| 1 - 12 |
Cellular Compatibility of Copolymer Hydrogels Based on Site-Selectively-Modified Chitosan with Poly(N-isopropyl acrylamide)
Don TM, Chou SC, Cheng LP, Tai HY |
| 13 - 20 |
Effect of Recrystallization on the Molecular Mobility of a Copolymer of Vinylidene Fluoride and Hexafluoropropylene
Kochervinskij VV, Malyshkina IA, Bessonova NP, Suljanov SN, Dembo KA |
| 21 - 35 |
Structure, Properties, and Phase Transitions of Melt-Spun Poly(vinylidene fluoride) Fibers
Steinmann W, Walter S, Seide G, Gries T, Roth G, Schubnell M |
| 36 - 42 |
MgCl2-Supported Catalyst Containing Mixed Internal Donors for Propylene Polymerization
Gao FT, Xia XZ, Mao BQ |
| 43 - 49 |
Architecture of Colloidal Crystals Constructed by Silica Hybrid Nanoparticles
Ishizu K, Tokuno Y, Lee DH, Uchida S, Ozawa M |
| 50 - 55 |
Influence of the Reactive Processing of Recycled Poly(ethylene terephthalate)/Poly(ethylene-co-glycidyl methacrylate) Blends
Kunimune N, Yamada K, Leong YW, Thumsorn S, Hamada H |
| 56 - 61 |
Synthesis and Curing Properties of a Novel Curing Agent Based on N-(4-Hydroxyphenyl) Maleimide and Dicyclopentadiene Moieties
Liu J, Zeng XL, Zhang XY, Xia XN |
| 62 - 69 |
Cure Kinetics of a Glass/Epoxy Prepreg by Dynamic Differential Scanning Calorimetry
Hayaty M, Beheshty MH, Esfandeh M |
| 70 - 78 |
Impact of Injection-Molding Processing Parameters on the Electrical, Mechanical, and Thermal Properties of Thermoplastic/Carbon Nanotube Nanocomposites
Rios PF, Ophir A, Kenig S, Efrati R, Zonder L, Popovitz-Biro R |
| 79 - 85 |
Ionic Salt Permeability Through Phase-Separated Membranes Composed of Amphoteric Polymers
Ito E, Higuchi M, Yamamoto K, Nagata K, Kinoshita T |
| 86 - 94 |
Effect of Repetitive Processing on the Mechanical Properties and Fracture Toughness of Dynamically Vulcanized iPP/EPDM Blends
Wang WK, Yang W, Bao RY, Xie BH, Yang MB |
| 95 - 100 |
Effect of the Viscosity and Processing Parameters on the Surface Resistivity of Polypropylene/Multiwalled Carbon Nanotube and Ethylene-Propylene-Diene/Multiwalled Carbon Nanotube Nanocomposites
Min KT, Kim GH |
| 101 - 108 |
Control of Molecular Weight Distribution for Polypropylene Obtained by a Commercial Ziegler-Natta Catalyst: Effect of a Cocatalyst and Hydrogen
Zhang HX, Lee YJ, Park JR, Lee DH, Yoon KB |
| 109 - 115 |
Aerobic Oxidative Polymerization of 2,6-Dimethylphenol in Water with a Highly Efficient Copper(II)-Poly(N-vinylimidazole) Complex Catalyst
Zhang WL, Wang HA, Shentu BQ, Gu C, Weng ZX |
| 116 - 123 |
Polymerization of Epoxidized Soybean Oil with Maleinized Polybutadiene
Ozturk C, Kusefoglu SH |
| 124 - 132 |
New Hybrid System: Poly(ethylene glycol) Hydrogel with Covalently Bonded Pegylated Nanotubes
Saez-Martinez V, Garcia-Gallastegui A, Vera C, Olalde B, Madarieta I, Obieta I, Garagorri N |
| 133 - 140 |
Improving Tensile Strength and Toughness of Melt Processed Polyamide 6/Multiwalled Carbon Nanotube Composites by In Situ Polymerization and Filler Surface Functionalization
Deng H, Bilotti E, Zhang R, Wang K, Zhang Q, Peijs T, Fu QA |
| 141 - 147 |
