| 학회 |
한국고분자학회 |
| 학술대회 |
2012년 가을 (10/11 ~ 10/12, 창원컨벤션센터) |
| 권호 |
37권 2호 |
| 발표분야 |
고분자가공/복합재료 |
| 제목 |
Morphology and physical properties of PA/ PPO/Multiwalled carbon nanotube nanocomposites |
| 초록 |
Polyamide(PA)/Polyphenyleneoxide(PPO) blend has been used in many automobile parts, such as an electro-deposition paintable fender. It demands high electrical conductivity and mechanical properties. Recently, MWCNT(Multiwalled carbon nanotube) was employed to improve electrical and mechanical properties. In this study, PA/PPO/MWCNT nanocomposites were prepared by melt mixing using twin screw extruder. Electrical resistivity and mechanical property of PA/PPO/MWCNT nanocomposites were measured by resistance tester and universal testing machine(UTM), respectively. By incorporating SEBS-MA as a compatibilizer, impact strength was remarkably improved in PA/PPO/MWCNT nanocomposites. Fracture surface was observed by using scanning electron microscopy(SEM). Thermal property was measured using diffrential scanning calorimeter(DSC). |
| 저자 |
이성호, 손권상, 구자훈, 심현석, 이민호, 김정호
|
| 소속 |
수원대 |
| 키워드 |
PA; PPO; MWCNT; Nanocomposite
|
| E-Mail |
|
