| 1 |
Pressure drop axial distribution uniformity of the particle bed in the radial bed
Wu T, Wang D, Wang R, Zhao B, Tang M, Zhang S, Nie L
Korean Journal of Chemical Engineering, 38(8), 1578, 2021 |
| 2 |
Experimental investigation of proppant particles transport in a tortuous fracture
Qu H, Tang SM, Liu ZH, Mclennan J, Wang R
Powder Technology, 382, 95, 2021 |
| 3 |
Simulation of particle bed breakage by slow compression and impact using a DEM particle replacement model
Barrios GKP, Jimenez-Herrera N, Tavares LM
Advanced Powder Technology, 31(7), 2749, 2020 |
| 4 |
Two types of particle dynamics in the passive layer of a granular bed composed of irregular particles
Li R, Zheng G, Chen Q, Xiu WZ, Yang H
Powder Technology, 362, 231, 2020 |
| 5 |
Experimental study on evaluation of effective diameter for non-spherical particles in predicting pressure gradients of water/air two-phase flow in particle beds
Park JH, Park HS, Lee M
International Journal of Heat and Mass Transfer, 140, 139, 2019 |
| 6 |
A new model for simulating particle transport in a low-viscosity fluid for fluid-driven fracturing
Hu XD, Wu K, Song XZ, Yu W, Tang JZ, Li GS, Shen ZH
AIChE Journal, 64(9), 3542, 2018 |
| 7 |
Computational fluid dynamics simulations of a binary particle bed in a riser-based carbon stripper for chemical looping combustion
Banerjee S, Agarwal RK
Powder Technology, 325, 361, 2018 |
| 8 |
Effects of main particle diameter on improving particle flowability for compressed packing fraction in a smaller particle admixing system
Yoshida M, Misumi A, Oshitani J, Gotoh K, Shimosaka A, Shirakawa Y
Advanced Powder Technology, 28(10), 2542, 2017 |
| 9 |
Expansion behaviour of a binary solid-liquid fluidised bed with different solid mass ratio
Khan MS, Evans GM, Peng ZB, Doroodchi E, Moghtaderi B, Joshi JB, Mitra S
Advanced Powder Technology, 28(12), 3111, 2017 |
| 10 |
Effect of grid type and refinement method on CFD-DEM solution trend with grid size
Volk A, Ghia U, Stoltz C
Powder Technology, 311, 137, 2017 |
