| 12047 - 12063 |
Thermal Hydrogen: An emissions free hydrocarbon economy
Moore J |
| 12064 - 12075 |
Poly(arylene ether)s bounded with disulfonaphthoxyl pendants by post functionalization for polymer electrolyte membrane application in fuel cells
Hu ZX, Lu Y, Zhang X, Gao Q, Yan XB, Chen SW |
| 12076 - 12086 |
High pressure polymer electrolyte water electrolysis: Test bench development and electrochemical analysis
Suermann M, Patru A, Schmidt TJ, Buchi FN |
| 12087 - 12093 |
Electrochemical performance of gel polymer electrolyte with ionic liquid and PUA/PMMA prepared by ultraviolet curing technology for lithium-ion battery
Li LB, Wang FR, Li JS, Yang XY, You J |
| 12094 - 12103 |
Experimental studies and modeling of advanced alkaline water electrolyser with porous nickel electrodes for hydrogen production
Sandeep KC, Kamath S, Mistry K, Kumar MS, Bhattacharya SK, Bhanja K, Mohan S |
| 12104 - 12110 |
High activity oxide Pr0.3Sr0.7Ti0.3Fe0.7O3-delta as cathode of SOEC for direct high-temperature steam electrolysis
Zhang LJ, Wang ZH, Cao ZQ, Zhu L, Li PZ, Li JW, Lu Z |
| 12111 - 12121 |
Gas-solids kinetics of CuO/Al2O3 as an oxygen carrier for high-pressure chemical looping processes: The influence of the total pressure
Pio MAS, Gallucci F, Roghair I, van Sint Annaland M |
| 12122 - 12132 |
Preparation of carbon dots/TiO2 electrodes and their photoelectrochemical activities for water splitting
Sang LX, Lin J, Zhao YB |
| 12133 - 12142 |
Analyzing the effects of reaction temperature on photo-thereto chemical synergetic catalytic water splitting under full-spectrum solar irradiation: An experimental and thermodynamic investigation
Liang HX, Wang FQ, Cheng ZM, Hu SP, Xiao B, Gong XT, Lin B, Tan JY, Li XZ, Cao RY, Liang W, Liu LH |
| 12143 - 12152 |
Photo-bioreactor structure and light-heat-mass transfer properties in photo-fermentative bio-hydrogen production system: A mini review
Zhang ZP, Zhou XH, Hu JJ, Zhang T, Zhu SN, Zhang QG |
| 12153 - 12158 |
Enhancement of fermentative biohydrogen production from textile desizing wastewater via coagulation-pretreatment
Lin CY, Chiang CC, Nguyen MLT, Lay CH |
| 12159 - 12172 |
Impact of furfural on biological hydrogen production kinetics from synthetic lignocellulosic hydrolysate using mesophilic and thermophilic mixed cultures
Akobi C, Hafez H, Nakhla G |
| 12173 - 12180 |
Isolation and characterization of a novel strain Clostridium butyricum INET1 for fermentative hydrogen production
Yin YN, Wang JL |
| 12181 - 12196 |
Calcium dosing for the simultaneous control of biomass retention and the enhancement of fermentative biohydrogen production in an innovative fixed-film bioreactor
Maria V, Blanco C, Fuess LT, Zaiat M |
| 12197 - 12209 |
Catalytic performance and characterization of Neodymium-containing mesoporous silica supported nickel catalysts for methane reforming to syngas
Li BT, Su WF, Lin XR, Wang XJ |
| 12210 - 12219 |
In-situ fabrication of CuS/g-C3N4 nanocomposites with enhanced photocatalytic H-2-production activity via photoinduced interfacial charge transfer
Chen TJ, Song CJ, Fan MS, Hong YZ, Hu B, Yu LB, Shi WD |
| 12220 - 12235 |
Hydrogen production with a low carbon monoxide content via methanol steam reforming over CuxCeyMgz/Al2O3 catalysts: Optimization and stability
Phongboonchoo Y, Thouchprasitchai N, Pongstabodee S |
| 12236 - 12245 |
Highly efficient methanol electrooxidation catalyzed by co-action of Pd-Y2O3 in alkaline solution for fuel cells
Li JX, Wang SL, Zhang BG, Wang W, Feng LG |
| 12246 - 12253 |
Flower-like CoS2/MoS2 nanocomposite with enhanced electrocatalytic activity for hydrogen evolution reaction
Chen LL, Yang WX, Liu XJ, Jia JB |
| 12254 - 12261 |
Hybrid of AgInZnS and MoS2 as efficient visible-light driven photocatalyst for hydrogen production
Huang T, Chen W, Liu TY, Hao QL, Liu XH |
| 12262 - 12275 |
