| 1 |
Oxidation and crosslinking processes during thermal aging of low-density polyethylene films
Chabira SF, Sebaa M, G'sell C
Journal of Applied Polymer Science, 124(6), 5200, 2012 |
| 2 |
Plastic Deformation of Low-Density Polyethylene Reinforced With Biodegradable Polylactide, Part 1: Microstructural Analysis and Tensile Behavior at Constant True Strain-Rate
Rezgui F, G'Sell C, Dahoun A, Hiver JM, Sadoun T
Polymer Engineering and Science, 51(1), 117, 2011 |
| 3 |
Plastic Deformation of Low-Density Polyethylene Reinforced With Biodegradable Polylactide, Part 2: Creep Characterization and Modeling
Rezgui F, G'Sell C, Dahoun A, Hiver JM, Sadoun T
Polymer Engineering and Science, 51(1), 126, 2011 |
| 4 |
Thermooxidative Aging of Polyoxymethylene, Part 2: Embrittlement Mechanisms
Fayolle B, Verdu J, Piccoz D, Dahoun A, Hiver JM, G'sell C
Journal of Applied Polymer Science, 111(1), 469, 2009 |
| 5 |
Effect of Microstructure on Crazing Onset in Polyethylene Under Tension
Addiego F, Dahoun A, G'Sell C, Hiver JM, Godard O
Polymer Engineering and Science, 49(6), 1198, 2009 |
| 6 |
Influence of climatic ageing on the mechanical properties and the microstructure of low-density polyethylene films
Chabira SF, Sebaa M, G'sell C
Journal of Applied Polymer Science, 110(4), 2516, 2008 |
| 7 |
Dynamic mechanical properties and morphology of high-density polyethylene/CaCO3 blends with and without an impact modifier
Yang YL, G'Sell C, Hiver JM, Bai SL
Journal of Applied Polymer Science, 103(6), 3907, 2007 |
| 8 |
Characterization of volume strain at large deformation under uniaxial tension in high-density polyethylene
Addiego F, Dahoun A, G'Sell C, Hiver JM
Polymer, 47(12), 4387, 2006 |
| 9 |
Plastic deformation and damage of polyoxymethylene in the large strain range at elevated temperatures
Mohanraj J, Barton DC, Ward IM, Dahoun A, Hiver JM, G'Sell C
Polymer, 47(16), 5852, 2006 |
| 10 |
Mechanical properties and volume dilatation of HDPE/CaCO3 blends with and without impact modifier
Yang YL, Bai SL, G'Sell C, Hiver JM
Polymer Engineering and Science, 46(11), 1512, 2006 |
