| 10147 - 10155 |
Water management in membrane electrolysis and options for advanced plants
Muller M, Carmo M, Glusen A, Hehemann M, Saba S, Zwaygardt W, Stolten D |
| 10156 - 10162 |
Three-dimensional VOx/NiS/NF nanosheets as efficient electrocatalyst for oxygen evolution reaction
Chai YM, Zhang XY, Lin JH, Qin JF, Liu ZZ, Xie JY, Guo BY, Yang Z, Dong B |
| 10163 - 10173 |
Overpotential analysis of alkaline and acidic alcohol electrolysers and optimized membrane-electrode assemblies
Sapountzi FM, Di Palma V, Zafeiropoulos G, Penchev H, Verheijen MA, Creatore M, Ublekov F, Sinigersky V, Bik WMA, Fredriksson HOA, Tsampas MN, Niemantsverdriet JW |
| 10174 - 10181 |
Microwave-assisted facile synthesis of cobalt-iron oxide nanocomposites for oxygen production using alkaline anion exchange membrane water electrolysis
Chen GC, Wondimu TH, Huang HC, Wang KC, Wang CH |
| 10182 - 10189 |
Co0.85Se on three-dimensional hierarchical porous graphene-like carbon for highly effective oxygen evolution reaction
Zhong QS, Xia WY, Liu BC, Xu CW, Li N |
| 10190 - 10196 |
Graphene modified fluorinated cation-exchange membranes for proton exchange membrane water electrolysis
Ion-Ebrasu D, Pollet BG, Spinu-Zaulet A, Soare A, Carcadea E, Varlam M, Caprarescu S |
| 10197 - 10206 |
Importance of activation energy in development of chemical covalent bonding in flow of Sisko magneto-nanofluids over a porous moving curved surface
Ahmad L, Khan M |
| 10207 - 10217 |
Module design of silica membrane reactor for hydrogen production via thermochemical IS process
Myagmarjav O, Tanaka N, Nomura M, Kubo S |
| 10218 - 10231 |
Metal modified hexaaluminates for syngas generation and CO2 utilization via chemical looping
Zhu YY, Liu RL, Sun XY, Ma XX, Wang XD, Tian HJ |
| 10232 - 10249 |
Experimental and theoretical analysis of a monolith type auto-thermal reforming reactor
Sayar A, Eskin N |
| 10250 - 10264 |
Enhanced hydrogen-rich syngas generation in chemical looping methane reforming using an interstitial doped La1.6Sr0.4FeCoO6
Li M, Zhao K, Zhao ZL, Li HB, He F, Lu PM |
| 10265 - 10276 |
La1-xSrxFeO3 perovskite-type oxides for chemical-looping steam methane reforming: Identification of the surface elements and redox cyclic performance
He F, Chen J, Liu S, Huang Z, Wei GQ, Wang GX, Cao Y, Zhao K |
| 10277 - 10285 |
Catalyst deactivation and regeneration during CO2 reforming of bio-oil
Xu QL, Feng P, Qi W, Huang K, Xin SZ, Yan YJ |
| 10286 - 10300 |
Effects of photo-generated gas bubbles on the performance of tandem photoelectrochemical reactors for hydrogen production
Njoka F, Mori S, Ookawara S, Ahmed M |
| 10301 - 10308 |
Hydrogen evolution under visible light illumination on the solid solution CdxZn1-xS prepared by ultrasound-assisted route
Abid H, Rekhila G, Ihaddadene FA, Bessekhouad Y, Trari M |
| 10309 - 10315 |
Preparation and characterization of alpha-Fe2O3 supported clay as a novel photocatalyst for hydrogen evolution
Mekatel E, Trari M, Nibou D, Sebai I, Amorkrane S |
| 10316 - 10327 |
An orderly assembled g-C3N4, rGO and Ni2P photocatalyst for efficient hydrogen evolution
Zhang YK, Wang GR, Jin ZL |
| 10328 - 10349 |
Supercritical water gasification of wastewater sludge for hydrogen production
Ibrahim ABA, Akilli H |
| 10350 - 10360 |
Process analysis of hydrogen production from biomass gasification in fluidized bed reactor with different separation systems
Marcantonio V, De Falco M, Capocelli M, Bocci E, Colantoni A, Villarini M |
| 10361 - 10373 |
Integrated drying and gasification of wet microalgae biomass to produce H-2 rich syngas - A thermodynamic approach by considering in-situ energy supply