Relating Scratch Resistance to Injection Molding-Induced Morphology of Polypropylene
Kobayashi Y, Otsuki Y, Kanno H, Hanamoto Y, Kanai T |
| 148 - 155 |
Synthesis and Properties of Novel Fluorinated Epoxy Resins
Ge ZY, Tao ZQ, Li G, Ding JP, Fan L, Yang SY |
| 156 - 164 |
Surface Microphase Separation in PDMS-b-PMMA-b-PHFBMA Triblock Copolymer Films
Lian KJ, Chen CQ, Liu H, Wang NX, Yu HJ, Luo ZH |
| 165 - 183 |
FTIR Equivalent Weight Determination of Perfluorosulfonate Polymers
Perusich SA |
| 184 - 194 |
Functionalization of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Films via Surface-Initiated Atom Transfer Radical Polymerization: Comparison with the Conventional Free-Radical Grafting Procedure
Lao HK, Renard E, El Fagui A, Langlois V, Vallee-Rehel K, Linossier I |
| 195 - 201 |
Evaluation of the Availability of Easy Cationic Dyeable Copolyester Fibers as Electrostatic Flocking Piles
Liu LF, Cheng LD, Yu JY, Xie H |
| 202 - 211 |
Preparation and Characterization of UV-Curable Organic/Inorganic Hybrid Composites for NIR Cutoff and Antistatic Coatings
Chiu HT, Chang CY, Chen CL, Chiang TY, Guo MT |
| 212 - 219 |
Synthesis and Properties of Waterborne Poly(urethane urea)s Containing Polydimethylsiloxane
Lee YH, Kim EJ, Kim HD |
| 220 - 225 |
Novel Whey Protein-Based Aqueous Polymer-Isocyanate Adhesive for Glulam
Gao ZH, Wang WB, Zhao ZY, Guo MR |
| 226 - 241 |
Correlations Between Creep, Shrinkage, and Dynamic Mechanical Characteristics of Magnetic Tape Materials
Weick BL |
| 242 - 252 |
Studies on Chitosan as an Admixture for Cement-Based Materials: Assessment of Its Viscosity Enhancing Effect and Complexing Ability for Heavy Metals
Lasheras-Zubiate M, Navarro-Blasco I, Fernandez JM, Alvarez JI |
| 253 - 262 |
Silk Grafting with Methacrylamide: A Near-Infrared Spectroscopy Study
Zoccola M, Boschi A, Arosio C, Mossotti R, Innocenti R, Freddi G |
| 263 - 272 |
Application of Lime Kiln Dust as a Filler in the Natural Rubber Industry
Arayapranee W, Rempel GL |
| 273 - 278 |
Preparation and Properties of Biocomposites Composed of Epoxidized Soybean Oil, Tannic Acid, and Microfibrillated Cellulose
Shibata M, Teramoto N, Makino K |
| 279 - 290 |
Copolymers of a New Methacrylate Monomer Bearing Oxime Ester and Ether with Methyl Methacrylate: Synthesis, Characterization, Monomer Reactivity Ratios, and Biological Activity
Erol I, Kolu S |
| 291 - 297 |
Thermal and Morphological Stability of Polystyrene Microcapsules Containing Phase-Change Materials
Sanchez-Silva L, Rodriguez JF, Carmona M, Romero A, Sanchez P |
| 298 - 304 |
Styrene-Butadiene Rubber/Graphite Powder Composites: Rheometrical, Physicomechanical, and Morphological Properties
Ismail MN, Khalaf AI |
| 305 - 310 |
Wicking Properties of Various Polyamide Nanofibrous Structures with an Optimized Method
De Schoenmaker B, Van der Schueren L, De Vrieze S, Westbroek P, De Clerck K |
| 311 - 321 |
Hydroxyalkyl Derivatives of Phenyldiamine as Modifiers for Unsaturated Polyester Resins, Part 1: Derivatives of Phenyl-1,4-Diamine
Duliban J |
| 322 - 328 |
