| 1 - 7 |
Effect of Glutaraldehyde on Electrical Properties of Arrowroot Starch plus NaI Electrolyte System
Tiwari T, Pandey K, Srivastava N, Srivastava PC |
| 8 - 13 |
Effects of TDI and FA-703 on Physico-Mechanical Properties of Polyurethane Dispersion
Negim SM, Bahruddin S, Mahyuddin R, Idiris MS |
| 14 - 20 |
Evaluation of Nonisothermal Crystallization Kinetic Models for Linear Poly(phenylene sulfide)
Liu PQ, Hu A, Wang S, Shi MW, Ye GD, Xu JJ |
| 21 - 26 |
Synthesis of Double Silylene-Bridged Binuclear Metallocenes and Their Cooperation Effect During Ethylene Polymerization and Ethylene/1-Hexene Copolymerization
Mi PK, Xu S, Qu LD, Zhang DS, Chen QA, Wang SH |
| 27 - 36 |
Viscoelastic Properties of Polypropylene/Organo-Clay Nano-Composites Prepared Using Miniature Lab Mixing Extruder from Masterbatch
Ali MA, Elleithy RH |
| 37 - 42 |
Strain-Induced Crystallization Behavior of Polychloroprene Rubber
Zhang P, Huang GS, Qu LL, Nie YJ, Weng GS, Wu JR |
| 43 - 48 |
New Deep Blue Light Emitting Copolymer Containing Fluorene, Carbazole, and Dialkoxynaphthalene
Kang HH, Kang MS, Oh DH, Lee DH, Shin DC, Kwon SK, Kim YH |
| 49 - 58 |
DGEBA-Grafted Polyaniline: Synthesis, Characterization and Thermal Properties
Teh CH, Rasid R, Daik R, Ahmad SHJ |
| 59 - 67 |
Rheology, Crystallization Behaviors, and Thermal Stabilities of Poly(butylene succinate)/Pristine Multiwalled Carbon Nanotube Composites Obtained by Melt Compounding
Wang GL, Guo BH, Xu J, Li R |
| 68 - 77 |
Study on the Flame Retardancy of EVM/Magnesium Hydroxide Composites Optimized with a Flame Retardant Containing Phosphorus and Silicon
Wang LC, Wu XF, Wu C, Yu JH, Wang GL, Jiang PK |
| 78 - 85 |
Investigation of the Degradation Properties of Low Molecular Weight Natural Rubber Blends in Oven, Oxygen, Ozone, Water, and Some Organic Solvents
Akinlabi AK, Okieimen FE |
| 86 - 96 |
Blend Toughening of Poly(vinyl chloride) by Chlorinated Polyethylene/Hydroxy Ethyl Acrylate Graft Copolymer
Du ZA, Xu C, Zhao ZQ, Zhao JR, Feng Y |
| 97 - 101 |
Catalyst-Free Preparation of Polyhedral Oligomeric Silsesquioxanes Containing Organic-Inorganic Hybrid Mesoporous Nanocomposites
Qin YC, Zhu FH, Luo MM, Zhang L |
| 102 - 110 |
Molecular Mobility of Nitroxide Spin Probes in Glassy Polymers: Models of the Complex Motion of Spin Probes
Chernova DA, Vorobiev AK |
| 111 - 126 |
Mechanical Properties of 1,2,4,5-Benzene Tetra Carboxylic Chitosan-Filled Chitosan Biocomposites
Julkapli NM, Ahmad Z, Akil HM |
| 127 - 137 |
Surface Characterization of Quaternized Polysulfone Films and Biocompatibility Studies
Ioan S, Albu RM, Avram E, Stoica I, Ioanid EG |
| 138 - 143 |
Effects of Charge Trapping on the Electrical Conductivity of Low-Density Polyethylene-Carbon Black Composites
Dudic D, Skipina B, Dojcilovic J, Novakovic L, Kostoski D |
| 144 - 153 |
Post-Polymerization Crosslinked Polyurethane Shape Memory Polymers
