resins
Despres A, Pizzi A |
| 1413 - 1419 |
Optimization of the properties of chitosan lactate/hyaluronan film
Kukolikova L, Bakos D, Alexy P, Hanzelova S, Zhong W |
| 1420 - 1426 |
Methacrylic acid and dodecyl methacrylate (MAc-DMA) hydrogel for enhanced catalytic activity of lipase of Bacillus coagulans MTCC-6375
Kanwar SS, Chauhan GS, Chimni SS, Chauhan S, Rawat GS, Kaushal RK |
| 1427 - 1431 |
Synthesis and characteristics of poly(methyl methacrylate)/expanded graphite nanocomposites
Wang WP, Liu Y, Li XX, You YZ |
| 1432 - 1442 |
Extrusion of feather keratin
Barone JR, Schmidt WF, Gregoire NT |
| 1443 - 1449 |
Hydroxyalkylation of parabanic acid. III. Polymers from parabanic acid and ethylene carbonate
Zarzyka-Niemiec I, Narog D, Lubczak J |
| 1450 - 1456 |
The adsorption of water vapor an super absorbent product at low temperatures and low mass
Bakass M, Bellat JP, Mokhlisse A, Bertrand G |
| 1457 - 1464 |
Acidic hydrolysis of a poly(vinyl acetate) matrix by the catalytic effect of Ag nanoparticles and the micellization of Ag-metal-containing polymer
Huang CJ, Shieu FS, Hsieh WP, Chang TC |
| 1465 - 1470 |
Mineralization of hydroxyapatite on a polymer substrate in a solution supersaturated by polyelectrolyte
Iwatsubo T, Kusumocahyo SP, Kanamori T, Shinbo T |
| 1471 - 1478 |
Preparation of cellulose acetate butyrate and poly(ethylene glycol) copolymer to blend with poly(3-hydroxybutyrate)
Cheng GX, Wang TZ, Zhao Q, Ma XL, Zhang LG |
| 1479 - 1491 |
Nonisothermal crystallization kinetics and morphology of self-seeded syndiotactic 1,2-polybutadiene
Cai JL, Li T, Han Y, Zhuang YQ, Zhang XQ |
| 1492 - 1495 |
A high-resolution solid-state NMR investigation of molecular mobility of poly(methyl methacrylate)/poly(vinyl pyrrol idone)/poly(ethylene oxide) ternary blends
Diniz TMFF, Tavares MIB |
| 1496 - 1505 |
New melamine-formaldehyde-ketone polymers. IV. Dissolution of melamine in reactive solvents prepared from methyl ethyl ketone
Glowacz-Czerwonka D, Kucharski M |
| 1506 - 1510 |
Copolymers of styrene with a quaternary europium complex
Pan YF, Zheng A, Hu FZ, Xiao HN |
| 1511 - 1521 |
Synthesis and characterization of poly(ethylene-co-trimethylene terephthalate)s
Wei GF, Wang LY, Chen GK, Gu LX |
| 1522 - 1530 |
A study of the synthesis, kinetics, and characterization of reactive graft copolymers of poly(vinyl imidazole) and cellulose for use as supports in enzyme immobilization and metal ion uptake
Chauhan GS, Singh B, Chauhan S, Dhiman SK, Kumar D |
| 1531 - 1537 |
Antibacterial property and mechanism of copolymer of acrylamide and quaternary salt of 4-vinyl pyridine
Gao BJ, He SX, Guo JF, Wang RX |
| 1538 - 1546 |
Anionic dye adsorption characteristics of surfactant-modified coir pith, a'waste' lignocellulosic polymer
Namasivayam C, Sureshkumar MV |
| 1547 - 1553 |
Preparation, morphology, and mechanical properties of elastomers based on alpha,omega-dihydroxy-polydimethylsiloxane/poly(methyl methacrylate) blends
Dong J, Liu ZL, Feng YB, Zheng C |
| 1554 - 1560 |
Intermolecular interactions between bovine serum albumin and certain water-soluble polymers at various temperatures
Kavlak S, Guner A |
| 1561 - 1570 |
Characteristics of konjac glucomannan and poly(acrylic acid) blend films for controlled drug release
Yu HQ, Huang A, Xiao CB |
| 1571 - 1576 |
Effect of elastomer type and functionality on the behavior of toughened polyamide nanocomposites
Kelnar I, Kotek J, Kapralkova L, Hromadkova J, Kratochvil J |
| 1577 - 1587 |
Pressure drop estimation for polyamide 6 flow through spinnerets and filters
Gustin A, Zupancic A, Mitsoulis E |
| 1588 - 1593 |
Study of the preparation and properties of UV-blocking fabrics of a PET/TiO2 nanocomposite prepared by in situ polycondensation
Han KQ, Yu MH |
| 1594 - 1600 |
Synthesis and characterization of reinforced acrylic-based superabsorbents crosslinked with divinylbenzene
Huang J, Huang ZM, Bao YZ, Weng ZX |
| 1601 - 1606 |
Photopolymerization of methyl methacrylate by 2,2'-dithiodiethanol: Effect of reaction conditions
Baruah SR, Kakati DK |
| 1607 - 1617 |
Preparation and characterization of EVA-sisal fiber composites
Malunka ME, Luyt AS, Krump H |
| 1618 - 1623 |
Coagulation and sedimentation of bacteria using a highly biodegradable polymeric coagulant
Kawabata N, Fuse T |
| 1624 - 1632 |
The reaction in water of UF resins with isocyanates at short curing times: A C-13 NMR investigation
Wieland S, Pizzi A, Hill S, Grigsby W, Pichelin F |
| 1633 - 1641 |
Poly(epsilon-caprolactone)-grafted acetylated anhydroglucose oligomer by ring-opening polymerization - Synthesis and characterization
Gadda T, Kylma J, Tuominen J, Mikkonen H, Laine A, Peltonen S, Seppala J |
| 1642 - 1650 |
Cure kinetics of aqueous phenol-formaldehyde resins used for oriented strandboard manufacturing: Analytical technique
Lei Y, Wu Q, Lian K |
| 1651 - 1658 |
Comparison of propylene/ethylene copolymers prepared with different catalysts
Stephens CH, Poon BC, Ansems P, Chum SP, Hiltner A, Baer E |
| 1659 - 1663 |
A microindentation study of polyethylene composites produced by hot compaction
Orench IP, Calleja FJB, Hine PJ, Ward IM |
| 1664 - 1667 |
Study on the electrodriven action of gelatin hydrogel in silicone oil
Liu GQ, Zhao XP |
| 1668 - 1672 |
Cationization of cellulose fabrics by polyallylamine binding
Wu M, Kuga SN |
| 1673 - 1680 |
Hydroxymethylation and polycondensation reactions in urea-formaldehyde resin synthesis
Christjanson P, Pehk T, Siimer K |
| 1681 - 1687 |
Ring-opening polymerization of styrene oxide with maghnite-H+ as ecocatalyst
Yahiaoui A, Belbachir M |
| 1688 - 1704 |
Synthetic preparations and physical and electrical properties of main chain type thermotropic liquid crystalline polyimide/SiO2 nanocomposites
Ho CY, Lee JY |
