화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Korean Chemical Engineering Research, Vol.49, No.5, 548-553, October, 2011
Export Citation
아크릴 단량체 종류 변화가 수분산 Polyurethane Dispersion의 물성에 미치는 영향
Effect of Types of Acrylate Monomers on the Properties of Waterborne Polyurethane Dispersion
신용탁, 홍민기, 김병석, 이원기1, 유병원1, 이명구2, 송기창†
  • 건양대학교 화공생명학과, 320-711 충남 논산시 내동 26
  • 1한진화학주식회사 기술연구소, 437-801 경기도 의왕시 고천동 333
  • 2케이엘텍, 경기도 화성시 봉담읍 유리 68
Yong Tak Shin, Min Gi Hong, Byung Suk Kim, Won Ki Lee1, Byung Won Yoo1, Myung Goo Lee2, and Ki Chang Song†
  • Department of Chemical and Biochemical Engineering, Konyang University, 26 Nae-dong, Nonsan-si, Chungnam 320-711, Korea
  • 1Technical Research Institute, Hanjin Chemical Co., LTD, 333 Gocheon-dong, Uiwang-si, Gyeonggi 437-801, Korea
  • 2K.L. Tech Co., LTD, 68, Yu-ri, Bongdam-eup, Hwaseong-si, Gyeonggi 445-872, Korea
E-mail:
초록
Isophorone diisocyanate(IPDI), polycarbonate diol(PCD), dimethylol propionic acid(DMPA)를 출발물질로 하여 NCO terminated prepolymer가 합성되었다. 이 prepolymer의 NCO기를 아크릴 단량체로 capping하기 위해 다양한 아크릴 단량체인 2-hydroxyethyl methacrylate(HEMA), 2-hydroxyethyl acrylate(HEA), pentaerythritol triacrylate(PETA)가 첨가되었다. 제조된 용액의 평균 입경은 아크릴 단량체가 첨가되면서 증가하였다. 또한 제조된 코팅 막의 연필경도 및 내마모성은 순수한 수분산 폴리우레탄보다 우수하였으며, 아크릴 단량체 중에서 PETA가 가장 우수한 물성을 보였다.
NCO terminated polyurethane prepolymers were synthesized from isophorone diisocyanat(IPDI), polycarbonate diol(PCD) and dimethylol propionic acid(DMPA). Subsequently, acrylic terminated polyurethanes were prepared by capping the NCO groups of polyurethane prepolymers with different types of acrylate monomers, such as 2-hydroxyethyl methacrylate(HEMA), 2- hydroxyethyl acrylate(HEA) and pentaerythritol triacrylate(PETA). The average particle sizes of the acrylic terminated polyurethane solutions were increased by capping acrylate monomers. Also, the prepared coating films showed better abrasion resistance and pencil hardness than those of pure waterborne polyurethanes. The coating film with PETA exhibited the best abrasion resistance and pencil hardness of coating films prepared with three acrylate monomers.
Keywords:Waterborne Polyurethane;2-Hydroxyethyl Methacrylate;2-Hydroxyethyl Acrylate;Pentaerythritol Triacrylate;Acrylic Terminated Polyurethane
  1. Huntley J, Riley C, European Coatings Journal., 12, 936 (1995)
  2. Kang SG, Jang JS, Park CJ, Ryu H, J. Korean Ind. Eng. Chem., 12(8), 902 (2001)
  3. Kim BC, Kim WY, Lee DS, J. Korean Ind. Eng. Chem., 11(3), 318 (2000)
  4. Seo SH, Suh CS, Park JH, J. Korean Ind. Eng. Chem., 20(1), 52 (2009)
  5. Shin YT, Hong MG, Choi JJ, Lee WK, Lee GB, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res., 48(4), 428 (2010)
  6. Shin YT, Hong MG, Choi JJ, Lee WK, Lee GB, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res., 48(4), 434 (2010)
  7. Hong MG, Shin YT, Choi JJ, Lee WK, Lee GB, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res. (HWAHAK KONGHAK)., 48(5), 561 (2010)
  8. Cheong IW, Lee JK, Kim JH, J. Korean Ind. Eng. Chem., 16(1), 86 (2005)
  9. Kukanja D, Golob J, Zupancic-Valant A, Krajnc M, J. Appl. Polym. Sci., 78(1), 67 (2000)
  10. Hirose M, Zhou J, Katsutishi N, Prog. Org. Coat., 38(1), 27 (2000)
  11. Shin YT, Hong MG, Choi JJ, Lee WK, Yoo BW, Lee MG, Song KC, Korean Chem. Eng. Res. (HWAHAK KONGHAK)., in revision (2010)
  12. Kang SG, Park CJ, Jang JS, Ryu H, J. Korean Ind. Eng. Chem., 13(1), 46 (2002)
  13. ASTM D 3359, “Standard Test Methods for Measuring Adhesion by Tape Test,” ASTM International, 927-929 (1997)
  14. Hwang JH, Song KC, Korean Chem. Eng. Res. (HWAHAK KONGHAK)., in press (2010)