| 1 |
Effect of open assembly time and equilibrium moisture content on the penetration of polyurethane adhesive into thermally modified wood
Bastani A, Adamopoulos S, Militz H
Journal of Adhesion, 93(7), 575, 2017 |
| 2 |
Behavior of phenol adsorption on thermal modified activated carbon
Zhang DF, Huo PL, Liu W
Chinese Journal of Chemical Engineering, 24(4), 446, 2016 |
| 3 |
Enhancing removal and recovery of magnesium from aqueous solutions by using modified zeolite and bentonite and process optimization
Shahmirzadi MAA, Hosseini SS, Tan NR
Korean Journal of Chemical Engineering, 33(12), 3529, 2016 |
| 4 |
Reducing the moisture sensitivity of linear friction welded birch (Betula pendula L.) wood through thermal modification
Ruponen J, Cermak P, Rheme M, Rautkari L
Journal of Adhesion Science and Technology, 29(22), 2461, 2015 |
| 5 |
Influence of treatment temperature on wettability of Norway spruce thermally modified in vacuum
Kutnar A, Kricej B, Pavlic M, Petric M
Journal of Adhesion Science and Technology, 27(9), 963, 2013 |
| 6 |
Wood welding: Chemical and physical changes according to the welding time
Ganne-Chedeville C, Properzi M, Leban JM, Pizzi A, Pichelin F
Journal of Adhesion Science and Technology, 22(7), 761, 2008 |
| 7 |
Mechanism of lithium insertion in hollow carbon fibers-based anode
Skowronski JM, Knofczynski K, Yamada Y
Solid State Ionics, 157(1-4), 133, 2003 |