Hearon K, Gall K, Ware T, Maitland DJ, Bearinger JP, Wilson TS |
| 154 - 160 |
Synthesis and Characterization of PVP/LiCoO2 Nanofibers by Electrospinning Route
Chen LJ, Liao JD, Chuang YJ, Hsu KC, Chiang YF, Fu YS |
| 161 - 168 |
Compatible Polycarbonate/Polyamide 6,6 Blends with Fibrillar Morphology
Granado A, Eguiazabal JI, Nazabal J |
| 169 - 175 |
Copolymerization of Acrylonitrile with N-(Substituted phenyl)itaconimide
Abdel-Naby AS |
| 176 - 185 |
Structure and Thermal Stability of Polysaccharide Fractions Extracted from the Ultrasonic Irradiated and Cold Alkali Pretreated Bamboo
Li MF, Fan YM, Xu F, Sun RC |
| 186 - 195 |
Vibrational Dynamics and Heat Capacity of Polychloroprene
Gupta A, Agarwal P, Choudhary N, Tandon P, Gupta VD |
| 196 - 201 |
Performance Evaluation of Ultra-Rapid-Hardening Roller-Compacted Concrete with Styrene Butadiene Latex
Won JP, Kim JM, Lee SJ, Lee SW, Park SK |
| 202 - 209 |
Examining the Effect of Mercerization Process Applied Under Different Conditions via the Degree of Whiteness and Color Efficiency
Gemci R, Cebicci C |
| 210 - 216 |
Grafting of Telechelic Poly(lactic-co-glycolic acid) onto O-2 Plasma-Treated Polypropylene Flakes
Ren J, Hua XQ, Zhang TZ, Zhang ZG, Ji ZL, Gu N |
| 217 - 225 |
Hyperbranched Polymer Based on Triphenylamine and Pyridine: Fluorescent Chemosensors for Palladium Ions
Feng JC, Zhang C, Li Y, Yang MJ |
| 226 - 233 |
Synergistic Effect on Crystalline Structure of Polyvinylidene Fluoride Nanocomposites with Multiwalled Carbon Nanotube Loading by a Twin Screw Extruder
Kang DJ, Pal K, Bang DS, Kim JK |
| 234 - 242 |
Sorption of Textile Dye from Aqueous Solution by Macroporous Amino-Functionalized Copolymer
Sandic ZP, Nastasovic AB, Jovic-Jovicic NP, Milutinovic-Nikolic AD, Jovanovic DM |
| 243 - 252 |
Luminescent Properties of Long-Lasting BaAlxOy:Eu2+,Dy3+ Nanocomposites
Bem DB, Swart HC, Luyt AS, Dejene FB |
| 253 - 261 |
Effect of Chemical Structure of Thermoplastics on Antibacterial Activity and Physical Diffusion of Triclosan Doped in Vinyl Thermoplastics and Their Composites with CaCO3
Silapasorn K, Sombatsompop K, Kositchaiyong A, Wimolmala E, Markpin T, Sombatsompop N |
| 262 - 266 |
Studies on Fourier Transform Infrared Spectroscopy, Scanning Electron Microscope, and Direct Current Conductivity of Polyaniline Doped Zinc Ferrite
Patil R, Roy AS, Anilkumar KR, Ekhelikar S |
| 267 - 278 |
Effect of Titanium Dioxide on the Flame-Retardant Finishing of Cotton Fabric
Lam YL, Kan CW, Yuen CWM |
| 279 - 285 |
Effect of Methacrylic Acid on the Properties of Ethylene-Vinylene Acetate Rubber Vulcanizates Reinforced by Magnesium Hydroxide
Yu HY, Zhang Y, Ren WT, Chen SG, Hoch M, Guo SR |
| 286 - 291 |
Diethanol Amine-Functionalized Polymer-Supported Palladium (0) Complex as Catalyst for Suzuki Cross-Coupling Reaction in Water
He Y, Wang LA, Cai C |
| 292 - 298 |
Selective Recognition of Chloroacetic Acids by Imprinted Polyaniline Film