CO reactive adsorption at low temperature over CuO/CeO2 structured catalytic monolith
Di Benedetto A, Landi G, Lisi L |
| 12276 - 12283 |
TiO2/CeO2 core/shell heterojunction nanoarrays for highly efficient photoelectrochemical water splitting
Han CC, Yan L, Zhao W, Liu ZF |
| 12284 - 12294 |
Oxidative steam reforming of ethanol (OSRE) over stable NiCo-MgAl catalysts by microwave or sonication assisted coprecipitation
Munoz M, Moreno S, Molina R |
| 12295 - 12300 |
One-pot synthesis of NiO/SBA-15 monolith catalyst with a three-dimensional framework for CO2 methanation
Liu Q, Tian YY |
| 12301 - 12309 |
Enhanced hydrogen permeability and reverse water-gas shift reaction activity via magneli Ti4O7 doping into SrCe0.9Y0.1O3-delta hollow fiber membrane
Wang TT, Wang HN, Meng XX, Meng B, Tan XY, Sunarso J, Liu SM |
| 12310 - 12319 |
Diffusion barrier coating using a newly developed blowing coating method for a thermally stable Pd membrane deposited on porous stainless-steel support
Han JY, Kim CH, Lim H, Lee KY, Ryi SK |
| 12320 - 12326 |
Sol-gel auto combustion synthesis of BaFe18O27 nanostructures for adsorptive desulfurization of liquid fuels
Mandizadeh S, Sadri M, Salavati-Niasari M |
| 12327 - 12338 |
Decoration of doped C-60 fullerene with alkali metals: Prototype nanomaterial with enhanced binding energy toward hydrogen
Omidvar A, Mohajeri A |
| 12339 - 12354 |
Process optimization for large-scale hydrogen liquefaction
Cardella U, Decker L, Sundberg J, Klein H |
| 12355 - 12363 |
Autonomous WPP/HPP power system operating modes study
Elistratov VV, Vinogradova AV |
| 12364 - 12374 |
Design, development, construction and operation of a novel metal hydride compressor
Karagiorgis G, Christodoulou CN, von Storch H, Tzamalis G, Deligiannis K, Hadjipetrou D, Odysseos M, Roeb M, Sattler C |
| 12375 - 12383 |
Significant enhancement of electrosorption of hydrogen into palladium via a facile annealing process
Konda SK, Amiri M, Chen AC |
| 12384 - 12395 |
Nanostructured mixed transition metal oxides for high performance asymmetric supercapacitors: Facile synthetic strategy
Tajik S, Dubal DP, Gomez-Romero P, Yadegari A, Rashidi A, Nasernejad B, Inamuddin, Asiri AM |
| 12396 - 12404 |
Performance of 26650 Li-ion cells at elevated temperature under simulated PHEV drive cycles
Badami P, Opitz A, Shen L, Vaidya R, Mayyas A, Knoop K, Razdan A, Kannan AM |
| 12405 - 12413 |
Alkali metal silanides alpha-MSiH3: A family of complex hydrides for solid-state hydrogen storage
Zhang J, Yan S, Qu H, Yu XF, Peng P |
| 12414 - 12419 |
Composite sodium p-toluenesulfonate/polypyrrole/TiO2 nanotubes/Ti anode for sodium ion battery
Liao QS, Hou HY, Duan JX, Liu S, Yao Y, Dai ZP, Yu CY, Li DD |
| 12420 - 12429 |
Facile precipitation synthesis and electrochemical evaluation of Zn2SnO4 nanostructure as a hydrogen storage material
Masjedi-Arani M, Salavati-Niasari M |
| 12430 - 12447 |
Overview and investigation of the planned dynamic voltage restorer for autonomous electrical grid: Case of Adrar, south of Algeria
Berbaoui B |
| 12448 - 12457 |
Generation of excited electronic states at the nonmetal surface by the hydrogen atoms beam
Tyurin YI, Nikitenkov NN, Sigfusson IT, Hashhash A, Van YM, Tolmacheva ND |
| 12458 - 12466 |
Nickel-graphene nanocomposite with improved electrochemical performance for La0.7Mg0.3(Ni0.85Co0.15)(3.5) electrode
Lan ZQ, Zeng K, Wei B, Li GX, Ning H, Guo J |
| 12467 - 12476 |
A novel TIN coated CNTs nanocomposite CNTs@TiN supported Pt electrocatalyst with enhanced catalytic activity and durability for methanol oxidation reaction
Liu G, Pan ZC, Zhang B, Xiao J, Xia GW, Zhao QX, Shi SK, Hu GH, Xiao CM, Wei ZG, Xu YB |
| 12477 - 12484 |
Performance of Co-Ni-O spinel oxide coating on AISI 430 stainless steel as interconnect for intermediate temperature solid oxide fuel cell
Cheng FP, Cui JL, Wang LX, Li S, Sun JC |
