| 1 |
Natural clay based nickel catalysts for dry reforming of methane: On the effect of support promotion (La, Al, Mn)
Liu HR, Hadjltaief HB, Benzina M, Galvez ME, Da Costa P
International Journal of Hydrogen Energy, 44(1), 246, 2019 |
| 2 |
Natural clay-based Ni-catalysts for dry reforming of methane at moderate temperatures
Liu HR, Yao L, Taief HBH, Benzina M, Da Costa P, Galvez ME
Catalysis Today, 306, 51, 2018 |
| 3 |
Ceria and zirconia modified natural clay based nickel catalysts for dry reforming of methane
Liu HR, Da Costa P, Taief HBH, Benzina M, Galvez ME
International Journal of Hydrogen Energy, 42(37), 23508, 2017 |
| 4 |
Industrial application of photocatalysts prepared by hydrothermal and sol-gel methods
Omri A, Benzina M, Bennour F
Journal of Industrial and Engineering Chemistry, 21, 356, 2015 |
| 5 |
Preparation, modification and industrial application of activated carbon from almond shell
Omri A, Benzina M, Ammar N
Journal of Industrial and Engineering Chemistry, 19(6), 2092, 2013 |
| 6 |
Original route to polylactide-polystyrene diblock copolymers containing a sulfonyl group at the junction between both blocks as precursors to functional nanoporous materials
Majdoub R, Antoun T, Le Droumaguet B, Benzina M, Grande D
Reactive & Functional Polymers, 72(8), 495, 2012 |
| 7 |
THE CHARACTERIZATION OF PREPARED ORGANOCLAY MATERIALS (DDMA) AND GAS SORPTION OF CHLOROBENZENE
Jarraya I, Fourmentin S, Benzina M, Bouaziz S
Canadian Journal of Chemical Engineering, 89(2), 392, 2011 |
| 8 |
Mineralogical identification, spectroscopic characterization, and potential environmental use of natural clay materials on chromate removal from aqueous solutions
Eloussaief M, Kallel N, Yaacoubi A, Benzina M
Chemical Engineering Journal, 168(3), 1024, 2011 |
| 9 |
Efficiency of natural and acid-activated clays in the removal of Pb(II) from aqueous solutions
Eloussaief M, Benzina M
Journal of Hazardous Materials, 178(1-3), 753, 2010 |
| 10 |
Valorization of olive mill wastewater by its incorporation in building bricks
Mekki H, Anderson M, Benzina M, Ammar E
Journal of Hazardous Materials, 158(2-3), 308, 2008 |