Najafi M, Mollazadeh M |
| 299 - 308 |
Preparation and Properties of Novel Thermally Stable Pyridine-Based Poly(amide imide amide)s
Mehdipour-Ataei S, Taremi F |
| 309 - 320 |
Employing of Some Hyperbranched Polyesteramides as New Polymeric Admixtures for Cement
Amin A, Darweesh HHM, Ramadan AM, Morsi SMM, Ayoub MMH |
| 321 - 326 |
Immobilization of Microorganisms Within Porous Polymeric Capsules
Nagashima R, Hirose H, Matsuyama H |
| 327 - 335 |
Investigation of Electrospun and Film-Cast PVC Membranes Incorporated with Aliquat 336 for Efficient Cd Extraction: A Comparative Study
Wong L, Shen W, Truong YB |
| 336 - 341 |
Preparation of Mesophase Pitch-Based Carbon Foams with Supercritical Toluene
Lu YG, Li ZQ, Wang P, Yang CL |
| 342 - 351 |
Thermo-Responsive Albumin Hydrogels with LCST Near the Physiological Temperature
Spizzirri UG, Cirillo G, Iemma F, Puoci F, Curcio M, Parisi OI, Picci N |
| 352 - 358 |
Preparation and Characterization of BSA-Loaded Microspheres Based on Polyanhydrides
Yu Y, Lu TL, Zhao W, Sun WG, Chen T |
| 359 - 368 |
Morphology and Properties of Nylon6 and High Density Polyethylene Blends in Absence and Presence of Nanoclay
Mallick S, Khatua BB |
| 369 - 375 |
Increased Onset Temperature of Expansion in Thermally Expandable Microspheres Through Combination of Crosslinking agents
Jonsson M, Nordin O, Malmstrom E |
| 376 - 388 |
Thermal Stability of Polyoxymethylene and Its Blends with Poly(ethylene-methylacrylate) or Poly(styrene-butadiene-styrene)
Wang QA |
| 389 - 394 |
Solvent-Assisted Extrusion of Polypropylene/Clay Nanocomposites
Dal Castel C, Oviedo MAS, Liberman SA, Oliveira RVB, Mauler RS |
| 395 - 401 |
Carboxymethylcellulose-Chitosan-Coated Microneedles with Modulated Hydration Properties
Marin A, Andrianov AK |
| 402 - 409 |
Effect of Maleic Anhydride/Vinyltrimethoxysilane-co-Grafting Polypropylene on the Properties of Wood-Flour/Polypropylene Composites by Electron-Beam Preirradiation
Guo LH, Li B, Wang HF |
| 410 - 419 |
Structure and Tensile Properties of Nanoclay-Polypropylene Fibers Produced by Melt Spinning
Rangasamy L, Shim E, Pourdeyhimi B |
| 420 - 426 |
Synthesis and Characterization of the Biomaterial Poly(lactic acid-co-N-epsilon-carbobenzoyloxy-L-lysine) via Direct Melt Copolymerization
Ye RR, Wang ZY, Luo SH, Yang LT, Xiao X |
| 427 - 435 |
Performance and Biodegradability of a Maleated Polyester Bioplastic/Recycled Sugarcane Bagasse System
Wu CS |
| 436 - 444 |
Role of Interface on Dynamic Modulus of High-Performance Poly(etheretherketone)/Ceramic Composites
Goyal RK, Tiwari AN, Negi YS |
| 445 - 453 |
Phase Separation Induced Morphology Evolution and Corresponding Impact Fracture Behavior of iPP/PEOc Blends
Pang YY, Dong X, Zhao Y, Han CC, Wang DJ |
| 454 - 461 |
Syntheses of an Azo-Group-Bound Silica Initiator and Silica-Polystyrene Composites
Feng LB, Ye JF, Qiang XH, Zhang HX |
