Studies on cement concrete microstructures are carried out to explain experimentally observed phenomenon and for modeling of concrete at the macroscopic level. In this article, the preparation of polymer impregnated mortar (PIC) is carried out by partially or fully replacing the pores in the cement mortars (OPC) by PMMA. The effect of this polymer impregnation on density and morphology of the cement matrix is studied. The microstructural changes in the mortar, on exposure of these specimens to hydrochloric acid and sea water for 7 and 28 days, are also investigated in this article. The above studies indicated that the polymer addition decreased the voids in the mortar thereby preventing leaching of water soluble salts present in the OPC. It was observed that the polymer also prevented the external chemical media from permeating into the cement matrix and undergoing interactions with it. It is concluded that the durability and chemical resistance properties of the PIC are better compared with OPC. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 116: 3534-3540, 2010