Bromate is suspected to be a carcinogenic compound with a maximum contaminant level in drinking water imposed by the USEPA at 0.010 mg/L. The removal of bromide and bromate anions by hybrid coagulation-nanofiltration technique was systematically investigated in this study where humic acid (HA) was used as the model NOM. Two types of membranes (NF-270 and NF-90) and two types of coagulants (alum and ferrous sulphate) were investigated with regard to humic acid, bromide and bromate removals as well as the permeate flux decline and quality. It was found that bromide could not be effectively removed by nanofiltration, coagulation, or hybrid coagulation-nanofiltration, whereas bromate was reduced to bromide when ferrous sulphate was used. In addition to reducing bromate, humic acid was effectively removed by this technique while the permeate flux was maintained and in some cases improved, which suggests that the technique has some potentials to be applied in drinking water treatment train. Since coagulation and membrane filtration have been widely applied in drinking water treatment, the experimental results of this study indicate that the high removal rate of bromate in current water treatment processes can be achieved by simple modification of treatment processes and selection of proper coagulant. (C) 2010 Elsevier B.V. All rights reserved.