Journal of Membrane Science, Vol.324, No.1-2, 111-118, 2008
High-performance hybrid pervaporation membranes with superior hydrothermal and acid stability
A new organic-inorganic hybrid membrane has been prepared with exceptional performance in dewatering applications. The only precursor used in the sol-gel synthesis of the selective layer was organically linked 1,2-bis(triethoxysilyl)ethane (BTESE). The microporous structure of this layer enables selective molecular sieving of small molecules from larger ones. In the dehydration of n-butanol with 5% of water, the membrane shows a high separation factor of over 4000 and ultra-fast water transport at a rate of more than 20 kg m(-2) h(-1) at 150 degrees C. This can be related to the high adsorption capacity of the material and the sub-micron thickness of the selective layer. The selectivity has now remained constant over almost one and a half years under continuous process testing conditions. Apart from the hydrothermal stability, the membrane exhibits a high tolerance for acid contamination. A slow performance decline in flux and separation factor is only observed at a pH lower than 2. The high stability and effective separation indicate a broad industrial application potential of the hybrid membrane material. (C) 2008 Elsevier B.V. All rights reserved.
Keywords:pervaporation;dewatering;organic-inorganic hybrid;microporous membrane;hydrothermal stability