Micellar-enhanced ultrafiltration (MEUF) process was explored for obtaining pure water from an aqueous solution containing small amount of trihalomethanes (THMs). A homologous series of polyethylene glycol alkylether was used as nonionic surfactant. To understand effects of membrane hydrophilicity on the performance of MEUF process, membranes for the ultrafiltration were prepared from polysulfone blends containing various amount of a hydrophilic copolymer, poly(1-vinylpyrrolidone-co-acrylonitrile) (P(VP-AN)). An increase in the permeate flux was observed with an increase of the membrane hydrophilicity. The performance of MEUF process in removing THM and surfactant was shown to depend on the membrane characteristics, surfactant characteristics, and operating pressure. The rejections of THM and surfactant were increased with increasing hydrophobicity of surfactant and hydrophilicity of membrane. The rejections of THM examined with hydrophilic membranes were increased with increasing operating pressure, while those examined with hydrophobic membranes were decreased with increasing operating pressure. THM included in water could be removed up to 99% via MEUF process. The performance of MEUF examined with hydrophilic membranes could be explained with the rejection of micelles containing THM, while that examined with hydrophobic membranes could be explained with hydrophobic interactions between surfactant and membrane materials. (C) 2008 Elsevier B.V. All rights reserved.