The Illumination Intensity and Applied Bias Voltage on Dielectric Properties of Au/Polyvinyl Alcohol (Co, Zn-Doped)/n-Si Schottky Barrier Diodes
Uslu H, Altindal S, Tunc T, Uslu I, Mammadov TS |
| 329 - 334 |
Effects of Atomic Oxygen and Ultraviolet in Low Earth Orbit on Low Surface Energy Polymer Film
Wang XL, Zhou F, Liu WM |
| 335 - 344 |
A Novel Route for Synthesis of Temperature Responsive Nanoparticles
Dey P, Rajora VK, Jassal M, Agrawal AK |
| 345 - 350 |
Synthesis, Characterization, and Application of Polyethersulfone Bound-Iminodiacetic Acid
Cao XL, Cheng C, Yin ZH, Bai PL, Wei QA, Fang BH, Zhao CS |
| 351 - 359 |
SEBS/PPy.DBSA Blends: Preparation and Evaluation of Electromechanical and Dynamic Mechanical Properties
Muller D, Garcia M, Salmoria GV, Pires ATN, Paniago R, Barra GMO |
| 360 - 367 |
Preparation and Properties of High-Performance Polysilsesquioxanes/Bismaleimide-Triazine Hybrids
Hu JT, Gu AJ, Liang GZ, Zhuo DX, Yuan L |
| 368 - 378 |
Research on the Related Properties of EVM/Al(OH)(3)/SiO2 Composites Applied for Halogen-Free Flame Retardant Cable Insulation and Jacket
Wang LC, Wang GL, Jiang PK |
| 379 - 389 |
Mechanical Aging Behavior of Styrene-Butadiene Rubbers Evaluated by Abrasion Test
Nakazono T, Matsumoto A |
| 390 - 396 |
Electrical and Dielectric Characteristics of Al/Polyindole Schottky Barrier Diodes. II. Frequency Dependence
Yeriskin SA, Unal HI, Sari B |
| 397 - 405 |
Polarizer Effect and Structure of Iodinated Before and After Casting Poly(vinyl alcohol) Film
Shin EJ, Lyoo WS, Lee YH |
| 406 - 410 |
Preparation and Properties of Amperometric Uric Acid Sensor Based on Poly(2-aminophenol)
Kursun S, Ekinci BZ, Pasahan A, Ekinci E |
| 411 - 418 |
Rheological and Adhesion Properties of Acrylic Pressure-Sensitive Adhesives
Taghizadeh SM, Ghasemi D |
| 419 - 424 |
The Preparation and Characterization of Crosslinked Polytriazoles with Different Network Grids
Wang XF, Wan LQ, Yanpeng EP, Huang FR, Du L |
| 425 - 433 |
A Facile Approach to Fabricate Porous Nylon 6 Nanofibers Using Silica Nanotemplate
Shi QA, Vitchuli N, Ji LW, Nowak J, McCord M, Bourham M, Zhang XW |
| 434 - 440 |
Phase Separation and Thermal Aging Behavior of Styrene-Butadiene Rubber Vulcanizates Using Liquid Polymers as Plasticizers Studied by Differential Scanning Calorimetry and Dynamic Mechanical Spectroscopy
Nakazono T, Ozaki A, Matsumoto A |
| 441 - 450 |
Swelling Dynamics of IPN Hydrogels Including Acrylamide-Acrylic Acid-Chitosan and Evaluation of their Potential for Controlled Release of Piperacillin-Tazobactam
Pulat M, Tan N, Onurdag FK |
| 451 - 457 |
High-Performance Hyperbranched Poly(phenylene oxide) Modified Bismaleimide Resin with High Thermal Stability, Low Dielectric Constant and Loss
Huang PZ, Gu AJ, Liang GZ, Yuan L |
| 458 - 465 |
Preparation, Structure, and Properties of Montmorillonite/Cellulose II/Natural Rubber Nanocomposites
Mariano RM, Picciani PHD, Nunes RCR, Visconte LLY |
| 466 - 473 |
Degradation and Initiation Polymerization Mechanism of alpha-Methylstyrene-Containing Macroinitiators
