A large cold crucible has been used to purify metallurgical silicon in an induction heating furnace. Melt and directional solidification of more than 200 kg metallurgical silicon melt are realized by controlling down speed of the cold crucible relative to an induction coil. Metal impurity content in metallurgical silicon is reduced to a very low level, typically below 0.05 ppmw for transition metals like iron. The total processing time is within 30 h, and the mass ratio is higher than 70%. A numerical model is set up to reveal the electromagnetic field, the temperature distribution and the flow field. This purifying method could remove metal impurities effectively and has advantages of low contamination and low cost by avoiding use of graphite and quartz crucibles. (C) 2012 Elsevier B.V. All rights reserved.