Polymer Bulletin, Vol.66, No.2, 239-258, 2011
Effect of nano-nucleating agent addition on the isothermal and nonisothermal crystallization kinetics of isotactic polypropylene
Using differential scanning calorimetry (DSC) technique, a comparative study has been made of the isothermal and nonisothermal crystallization kinetics of nonnucleated isotactic polypropylene (iPP) and of nucleated iPP with 0.5 wt% of single-walled carbon nanotubes (SWCNTs) as a nucleating agent. The Avrami exponents (n) of iPP and nucleated iPP are close to 3.0 for isothermal crystallization. These results indicate that the addition of nucleating agents did not change the crystallization growth patterns of the neat polymer and that crystal growth was heterogeneous three-dimensional spherulitic. The results show that the addition of SWCNTs can shorten the crystallization half-time (t(1/2)) and increase the crystallization rate of iPP. In the nonisothermal crystallization process, the Ozawa model failed to describe the crystallization behavior of nucleated iPP. The Caze-Chuah model successfully described the nonisothermal crystallization process of iPP and its nanocomposite. A kinetic treatment based on the Ziabicki theory is presented to describe the kinetic crystallizability, in order to characterize the nonisothennal crystallization kinetics of iPP and nucleated iPP. Polarized light microscopy (PLM) experiments reveal that SWCNTs served as nucleating sites, resulting in a decrease of the spherulite size.
Keywords:Isotactic polypropylene;Nanocomposite;Nucleating agent;Isothermal and nonisothermal crystallization kinetics;Crystal growth