It has been established that addition of carbon additives to the lead negative active material (NAM) of lead-acid batteries increase battery charge acceptance in hybrid electric vehicle mode of operation. The present work studies three types of activated carbons and two types of carbon blacks with the aim to evaluate their efficiency in improving the charge acceptance of lead-acid batteries. It has been established that the size of carbon particles and their affinity to lead are essential. If carbon particles are of nanosizes, they are incorporated into the bulk of the skeleton branches of NAM and may thus increase the latter's ohmic resistance. Their content in NAM should not exceed 0.2-0.5 wt.%. At this loading level, carbon grains are adsorbed only on the surface of NAM contributing to the increase of its specific surface area and thus improving its charge acceptance. When carbon particles are of micron sizes and have high affinity to lead, they are integrated into the skeleton structure of NAM as a structural component and act as super-capacitors, i.e. electric charges are concentrated in them and then the current is distributed along the adjacent branches of the lead skeleton with the lowest ohmic resistance. This eventually improves the charge acceptance of the negative battery plates. (C) 2011 Elsevier B.V. All rights reserved.