| 12485 - 12495 |
Improvement of corrosion properties of porous alloy supports for solid oxide fuel cells
Stange M, Denonville C, Larring Y, Brevet A, Montani A, Sicardy O, Mougin J, Mougin J |
| 12496 - 12506 |
Poly(arylene ether ketone) with pendant pyridinium groups for alkaline fuel cell membranes
Kim S, Yang S, Kim D |
| 12507 - 12520 |
Development of ultra-low highly active and durable hybrid compressive platinum lattice cathode catalysts for polymer electrolyte membrane fuel cells
Kim T, Xie TY, Jung WS, Popov BN |
| 12521 - 12530 |
Experimental and theoretical analysis of ionomer/carbon ratio effect on PEM fuel cell cold start operation
Xie X, Zhang GB, Zhou JX, Jiao K |
| 12531 - 12542 |
Parametric analysis of simultaneous humidification and cooling for PEMFCs using direct water injection method
Choi EJ, Hwang SH, Park J, Kim MS |
| 12543 - 12550 |
Effect of anode thickness and Cu content on consolidation and performance of planar copper-based anode-supported SOFC
De Marco V, Iannaci A, Rashid S, Sglavo VM |
| 12551 - 12558 |
Ex-situ probing of PEFC liquid droplet dynamics in the presence of vibration
Sellman JT, Santamaria AD |
| 12559 - 12566 |
The effect of Pt/C agglomerates in electrode on PEMFC performance using 3D micro-structure lattice models
Zhang JJ, Wang YX, Zhang JF, Liang J, Lu J, Xu L |
| 12567 - 12573 |
Long-term stability of Ni-Sn porous metals for cathode current collector in solid oxide fuel cells
Hiraiwa C, Tawarayama H, Ota H, Higashino T, Okuno K, Majima M |
| 12574 - 12582 |
Enhanced electricity generation for biocathode microbial fuel cell by in situ microbial-induced reduction of graphene oxide and polarity reversion
Chen JF, Hu YY, Huang WT, Zhang LH |
| 12583 - 12592 |
Stabilization of PtRu electrocatalyst by nitrogen doped carbon layer derived from carbonization of poly(vinyl pyrrolidone)
Yang ZH, Cai WW, Zhang Q, Ling Y, Yu XX, Zhang YF |
| 12593 - 12600 |
Self-assembled graphene film to enable highly conductive and corrosion resistant aluminum bipolar plates in fuel cells
Chen P, Fang FF, Zhang ZN, Zhang W, Wang YX |
| 12601 - 12614 |
Effect of powder morphology on the microstructural characteristics of La0.6Sr0.4Co0.2Fe0.8O3 cathode: A Kinetic Monte Carlo investigation
Yan ZL, Hara S, Shikazono N |
| 12615 - 12628 |
Methane-hydrogen fuel blends for SI engines in Brazilian public transport: Potential supply and environmental issues
Nadaleti WC, Przybyla G, Belli P, de Souza SNM, Quadro M, Andreazza R |
| 12629 - 12644 |
Amplitude modulated instability in reactants plenum of a rotating detonation combustor
Anand V, St George A, Gutmark E |
| 12645 - 12656 |
Experimental and kinetic study on ignition delay times of lean n-butane/hydrogen/argon mixtures at elevated pressures
Jiang X, Pan YS, Liu Y, Sun WC, Huang ZH |
| 12657 - 12668 |
Effect of initial pressure on flame-shock interaction of hydrogen-air premixed flames
Wei HQ, Xu ZL, Zhou L, Gao DZ, Zhao JF |
| 12669 - 12680 |
Experimental study of the combustion of natural gas and high-hydrogen content syngases in a radiant porous media burner
Arrieta CE, Garcia AM, Amell AA |
| 12681 - 12695 |
Kinetic interplay between hydrogen and carbon monoxide in syngas-fueled catalytic micro-combustors
Chen JJ, Yan LF, Song WY, Xu DG |
| 12696 - 12705 |
Idle performance of a hydrogen/gasoline rotary engine at lean condition
Su T, Ji CW, Wang SF, Shi L, Yang JX, Cong XY |
| 12706 - 12723 |
Overview of hydrogen embrittlement in high-Mn steels
Koyama M, Akiyama E, Lee YK, Raabe D, Tsuzaki K |
| 12724 - 12734 |
Acceleration of hydrogen/air flames in a cylindrical envelope
Golub VV, Korobou AE, Mikushkin AY, Solntseu OI, Volodin VV |
| 12735 - 12737 |
Towards valorization of hydrogen energy production and storage: A preface to the special issue section on "The 7th International Renewable Energy Congress (IREC), 22-24 Mach 2016, Hammamet, Tunisia"