Jiang S, Deng JP, Yu QA, Yang WT |
| 474 - 483 |
Synthesis of s-Triazine-Based Hyperbranched Polyurethane for Novel Carbon-Nanotube-Dispersed Nanocomposites
Mahapatra SS, Rana S, Cho JW |
| 484 - 491 |
Effect of Microencapsulation on Dyeing Behaviors of Disperse Dyes Without Auxiliary Solubilization
Luo Y, Zhong Y, Zhang B, Du JA, Chen SL |
| 492 - 500 |
Thermoresponsive Shape Memory Characteristics of Polyurethane Electrospun Web
Chung SE, Park CH, Yu WR, Kang TJ |
| 501 - 508 |
Preparation of Raspberry-like Poly(methyl methacrylate) Particles by Seeded Dispersion Polymerization
Shi S, Zhou LM, Wang T, Bian LN, Tang YT, Kuroda S |
| 509 - 517 |
Degradation of Poly(D,L-lactic acid)-b-poly(ethylene glycol) Copolymer and Poly(L-lactic acid) by Electron Beam Irradiation
Miao PK, Wu DM, Zeng K, Zhao CE, Xu GL, Huang ZF, Yang G |
| 518 - 523 |
Preparation of Amphoteric Polyacrylamide Flocculant and Its Application in the Treatment of Tannery Wastewater
Zhu JF, Zhang GH, Li JG |
| 524 - 529 |
One-Step Fabrication of Fluoropolymer Transparent Films with Superhydrophobicity by Dry Method
Wang JM, Wang LD, Feng L |
| 530 - 537 |
Rigid Polyurethane Foam Based on Modified Vegetable Oil
Veronese VB, Menger RK, Forte MMD, Petzhold CL |
| 538 - 543 |
Synthesis of Azo Chromophores by Using a Polymer-Supported Sodium Nitrite
Zarchi MAK, Karimi M |
| 544 - 551 |
Poly(para-dioxanone)/Poly(D,L-lactide) Blends Compatibilized with Poly(D,L-lactide-co-para-dioxanone)
Bai W, Li Q, Jiang LY, Zhang ZP, Zhang SL, Xiong CD |
| 552 - 556 |
Evaluation of High Performance Fabric Under Light Irradiation
Liu XY, Yu WD, Pan N |
| 557 - 562 |
Preparation of Porous PVC Membrane via a Phase Inversion Method from PVC/DMAc/Water/Additives
Mei S, Xiao CF, Hu XY |
| 563 - 572 |
Water Absorption and Dimensional Stability of Short Kenaf Fiber-Filled Polypropylene Composites Treated with Maleated Polypropylene
Law TT, Ishak ZAM |
| 573 - 578 |
Effect of Stereoregularity and Molecular Weight on the Mechanical Properties of Poly(vinyl alcohol) Hydrogel
Fukae R, Yoshimura M, Yamamoto T, Nishinari K |
| 579 - 585 |
Preparation and Properties of Nonionic Polyol Dispersion from Terpinene-Maleic Ester-Type Epoxy Resin
Wu GM, Kong ZW, Chen JA, Jiang JC |
| 586 - 591 |
Metal Ion Removal Properties of Crosslinked Poly(acrylamide-co-2-acrylamide-2-methyl-1-propane sulfonic acid)
Rivas BL, Munoz C, Leiton L, Pooley SA |
| 592 - 598 |
Effect of Applied Voltage on Diameter and Morphology of Ultrafine Fibers in Bubble Electrospinning
Liu Y, Dong LA, Fan J, Wang R, Yu JY |
| 599 - 606 |
Ethylene Polymerization with Methylaluminoxane/(nBuCp)(2)ZrCl2 Catalyst Supported on Silica and Silica-Alumina at Different Al-MAO/Zr Molar Ratios
Carrero A, van Grieken R, Paredes B |
| 607 - 610 |
Effect of Organo-Modified Layered Silicates on Flammability Performance of High-Density Polyethylene/Rice Husk Flour Nanocomposite
Kord B |
| 611 - 622 |
Regenerability of Antibacterial Activity of Interpenetrating Polymeric N-Halamine and Poly(ethylene terephthalate)
Zhao N, Zhanel GG, Liu S |