Adnan MA, Hossain MM |
| 10374 - 10383 |
Thermodynamic investigation on gasification performance of sewage sludge-derived hydrochar: Effect of hydrothermal carbonization
Zheng XY, Chen W, Ying Z, Huang J, Ji SS, Wang B |
| 10384 - 10397 |
A comparative analysis of hydrogen production from the thermochemical conversion of algal biomass
Kumar M, Oyedun AO, Kumar A |
| 10398 - 10406 |
Fermentative hydrogen production from macroalgae Laminaria japonica pretreated by microwave irradiation
Yin YN, Hu J, Wang JL |
| 10407 - 10414 |
Origin of enhanced corrosion resistance of Ag and Au doped anatase TiO2
Pan Y, Guan WM |
| 10415 - 10426 |
Modeling and optimization of an industrial hydrogen unit in a crude oil refinery
Sarkarzadeh M, Farsi M, Rahimpour MR |
| 10427 - 10442 |
Mesoporous nanostructured Ni/MgAl2O4 catalysts: Highly active and stable catalysts for syngas production in combined dry reforming and partial oxidation
Jalali R, Nematollahi B, Rezaei M, Baghalha M |
| 10443 - 10452 |
A first-principles study on the hydrogenation of acetone on HxMoO3 surface
Pan QY, Huang L, Li Z, Han JJ, Zhao N, Xie YL, Li X, Liu MF, Wang XZ, Liu JM |
| 10453 - 10472 |
A review on frontiers in plasmonic nano-photocatalysts for hydrogen production
Reddy NL, Rao VN, Vijayakumar M, Santhosh R, Anandan S, Karthik M, Shankar MV, Reddy KR, Shetti NP, Nadagouda MN, Aminabhavi TM |
| 10473 - 10483 |
Ni and Ni3C catalysts supported on mesoporous silica for dry reforming of methane
Roblero JG, Pola-Albores F, Valenzuela MA, Rojas-Garcia E, Rios-Valdouinos E, Valverde-Aguilar G |
| 10484 - 10497 |
Development of paper-structured catalyst for application to direct internal reforming solid oxide fuel cell fueled by biogas
Nguyen TGH, Sakamoto M, Uchida T, Doan DCT, Dang MC, Tu PH, Sasaki K, Shiratori Y |
| 10498 - 10507 |
Construction of g-C3N4/BCN two-dimensional heterojunction photoanode for enhanced photoelectrochemical water splitting
Lei N, Li JQ, Song QQ, Liang Z |
| 10508 - 10518 |
Co-Mo-B nanoparticles supported on foam Ni as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane solution
Wang Y, Wang D, Zhao CC, Meng W, Zhao T, Cao ZQ, Zhang K, Bai SC, Li GD |
| 10519 - 10527 |
Nano-wall like visible-light active carbon modified n-TiO2 thin films for efficient photoelectrochemical oxygen separation from water
Frites M, Khan SUM |
| 10528 - 10540 |
Influence of ZnS wurtzite-sphalerite junctions on ZnOcore-ZnSshell-1D photocatalysts for H-2 production
Mendoza-Damian G, Hernandez-Gordillo A, Fernandez-Garcia ME, Acevedo-Pena P, Tzompantzi-Morales FJ, Perez-Hernandez R |
| 10541 - 10553 |
Highly broadband plasmonic Cu film modified Cu2O/TiO2 nanotube arrays for efficient photocatalytic performance
Rekeb L, Hamadou L, Kadri A, Benbrahim N, Chainet E |
| 10554 - 10560 |
Bare Ni foam electrode-ferricyanides redox electrolyte system with high capacitive performance
Gao ZY, Chen LM, Chang JL, Wang Z, Wu DP, Xu F, Jiang K |
| 10561 - 10572 |
Novel activated carbon supported trimetallic PdCoAg nanoparticles as efficient catalysts for the hydrolytic dehydrogenation of ammonia borane
Kazici HC, Yildiz F, Izgi MS, Ulas B, Kivrak H |
| 10573 - 10584 |
CdS supported on electrochemically reduced rGO for photo reduction of water to hydrogen
Ranjan R, Kumar M, Sinha ASK |
| 10585 - 10592 |
One-pot solvothermal synthesis of 1D plasmonic TiO2@Ag nanorods with enhanced visible-light photocatalytic performance
Zhou XS, Jin B, Luo J, Ning XM, Zhan L, Xu XY, Fan XL, Yang F, Zhang SQ |
| 10593 - 10603 |
