A deposition-precipitation (DP) process was used to prepare silica-titania core-shell pebbles decorated with nanocrystalline gold suitable for low-temperature catalytic oxidation of carbon monoxide (CO). The microstructure phase content, crystallography, and catalytic activity were correlated with the pH (3-8), aging time (15, 30, 60 min), and heat treatment employed for gold crystallization (200-400 degrees C) A homogeneous metal distribution, high gold loading (3.7-4.4 wt%), and superior interfacial adhesion between gold and titania were obtained when the support pebbles were prepared at 600 degrees C, it temperature lower than that required for the anatase-to-rutile transformation. Nucleation and growth of {111} faceted gold was favored at mid-pH (6.4-8), while smaller crystals (< 7.5 nm) were obtained at short aging times (<= 60 min) and low growth temperatures (<= 300 degrees C). Catalytic activity was optimized by homogeneously dispersing gold nanocrystals (3 nm) using pH 6.4 and an aging time of 30 min. These robust materials, may offer superior activity and life times when deployed in fluidized bed catalytic cracking units.