In this study, poly(ethylene terephthalate) (PET) fabrics were modified with two types of commercial lipases, namely, Lipex and Lipolase, and grafted with acrylic acid (AA) to improve their absorption properties. The effects of the enzyme concentration, reaction temperature, time, and pH on the grafting of AA onto PET were investigated. The pretreatment of PET with lipases increased the amount of AA that was introduced to the PET fibers, whereas AA grafting onto the untreated PET fabrics led to lower graft yields. Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize the AA-grafted pretreated polyester fabrics. A new band appearing at 1546 cm(-1) in the Fourier transform infrared spectrum implied that AA was introduced onto the PET fabrics. The surfaces of the fabric fibers presented in scanning electron microscopy micrographs clearly indicated the formation of a layer of grafted poly (acrylic acid). The results show that the density of surface grafting was improved by the lipase pretreatment. The increase in grafting was higher for Lipex than for Lipolase. The highest graft yield was obtained with 1% Lipex and Lipolase for 30 min at pH values of 7 and 5, respectively. There were no significant changes in the tenacity or weight reduction of the fabrics. The Moisture Content of the samples increased linearly with increasing graft yield. This was higher for the pretreated fabrics grafted with Lipex. A higher color strength was obtained for grafted PET samples that were pretreated with Lipex when they were dyed in alkaline aqueous solutions. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 116: 203-209, 2010