This paper discusses the positive-temperature-coefficient effects of resistivity in Ni particle-dispersed poly(vinylidene fluoride) (PVDF) composites based on experiment results from SEM, DSC, and pressure-volume-temperature (PVT) measurements. The melting points of composites with Ni content of 20, 30, 40, and 50vol.% were equal to that of pure PVDF. The PTC effects in composites with Ni content of 40 and 50vol.% occurred at temperatures near the melting point of the PVDF matrix, whereas those in composites with Ni content of 20 and 30vol.% occurred at temperatures below the melting point of the PVDF matrix. We found that the PTC effect occurs even without melting of the matrix polymer. Moreover, we determined that a slight increase in specific volume at temperatures below the melting point of the matrix polymer acts fully as a driving force for forming a gap between fillers. This suggestion was backed up by theoretical analyses using percolation theory and a thermal-fluctuation-induced tunneling model. (C) 2012 Elsevier Ltd. All rights reserved.