PREPARATION OF ALUMINA CATALYST SUPPORTS AND NiMo/Al<SUB>2</SUB>O<SUB>3</SUB> CATALYSTS

Rhee YW; Guin JA

Korean Journal of Chemical Engineering, Vol.10, No.2, 112-123, April, 1993

PREPARATION OF ALUMINA CATALYST SUPPORTS AND NiMo/Al₂O₃ CATALYSTS

Several alumina catalysts were prepared to investigate effects of catalyst preparation variables on pore structure, including sintering time and temperature, acid type, and fiber type and loading. Each catalyst was characterized with a porosimeter and sorptometer in terms of pore size distribution, average pore diameters, pore volumes, densities and surface area. Bimodal NiMo catalysts were effectively prepared without losing surface area by using a combined method of coextrusion and fiber incorporation.

[References]

Hiemenz PC, "Principles of Colloid and Surface Chemistry," 2nd ed., Marcel Dekker, Inc., New York (1986)
Voyutsky S, "Colloid Chemistry," pp. 256-278, MIR Publishers, Moscow (1975)
Belding WA, Warfield WC, "Controlling the Properties of Catalyst Substrates Using Alumina," Presented at the Materials and Engineering Science Division of AIChE Meeting, Cleveland, Ohio, Sept. (1982)
Thomas AW, "Colloid Chemistry," pp. 161-164, McGraw-Hill Book Company, Inc., New York (1945)
Basmadjian D, Fulford GN, Parsons BI, Montgomery DS, J. Catal., 1, 547 (1962)
Tischer RE, J. Catal., 72, 255 (1981)
Ternan M, Packwood RH, Buchanan RM, Parsons BI, Can. J. Chem. Eng., 60, 33 (1982)
Marcelin G, Vogel RF, Swift HE, J. Catal., 83, 42 (1983)
Jiratova K, Janacek L, Schneider P, "Influence of Aluminum Hydroxide Peptization of Physical Properties of Alumina Extrudates," edited by Poncelet, G., Grange, P. and Jacobs, P.A., Elsevier, New York (1983)
Snell R, Appl. Catal., 12, 347 (1984)
Vogel RF, Marcelein G, Kehl WL, Appl. Catal., 12, 237 (1984)
Belding WA, Rigge RJ, "Pore Volume Control in Alumina Catalyst Supports," Kaiser Chemicals, Nov. (1983)
Satterfield CN, "Heterogeneous Catalysis in Practice," McGraw-Hill Book Company (1980)
Hirschhorn JS, Roll KH, "Advanced Experimental Techniques in Powder Metallurgy," pp. 225-252, Plenum Press, New York (1970)
Rootare HM, J. Phys. Chem., 71, 2734 (1967)
Baiker A, Reithaar A, Ind. Eng. Chem. Prod. Res. Dev., 21, 590 (1982)

[Referenced By]

[1] Hiemenz PC, "Principles of Colloid and Surface Chemistry," 2nd ed., Marcel Dekker, Inc., New York (1986)

[2] Voyutsky S, "Colloid Chemistry," pp. 256-278, MIR Publishers, Moscow (1975)

[3] Belding WA, Warfield WC, "Controlling the Properties of Catalyst Substrates Using Alumina," Presented at the Materials and Engineering Science Division of AIChE Meeting, Cleveland, Ohio, Sept. (1982)

[4] Thomas AW, "Colloid Chemistry," pp. 161-164, McGraw-Hill Book Company, Inc., New York (1945)

[5] Basmadjian D, Fulford GN, Parsons BI, Montgomery DS, J. Catal., 1, 547 (1962)

[6] Tischer RE, J. Catal., 72, 255 (1981)

[7] Ternan M, Packwood RH, Buchanan RM, Parsons BI, Can. J. Chem. Eng., 60, 33 (1982)

[8] Marcelin G, Vogel RF, Swift HE, J. Catal., 83, 42 (1983)

[9] Jiratova K, Janacek L, Schneider P, "Influence of Aluminum Hydroxide Peptization of Physical Properties of Alumina Extrudates," edited by Poncelet, G., Grange, P. and Jacobs, P.A., Elsevier, New York (1983)

[10] Snell R, Appl. Catal., 12, 347 (1984)

[11] Vogel RF, Marcelein G, Kehl WL, Appl. Catal., 12, 237 (1984)

[12] Belding WA, Rigge RJ, "Pore Volume Control in Alumina Catalyst Supports," Kaiser Chemicals, Nov. (1983)

[13] Satterfield CN, "Heterogeneous Catalysis in Practice," McGraw-Hill Book Company (1980)

[14] Hirschhorn JS, Roll KH, "Advanced Experimental Techniques in Powder Metallurgy," pp. 225-252, Plenum Press, New York (1970)

[15] Rootare HM, J. Phys. Chem., 71, 2734 (1967)

[16] Baiker A, Reithaar A, Ind. Eng. Chem. Prod. Res. Dev., 21, 590 (1982)