| 학회 |
한국고분자학회 |
| 학술대회 |
2009년 봄 (04/09 ~ 04/10, 대전컨벤션센터) |
| 권호 |
34권 1호 |
| 발표분야 |
신재생에너지 기술현황(분자전자 부문위원회) |
| 제목 |
Molybdenum Oixde Buffer Layer for Printed Organic Photovoltaic Cells |
| 초록 |
Organic photovoltaic cells have been fabricated by inserting a thin, transparent, transition Molybdenum oxide layer between the transparent anode indium tin oxide (ITO) and the active layer. The interfacial Molybdenum oxide layer is deposited by thermal evaporation on ITO. The effect of the thickness of the oxide layer on electrical characteristics of the device was also studied and optimized thickness was achieved to give high power conversion efficiency of 4.03% under 100 mW/cm2 AM1.5G simulated light. Also, we fabricated aerosol jet printed OPVs using the mixture of P3HT and PCBM as active layer on Molybdenum oxide layer and the power conversion efficiency of 3.49% under 100 mW/cm2 AM1.5G simulated light with a short circuit current of 9.23 mA/cm2, a fill factor of 0.58, and an open circuit voltage of 0.64V have been achieved. |
| 저자 |
정재욱1, 김동환1, 신원석2, 문상진2, 이창진2, 윤성철2
|
| 소속 |
1고려대, 2한국화학(연) |
| 키워드 |
Organic Photovoltaic Cells; dithienopyrrole; Aerosol Jet Printing
|
| E-Mail |
|
