The aim of this study is to obtain diesel-like fuel from waste lubrication engine oils by pyrolitic distillation method, which can be used in diesel engines. With this aim in mind, waste engine oil is collected in a tank, and it is purified from contaminants such as dust, heavy carbon soot, metal particles, gum-type materials and other impurities by filtering in the process prepared earlier. To investigate effects of additives known as sodium carbonate (NaCO(3)), zeolite and lime (CaO) on density, viscosity, flash point, sulfur content, heating value and distillation temperature, the purified oil samples are blended separately with additives having mass basis of 2%, 4%, 6%, 8% and 10%. The mixed samples are exposed to pyrolitic distillation process to produce fuels to be used in engines. Thermal and physical properties of the produced fuels such as density, flash point, viscosity, sulfur content, heating value and distillation temperatures are examined. From these results the CaO with a ratio of 2% has the highest effect on decreasing of sulfur content of the waste engine oil and on acquiring the most suitable distillation temperatures close to values of a diesel fuel. Diesel-like fuel (DLF) is obtained as 60% of the waste lubrication engine oil. (C) 2009 Elsevier Ltd. All rights reserved.