The process of waste decomposition releases odors, airborne particles, and bioaerosols; therefore, air quality control at composting facilities is very important to the health of workers and the effective operation of such facilities. Because dielectric barrier discharge (DBD) produces chemical species, it has been used to remove undesired species interesting for environmental applications. In this study, a DBD reactor was applied to a composting facility to simultaneously remove odors, airborne particles and bioaerosols. The power consumption required was below 18.9W when the flow volume of the pollutant gas was 0.2 L and the concentrations of ammonia, amines, airborne particles, and bioaerosols were 150 (or 75) ppm, 140 ppm, 2.1 x 10(8) particles/m(3), and 1.1 x 10(4) CFU/m(3), respectively. The removal efficiency of contaminants in the air increased as the specific energy densities (SED) increased, with removal efficiencies of up to 80% and 76% being achieved for ammonia and amines. Moreover, the removal efficiency of the overall airborne particles was 75% when 113 J/L of SED was employed, while the bioaerosols removal efficiency was 89% when 38 J/L of SED used. (C) 2010 Elsevier B.V. All rights reserved.