Real-time deformation monitoring of sol-gel-induced SiO2-TiO2 films using laser-induced fluorescence microscopy for corrosion protection

Jaebeom Lee

Korean Journal of Chemical Engineering, Vol.28, No.8, 1770-1772, August, 2011

DOI10.1007/s11814-011-0028-2 Export Citation

Real-time deformation monitoring of sol-gel-induced SiO2-TiO2 films using laser-induced fluorescence microscopy for corrosion protection

Jaebeom Lee^†

Department of Nanomedical Engineering, Pusan National University, Miryang 627-706, Korea

E-mail:

Real-time analysis of the deformation of surface coatings using laser-induced fluorescence microscopy (LIFM) has been demonstrated. An SiO2-TiO2 coating film doped with a fluorescent material by the sol-gel process was used, so that the changes in fluorescence intensity before and after corrosion could be monitored.

Keywords:Corrosion;Sol-gel;Laser-induced Coating;Laser-induced Fluorescence Microscopy;Deformation Monitoring

[References]

Rozenfel DI, Corrosion inhibitors, McGraw-Hill Companies (1981)
Rudd AL, Breslin CB, Mansfeld F, Corrosion Science., 42(2), 275 (2000)
Bierwagen GP, He L, Li J, Ellingson L, Tallman DE, Progress in Organic Coatings., 39(1), 67 (2000)
Brinker CJ, Scherer GW, Sol-gel science: The physics and chemistry of sol-gel processing, Academic Press (1990)
Hench LL, West JK, Chemical Reviews., 90(1), 33 (1990)
Qiu TQ, Tien CL, Int. J. Heat Mass Transfer., 35(3), 719 (1992)
Cline HE, Anthony TR, J. Appl. Phys., 48(9), 3895 (1977)
Mazumder J, Steen WM, J. Appl. Phys., 51(2), 941 (1980)
Nissim YI, Lietoila A, Gold RB, Gibbons JF, J. Appl. Phys., 51(1), 274 (1980)
Prokhorov AM, Konov VI, Ursu I, Mihailescu IN, Laser heating of metals, Adam Hilger (1990)
Panova AA, Pantano P, Walt DR, Anal. Chem., 69(8), 1635 (1997)
Epstein JR, Walt DR, Chem. Soc. Rev., 32(4), 203 (2003)
Buchler M, Watari T, Smyrl WH, Corrosion Science., 42(9), 1661 (2000)
Agarwala VS, Reed PL, Ahmad SS, Corrosion Detection and Monitoring-A Review, CORROSION 2000 (2000)

[1] Rozenfel DI, Corrosion inhibitors, McGraw-Hill Companies (1981)

[2] Rudd AL, Breslin CB, Mansfeld F, Corrosion Science., 42(2), 275 (2000)

[3] Bierwagen GP, He L, Li J, Ellingson L, Tallman DE, Progress in Organic Coatings., 39(1), 67 (2000)

[4] Brinker CJ, Scherer GW, Sol-gel science: The physics and chemistry of sol-gel processing, Academic Press (1990)

[5] Hench LL, West JK, Chemical Reviews., 90(1), 33 (1990)

[6] Qiu TQ, Tien CL, Int. J. Heat Mass Transfer., 35(3), 719 (1992)

[7] Cline HE, Anthony TR, J. Appl. Phys., 48(9), 3895 (1977)

[8] Mazumder J, Steen WM, J. Appl. Phys., 51(2), 941 (1980)

[9] Nissim YI, Lietoila A, Gold RB, Gibbons JF, J. Appl. Phys., 51(1), 274 (1980)

[10] Prokhorov AM, Konov VI, Ursu I, Mihailescu IN, Laser heating of metals, Adam Hilger (1990)

[11] Panova AA, Pantano P, Walt DR, Anal. Chem., 69(8), 1635 (1997)

[12] Epstein JR, Walt DR, Chem. Soc. Rev., 32(4), 203 (2003)

[13] Buchler M, Watari T, Smyrl WH, Corrosion Science., 42(9), 1661 (2000)

[14] Agarwala VS, Reed PL, Ahmad SS, Corrosion Detection and Monitoring-A Review, CORROSION 2000 (2000)