The ability of O-isopropyl-N-ethyl thionocarbamate (IPETC), O-isobutyl-N-ethoxycarbonyl thionocarbamate (IBFCTC) and butyl ethoxycarbonyl thiourea (BECTU) collectors to increase the flotation of the sulphide minerals, chalcopyrite, galena and pyrite, has been studied. For each collector, the flotation characteristics of these minerals, flotation rate constant and flotation recovery maximum, have been calculated from the flotation data and compared as a function of pH and collector concentration. Overall, the flotation performance of these collectors is stronger for chalcopyrite than for galena and pyrite. Flotation increases with collector concentration and decreasing pH values. For chalcopyrite, the collector performances of BECTU are slightly better than those of IPETC but far superior to those of IBECTC, especially at high pH values or at low collector concentrations. The flotation performance of these collectors has been shown to be in good agreement with the amount of collector adsorbed at the mineral surface. The affinity of BECTU for the various minerals has been calculated using a multilayer adsorption model.