| 학회 | 한국고분자학회 |
| 학술대회 | 2005년 봄 (04/14 ~ 04/15, 전경련회관) |
| 권호 | 30권 1호, p.387 |
| 발표분야 | 복합재료 |
| 제목 | A Study on PTC/NTC and Mechanical Properties of Vinyl Polymer/Carbon Black Composite for Power Cable |
| 초록 | To improve mean-life and reliability of power cable, we have investigated volume resistivity and mechanical properties of vinyl polymer/CB composites, semiconductive materials for power cable. Specimens were made of sheet form with the nine of specimens for measurement. Volume resistivity of specimens was measured by volume resistivity meter after 10minutes in the preheated oven of both 25±1℃ and 90±1℃. And stress-strain of specimens was measured by TENSOMETER 2000. A speed of measurement was 200mm/min, ranges of stress and strain were 400Kgf/Cm and 600%. In addition tests of stress-strain were progressed by aging specimens in air oven. From experimental results of Figure 1 and 2, volume resistivity was high according to an increase of the content of carbon black. And yield stress was increased, while strain was decreased according to increasing the content of carbon black. And stress-strain were decreased some after aging because of oxidation reaction of chemical defect. We could know EEA was excellent more than other specimens from above experimental results2, 3. Fig. 1. Volume resistivity of semiconductive shield by carbon black content. Fig. 2. Stress-Strain of semicons by carbon black content before aging. Reference 1. Sung-chun Kim et al, “Polymer Engineering I”, 1994, Chapter 1-14. 2. Soo-jin Park, Soo-wan Song, Min-gang Suh, Jae-rak Lee, Journal of The Korean Institute of Composite Materials, 2003, pp. 19. 3. K.Steinfeld, W.Kalkner, IEEE Trans. on DEI, 5, 774(1998). |
| 저자 | 양종석, 이경용, 최용성, 박대희 |
| 소속 | 원광대 |
| 키워드 | Semiconductive Shield; Volume Resitivity; Stress-Strain; Oxidatio Reaction |
