This paper presents a simple cascade controller in the enhanced modified Smith predictor structure for control of integrating processes. The proposed structure consists of two control loops, a secondary inner loop and a primary outer loop. The method has totally three controllers of which the secondary loop has one controller and the primary loop has two controllers. The secondary loop controller is designed using IMC technique. The primary loop set-point tracking and disturbance rejection controllers are designed using direct synthesis method. The primary set-point tracking controller is designed as a PID with lag filter and the primary disturbance rejection controller is designed as a PD with lead-lag filter. Simulation studies have been carried out on various cascade integrating processes with/without zero. The present method gives significant disturbance rejection both in the inner and outer loops and also shows significance improvement when compared to the recently reported methods. (C) 2009 Elsevier Ltd. All rights reserved.