Tailoring electrochemical efficiency of hydrogen evolution by fine tuning of TiOx/RuOx composite cathode architecture
Fedorov FS, Vasilkov MY, Panov M, Rupasov D, Rashkovskiy A, Ushakov NM, Lee J, Hempelmann R, Kallio T, Nasibulin AG |
| 10604 - 10615 |
Loading and promoter effects on the performance of nitrogen functionalized graphene nanosheets supported cobalt Fischer-Tropsch synthesis catalysts
Taghavi S, Tavasoli A, Asghari A, Signoretto M |
| 10616 - 10626 |
Influence of the carbon support on the Pt-Sn anodic catalyst for the electrochemical reforming of ethanol
Calcerrada AB, de la Osa AR, Lopez-Fernandez E, Dorado F, de Lucas-Consuegra A |
| 10627 - 10636 |
Boosting the oxygen evolution electrocatalysis of layered nickel hydroxidenitrate nanosheets by iron doping
Liu YY, Han N, Jiang J, Ai LH |
| 10637 - 10645 |
Carbon-supported phosphatized CuNi nanoparticle catalysts for hydrazine electrooxidation
Wang W, Wang YH, Liu SJ, Yahia M, Dong YJ, Lei ZQ |
| 10646 - 10652 |
Pt-CeO2/TiN NTs derived from metal organic frameworks as high-performance electrocatalyst for methanol electrooxidation
Zhou QM, Pan ZC, Wu DY, Hu GH, Wu SK, Chen C, Lin LH, Lin YS |
| 10653 - 10665 |
A numerical investigation on H-2 separation by a conical palladium membrane
Ghohe FM, Hormozi F |
| 10666 - 10676 |
Amelioration of PEMFC performance at high temperature by incorporation of nanofiller (sepiolite/layered double hydroxide) in Nafion membrane
Charradi K, Ahmed Z, Cid RE, Aranda P, Ruiz-Hitzky E, Ocon P, Chtourou R |
| 10677 - 10693 |
Review on the research of hydrogen storage system fast refueling in fuel cell vehicle
Li MX, Bai YF, Zhang CZ, Song YX, Jiang SF, Grouset D, Zhang MJ |
| 10694 - 10712 |
Recent advances in magnesium-based hydrogen storage materials with multiple catalysts
Xie XB, Chen M, Hu MM, Wang BL, Yu RH, Liu T |
| 10713 - 10721 |
Promising electrochemical hydrogen storage properties of nano biomass derived from walnut shell
Hajialigol S, Masoum S |
| 10722 - 10731 |
Compositional effects on the hydrogen cycling stability of multicomponent Ti-Mn based alloys
Nayebossadri S, Book D |
| 10732 - 10743 |
Structure and defects evolution at temperature and activation treatments of the TiCr2 intermetallic compound of Laves phase C36-type
Murashkina TL, Syrtanov MS, Laptev RS, Stepanova EN, Lider AM |
| 10744 - 10751 |
Monodisperse ruthenium-copper alloy nanoparticles decorated on reduced graphene oxide for dehydrogenation of DMAB
Sen B, Kuyuldar E, Savk A, Calimli H, Duman S, Sen F |
| 10752 - 10762 |
Small hydrogen storage tank filled with 2LiBH(4)-MgH2 nanoconfined in activated carbon: Reaction mechanisms and performances
Dansirima P, Thiangviriya S, Plerdsranoy P, Utke O, Utke R |
| 10763 - 10769 |
A theoretical study on cage-like clusters (C-12-Ti-6 and C-12-Ti-6(2+)) for dihydrogen storage
Guo C, Wang C |
| 10770 - 10776 |
Fast synthesis of TiNi by mechanical alloying and its hydrogenation properties
Nobuki T, Criuello JC, Cuevas F, Joubert JM |
| 10777 - 10787 |
Boosting low-temperature de/re-hydrogenation performances of MgH2 with Pd-Ni bimetallic nanoparticles supported by mesoporous carbon
Cheng HH, Chen G, Zhang Y, Zhu YF, Li LQ |
| 10788 - 10799 |
Microstructural evolution and hydrogen storage properties of a Ni-modified Mg15Al alloy
Chen H, Zhang TB, Xie LS, Song L |
| 10800 - 10807 |
Evaluation of a BCC alloy as metal hydride compressor via 100 MPa-class high-pressure hydrogen apparatus
Goshome K, Endo N, Tetsuhiko M |
| 10808 - 10822 |
Assessment of resistance to fatigue crack growth of natural gas line pipe steels carrying gas mixed with hydrogen
Dadfarnia M, Sofronis P, Brouwer J, Sosa S |
