Refractive index differences between a first and a second fluid can be utilised to obtain information about the location and amount of the fluids in a porous medium in the case where the light absorption coefficient of the skeletal material is small and the light scattering coefficient high using optical measurement methods. An example of such a medium is an air-filled paper coating, and the fluid that of a printing ink liquid phase absorbing into the coating during printing. We examined capillary absorption of mineral oil, used in offset printing ink, into model coatings compressed from dispersed mineral pigments with a range of latex binder levels, and established a porosity-normalised relationship for light reflectance change as a function of absorbed mass of the liquid established at a given time after initial contact with the liquid. The results suggest a significant change in reflectance due to the absorption, and progressive absorption behaviour of the liquid in the coatings can be monitored by the change in reflectance following a newly established relationship derived from the observational data. The findings support the concept of a preferred pathway flow for the wetting front, defined by differential pore size and connectivity, and a longer time saturation front flow lagging behind the wetting front, which theoretically at the limit of infinite time coincides with the wetting front, the time constant of the approach being related to the permeability of the porous network.