Ni3Sn2 and several Co-Sn alloys prepared by electrodeposition in molten LiCl-KCl were studied as anode materials in rechargeable Li-ion battery. In the case of Ni3Sn2, the charge-discharge curves do not exhibit any plateau in contrast with Co-Sn alloys. For Ni3Sn2, the reversible capacity and the coulombic efficiency tend to constant values of about 225 mAh/g and 85%, respectively, after subsequent cycles. Among the studied Co-Sn alloys, the best electrochemical performances was observed when CoSn2 was used as anode material: the reversible capacity and the coulombic efficiency observed after 60 cycles were about 530 mAh/g and 96%, respectively. Whatever the alloys. SEM investigations performed before and after cycling do not reveal any significant difference between the original material and the cycled material, indicating a good stability of the electrodeposited films upon cycling. (C) 2010 Elsevier Ltd. All rights reserved.