| 10823 - 10832 |
Binder free and high performance of sputtered tungsten nitride thin film electrode for supercapacitor device
Prakash R, Kumar A, Pandey A, Kaur D |
| 10833 - 10837 |
Nuclear hydrogen structure and dimensions
Petrescu FIT, Petrescu RVV |
| 10838 - 10851 |
One-pot sonochemical synthesis of hierarchical MnWO4 microflowers as effective electrodes in neutral electrolyte for high performance asymmetric supercapacitors
Raj BGS, Acharya J, Seo MK, Khil MS, Kim HY, Kim BS |
| 10852 - 10905 |
High capacity conversion anodes in Li-ion batteries: A review
Bhatt MD, Lee JY |
| 10906 - 10915 |
Performance analysis of metal hydride based simultaneous cooling and heat transformation system
Mohan M, Sharma M, Sharma VK, Kumar EA, Satheesh A, Muthukumar P |
| 10916 - 10924 |
Exergy analysis of the diesel pre-reforming SOFC-system with anode off-gas recycling in the SchIBZ project. Part II: System exergetic evaluation
Huerta GV, Jordan JA, Marquardt T, Dragon M, Leites K, Kabelac S |
| 10925 - 10932 |
A discussion on mathematical models of proton conducting Solid Oxide Fuel Cells
Milewski J, Szczesniak A, Szablowski L |
| 10933 - 10950 |
Automated design of direct methanol fuel cell stacks: A quick optimization
Santiago O, Aranda-Rosales M, Navarro E, Raso MA, Leo TJ |
| 10951 - 10963 |
Highly efficient and ORR active platinum-scandium alloy-partially exfoliated carbon nanotubes electrocatalyst for Proton Exchange Membrane Fuel Cell
Garapati MS, Sundara R |
| 10964 - 10970 |
Structural and electrochemical studies of microwave sintered nanocomposite electrolytes for solid oxide fuel cells
Ullah MK, Ahmad N, Khan SUD, Alui F, Abbas G, Rafique A, Ali A, Ahmad MA, Raza R |
| 10971 - 10981 |
Amorphous NiB alloy decorated by Cu as the anode catalyst for a direct borohydride fuel cell
Yin XL, Wang Q, Duan DH, Liu SB, Wang YF |
| 10982 - 10995 |
Efficient oxygen reduction in a microbial fuel cell based on carbide-derived carbon electrode synthesized using thiourea as the single source of electroconductive heteroatoms and graphitic carbon
Pophali A, Yadau A, Verma N |
| 10996 - 11011 |
Selective methodology for developing PtCo NPs and performance screening for energy efficient electro-catalysis in direct ethanol fuel cell
Mondal A, De A, Datta J |
| 11012 - 11019 |
Modelling, simulation and control of a fuel cell-powered laptop computer voltage regulator module
RavindranathTagore Y, Anuradha K, Babu ARV, Kumar PM |
| 11020 - 11032 |
Synthesis, characterization and electrochemical properties of La2-xEuxNiO4+delta Ruddlesden-Popper-type layered nickelates as cathode materials for SOFC applications
Garali M, Kahlaoui M, Mohammed B, Mater A, ben Azouz C, Chefi C |
| 11033 - 11046 |
Effect of the geometrical size on time dependent failure probability of the solid oxide fuel cell
Zhang YC, Lu MJ, Jiang WC, Tu ST, Zhang XC |
| 11047 - 11056 |
Anode bleeding experiments to improve the performance and durability of proton exchange membrane fuel cells
Eskin MG, Yesilyurt S |
| 11057 - 11065 |
Fluorene-containing poly(arylene ether sulfone)s with imidazolium on flexible side chains for anion exchange membranes
Shen B, Pu HT |
| 11066 - 11078 |
Synthesis of star shaped electroactive, LEB state aniline oligomer and its high performing Pt and Pt-Au nanocatalyst for MOR
Thota A, Boga K, Narayan R, Bojja S, Rao CRK |
| 11079 - 11087 |
A novel anions and cations co-doped strategy for developing high-performance cobalt-free cathode for intermediate-temperature proton-conducting solid oxide fuel cells
Liu JJ, Jin ZZ, Miao LN, Ding JW, Tang HD, Gong Z, Peng RR, Liu W |
