The catalytic degradation of high-density polyethylene (hdPE) over ultrastable Y zeolite in a semibatch reactor was studied at different heating rates and reaction temperatures. Catalytic degradation of the polymer occurred at much lower temperatures than pure thermal degradation. When gel permeation chromatography was used to determine the molar mass distribution, it was found that solid state reactions occur only in the presence of a catalyst. These reactions change the polymer structure well before the formation of significant amounts of volatile products. The pattern of formation of gaseous and liquid products was studied and found to follow the temperature increase. After the system reached its final temperature, the reaction rate of formation of volatile products decreased rapidly. The product range was typically between C-3 and C-15 Isobutane and isopentane were the main gaseous products. The liquid product fraction was alkane-rich, as alkenes rapidly undergo bimolecular hydrogen transfer reactions to give alkanes as secondary products.