화학공학소재연구정보센터
Journal of Power Sources, Vol.191, No.2, 591-600, 2009
Sucrose-aided combustion synthesis of nanosized LiMn1.99-yLiyM0.01O4 (M = Al3+, Ni2+, Cr3+, Co3+, y=0.01 and 0.06) spinels Characterization and electrochemical behavior at 25 and at 55 degrees C in rechargeable lithium cells
Doubly doped LiMn1.99-yLiyM0.01O4 (M=Al3+, Ni2+, Cr3+, Co3+: y = 0.01 and 0.06) spinels have been synthesized by the sucrose-aided combustion method. Combined TG/DTA and XRD studies have shown that stoichiometric single-phase spinels are formed after annealing of the samples at 700 degrees C for 1h. The samples obtained are nanocrystalline materials having a narrow size-distribution and a coherent domain size between 40 and 60 nm, depending on the amount of fuel (sucrose) used in the synthesis. The influence of the Li-excess, the type of Mn+-dopant cation and the amount of fuel used in the synthesis on the electrochemical behavior of tire spinels in a Li-cell at room and at elevated temperature (55 degrees C) has been studied. At 25 degrees C all the spinels synthesized have a good capacity retention after 100 cycles, QRt- 100 > 92%. At 55 degrees C the increase of the Li-excess improves the cycling performances. Rate capability Studies show that the spinels retain >90% of their capacity even at 5C rate. Tire synergic effect of the Li-excess and the particle size on the electrochemical properties of the spinels as cathode material has been settled. The LiMn1.93Li0.06M0.O-01(4,) (M = Al3+, Ni2+) spinels, with cyclabilities >99.9% by cycle at both 25 and 55 degrees C, and high rate capabilities, are the ones that show the best electrochemical properties. (C) 2009 Elsevier B.V. All rights reserved.