We examined the phase-separated structures of the mixed Langmuir-Blodgett (LB) films of C(k)H(2k+1)COOH (HkA: k = 17, 21) and C(m)F(2m+1)C(10)H(2)COOH (FmH10A: m = 6, 8) fabricated isothermally or after isobaric thermal treatments. Under isothermal fabrication conditions, disks and wire-type domains formed in the H17A/F6H10A LB films at high and low fabrication temperatures, respectively, because the line tension and dipole-dipole interaction were comparable with each other. The thermodynamically stable phases of H21A/F6H10A LB films at high and low fabrication temperatures were disks and polygonal domains, respectively. Isobaric thermal treatments of the Langmuir films affected the domain size and not the domain shape when the transfer temperature was the same. Isobaric thermal treatments were effective in controlling the domain size. The thermodynamically stable phases of both H17A/F8H10A LB films and H21A/F8H10A LB films were nanowires in the range of the fabrication temperatures studied. Isobaric thermal treatments of the Langmuir films did not affect the domain shape significantly and affected the domain size in both the LB films studied. The change in the value m of FmH10A was more effective in controlling the phase-separated structures of the mixed LB films than the value of k of HkA. (C) 2011 Elsevier Inc. All rights reserved.