| 462 - 468 |
The Phase Behavior and Thermal Stability of Blends of Poly(styrene-co-methacrylic acid)/Poly(styrene-co-4-vinylpyridine)
Benabdelghani Z, Etxeberria A |
| 469 - 474 |
Effect of Shape and Orientation of Carbon Steel Fiber on the Modulus of Epoxy-Based Composite
Ghoraishi MS, Zadhoush A, GharehAghaji AA |
| 475 - 482 |
Interaction of Aluminoxane Particles with Weakly Charged Cationic Polyelectrolytes
Radchenko SS, Novakov IA, Radchenko PS, Cong LV, Ozerin AS, Zel'tser PS |
| 483 - 490 |
The Use of Carbon Nanotubes in Textile Printing
Krucinska I, Skrzetuska E, Urbaniak-Domagala W |
| 491 - 501 |
Functionality of Wheat Straw Lignin Extracted in Organic Acid Media
Delmas GH, Benjelloun-Mlayah B, Le Bigot Y, Delmas M |
| 502 - 507 |
Improvement of the Mechanical and Electrical Properties of Waste Rubber with Carbon Nanotubes
Mahmoud WE, El-Mossalamy EH, Arafa HM |
| 508 - 520 |
Synthesis of NR-g-PMMA by "Grafting from" Method Using ATRP Process
Vayachuta L, Phinyocheep P, Derouet D, Pascual S |
| 521 - 530 |
Cross-Linking of Ethylene-Octene Copolymer (EOC) by Dicumyl Peroxide (DCP)
Svoboda P, Poongavalappil S, Theravalappil R, Svobodova D, Mokrejs P, Kolomaznik K, Ougizawa T, Inoue T |
| 531 - 540 |
Controllable Properties and Microstructure of Hydrogels Based on Crosslinked Poly(ethylene glycol) Diacrylates with Different Molecular Weights
Zhang HB, Wang L, Song L, Niu GG, Cao H, Wang GJ, Yang HA, Zhu SQ |
| 541 - 553 |
Facile Preparation of Nylon 6 Nanocomposites Based on Clay Reinforcement and Core-Shell Latex Toughening: Morphology, Properties, and Impact Fracture Behavior
Sun SY, He YD, Wang XD, Wu DZ |
| 554 - 562 |
Mechanical and Thermal Characteristics and Morphology of Polyamide 6/Isotactic Polypropylene Blends in the Presence of a beta-Nucleating Agent
Li J, Wang SW, Yang W, Xie BH, Yang MB |
| 563 - 573 |
Synthesis and Characterization of Polymethacrylamide-Clay Nanocomposites
Anbarasan R, Arvind P, Dhanalakshmi V |
| 574 - 581 |
Degradation of High-Impact Polystyrene with Processing and Its Recovery via the Addition of Styrene-Butadiene Rubber and Styrene-Ethylene-Butylene-Styrene Block Copolymer
Parres F, Crespo JE |
| 582 - 588 |
An Efficient Method for Nitration of Aromatic Compounds Over Solid Acid and Polymer-Supported Sodium Nitrite
Zarchi MAK, Rahmani F |
| 589 - 597 |
Mechanical and Thermal Properties of Biocomposites from Poly(lactic acid) and DDGS
Li YH, Sun XS |
| 598 - 603 |
Influence of Cyanate Content on the Morphology and Properties of Epoxy Resins with Phenolphthalein Poly(ether ketone)
Li JY, Chen P, Yu Q, Ma ZM, Ma KM, Wang BC |
| 604 - 611 |
Preparation and Properties of Poly(ethylene terephthalate)/Inorganic Whiskers Composites
Li N, Luo P, Liu K, Chen L, Wang K, Chen F, Fu QA |
| 612 - 621 |
Flame-Retardant Finishing in Cotton Fabrics Using Zinc Oxide Co-Catalyst
Lam YL, Kan CW, Yuen CWM |
