This paper proposes a transient three-phase numerical model for the simulation of multiphase flow, heat and mass transfer and combustion in a bubbling fluidized bed of inert sand. The gas phase is treated as a continuum and solved using the computational fluid dynamics (CFD) approach; the solid particles are treated as two discrete phases with different reactivity characteristics and solved on the individual particle scale using an extended discrete element model (DEM). A new char combustion submodel considerings and inhibitory effects is also developed to describe char particle combustion behavior in the fluidized bed. Two conditions, i.e. a single larger graphite particle and a batch of smaller graphite particles, are used to test the prediction capability of the model. The model is validated by comparing the predicted results with the previous measured results and conclusions in the literature in terms of bed hydrodynamics, individual particle temperature, char residence time and concentrations of the products. The effects of bed temperature, oxygen concentration and superficial velocity on char combustion behavior are also examined through model simulation. The results indicate that the proposed model provides a proximal approach to elucidate multiphase flow and combustion mechanisms in fluidized bed combustors. Crown Copyright (C) 2010 Published by Elsevier Ltd. All rights reserved.