- Previous Article
- Next Article
- Table of Contents
Journal of Power Sources, Vol.185, No.2, 595-602, 2008
Effects of coal syngas impurities on anodes of solid oxide fuel cells
A literature review is conducted to summarize the studies oil the identification of impurities in coal syngas and their effects on the performance of Ni-yttria stabilized zirconia (Ni-YSZ) anode of solid oxide fuel cells (SOFCs). Coal syngas typically contains major species, CO, H-2, CO2, H2O, CH4, N-2, and H2S as well as trace impurities. Thermodynamic equilibrium calculations have indicated that trace impurities species such as Be, Cr, K, Na, and V in the coal syngas form condensed phases under warm gas cleanup conditions and can be effectively removed by the cleanup processes. For meaningful data comparison, a practical parameter is formulated to quantify the level of degradation normalized with respect to the relevant experimental parameters. Experimental results show that the existence of Hg, Si, Zn and NH3 in the coal syngas does not significantly affect the performance of the Ni-YSZ anode. The presence of Cd and Se in the syngas impacts the SOFC anode performance to some extent. impurity species such as Cl, Sb, As, and P cause severe cell voltage degradation clue to attack oil the Ni-YSZ anode. Sb, As and P have the potential to react with Ni to form secondary phases in the Ni-YSZ anode, which deteriorate the catalytic activity of the anode. (C) 2008 Elsevier B.V. All rights reserved.