Meniai AH |
| 12738 - 12748 |
Validation of a methodology for determining the PEM fuel cell complex impedance modelling parameters
Bouaicha A, Allagui H, Aglzim EH, Rouane A, Mami A |
| 12749 - 12758 |
Synthesis and characterization of proton exchange poly (phenylenebenzophenone)s membranes grafted with propane sulfonic acid on pendant phenyl groups
Sutradhar SC, Jang H, Banik N, Yoo J, Ryu T, Yang H, Yoon S, Kim W |
| 12759 - 12767 |
Anion conductive tetra-sulfonium hydroxides poly(fluorenylene ether sulfone) membrane for fuel cell application
Fang H, Hossain MA, Sutradhar SC, Ahmed F, Choi K, Ryu T, Kim K, Kim W |
| 12768 - 12776 |
Studies of sulfonated poly(phenylene)-block-poly(ethersulfone) for proton exchange membrane fuel cell
Jang H, Ryu T, Sutradhar SC, Ahmed F, Choi K, Yang H, Yoon S, Kim W |
| 12777 - 12789 |
Performance study and efficiency improvement of Hybrid Electric System dedicated to transport application
Sami BS, Sihem N, Zafar B, Adnane C |
| 12790 - 12796 |
HIL simulation approach for a multicellular converter controlled by sliding mode
Ben Said S, Ben Saad K, Benrejeb M |
| 12797 - 12807 |
The effect of the discharge rate on the electrochemical properties of AB3-type hydrogen storage alloy as anode in nickel-metal hydride batteries
Ben Belgacem Y, Khaldi C, Lamloumi J |
| 12808 - 12817 |
CO2 reforming of methane over NixMg6-xAl2 catalysts: Effect of lanthanum doping on catalytic activity and stability
Dandah E, Abou Rached J, Aouad S, Gennequin C, Tidahy HL, Estephane J, Aboukais A, Aad EA |
| 12818 - 12828 |
Syngas production by the CO2 reforming of CH4 over Ni-Co-Mg-Al catalysts obtained from hydrotalcite precursors
Tanios C, Bsaibes S, Gennequin C, Labaki M, Cazier F, Billet S, Tidahy HL, Nsouli B, Aboukais A, Abi-Aad E |
| 12829 - 12840 |
Ni based catalysts promoted with cerium used in the steam reforming of toluene for hydrogen production
Abou Rached J, El Hayek C, Dandah E, Gennequin C, Aouad S, Tidahy HL, Estephane J, Nsouli B, Aboukais A, Abi-Aad E |
| 12841 - 12855 |
How the BoP configuration affects the performance in an air-cooled polymer electrolyte fuel cell. Keys to design the best configuration
de las Heras A, Vivas FJ, Segura F, Andujar JM |
| 12856 - 12864 |
Performance analysis of two combined cycle power plants with different steam injection system design
Kilani N, Khir T, Ben Brahim A |
| 12865 - 12876 |
Predictive control for hydrogen production by electrolysis in an offshore platform using renewable energies
Serna A, Yahyaoui I, Normey-Rico JE, de Prada C, Tadeo F |
| 12877 - 12887 |
Energy and exergy investigation of R1234ze as R134a replacement in vapor compression chillers
Ben Jemaa R, Mansouri R, Boukholda I, Bellagi A |
| 12888 - 12895 |
A novel multigenerational hydrogen production system: Performance evaluation
Rabbani H, Dincer I, Rahnamayan S |
| 12896 - 12904 |
Glycerol steam reforming for hydrogen and synthesis gas production
Tamosiunas A, Valatkevicius P, Gimzauskaite D, Valincius V, Jeguirim M |
| 12905 - 12911 |
Flows consumption assessment study for fuel cell vehicles: Towards a popularization of FCVs technology
Abderezzak B, Busawon K, Binns R |
| 12912 - 12919 |
Supercritical CO2 extraction of essential oil from Algerian Argan (Argania spinosa L.) seeds and yield optimization
Haloui I, Meniai AH |
| 12920 - 12925 |
A predictive approach for thermodynamic modeling of solubility in supercritical fluids using genetic algorithm
Bezaze H, Meniai AH |
| 12926 - 12932 |
Modeling and optimization of phenol hydrothermal oxidation in supercritical water
Nadjiba B, Nawel O, Hassen MA |
| 12933 - 12942 |
Respirometric evaluation of S-0/X-0 ratio effect on the kinetic and stoechiometric parameters of activated sludge
Sakhraoui M, Zamouche-Zerdazi R, Bencheikh-Lehocine M, Meniai AH |