| 11088 - 11096 |
Modeling of droplet detachment using dynamic contact angles in polymer electrolyte fuel cell gas channels
Andersson M, Vukcevic V, Zhang S, Qi Y, Jasak H, Beale SB, Lehnert W |
| 11097 - 11110 |
Laminar burning characteristics of premixed methane-dissociated methanol-diluent mixtures
Lu LL, Pei YQ, Qin J, Zuo ZN, Xu H |
| 11111 - 11120 |
On the observation of high-order, multi-mode, thermo-acoustic combustion instability in a model gas turbine combustor firing hydrogen containing syngases
Kim YJ, Yoon Y, Lee MC |
| 11121 - 11133 |
Effects of surface roughness on mixed convection nanoliquid flow over slender cylinder with liquid hydrogen diffusion
Patil PM, Shashikant A, Hiremath PS |
| 11134 - 11144 |
Design and numerical analysis of a 3 kWe flameless microturbine combustor for hydrogen fuel
Bazooyar B, Darabkhani HG |
| 11145 - 11152 |
Hybrid H-2/Ti dust explosion hazards during the production of metal hydride TiH2 in a closed vessel
Cheng YF, Song SX, Ma HH, Su J, Han TF, Shen ZW, Meng XR |
| 11153 - 11160 |
The effect of dilution on the diffusive-thermal instability of the rich premixed hydrogen deflagration
Gubernov VV, Bykov V, Maas U |
| 11161 - 11167 |
Hydrogen-oxygen steam generator for a closed hydrogen combustion cycle
Aminov RZ, Egorov AN |
| 11168 - 11184 |
Investigating the effect of local addition of hydrogen to acoustically excited ethylene and methane flames
Hussain T, Talibi M, Balachandran R |
| 11185 - 11193 |
Effect of hydrogen ratio on turbulent flame structure of oxyfuel syngas at high pressure up to 1.0 MPa
Wang JH, Guo SL, Zhang WJ, Zhang M, Huang ZH |
| 11194 - 11204 |
Effects of split injection proportion and the second injection timings on the combustion and emissions of a dual fuel SI engine with split hydrogen direct injection
Li GT, Yu XM, Shi WB, Yao CZ, Wang S, Shen QX |
| 11205 - 11218 |
Effect of addition of hydrogen and TiO2 in gasoline engine in various exhaust gas recirculation ratio
Manigandan S, Gunasekar P, Poorchilamban S, Nithya S, Devipriya J, Vasanthkumar G |
| 11219 - 11232 |
Life cycle CO2 emissions from power generation using hydrogen energy carriers
Ozawa A, Kudoh Y, Kitagawa N, Muramatsu R |
| 11233 - 11239 |
An improved method for hydrogen deflagration to detonation transition prediction under severe accidents in nuclear power plants
Zhang XL, Yu JY, Huang T, Jiang GM, Zhong XP, Saeed M |
| 11240 - 11246 |
The choice of noble electrolyte for symmetric polyurethane-graphene composite supercapacitors
Mundinamani S |
| 11247 - 11258 |
Numerical modelling of transient heat transfer of hydrogen composite cylinders subjected to fire impingement
Xu BP, Cheng CL, Wen JX |
| 11259 - 11265 |
Two operating modes of palladium film hydrogen sensor based on suspended micro hotplate
Liu Q, Yao JY, Wu YJ, Wang YP, Ding GF |
| 11266 - 11274 |
Facial fabrication of an inorganic/organic thermoelectric nanocomposite based gas sensor for hydrogen detection with wide range and reliability
Kim S, Song Y, Hwang TY, Lim JH, Choa YH |
| 11275 - 11276 |
Criticism of: "Effects of various factors on the hydrogen isotope separation efficiency of a novel hydrophobic platinum-polytetrafluoroethylene catalyst", author Feng Huang (International Journal of Hydrogen Energy, V. 43 (2018), p. 1718-1724)
Rozenkevich M |
| 11277 - 11278 |
Response to Criticism of: "Effects of various factors on the hydrogen isotope separation efficiency of a novel hydrophobic platinum-polytetrafluoroethylene catalyst", author Feng Huang (International Journal of Hydrogen Energy, V. 43 (2018), p. 1718-1724)
Huang F |
