Arsenate adsorption from aqueous solutions onto clinoptilolite-heulandite rich tuffs modified with iron or manganese or a mixture of both iron and manganese in this work was investigated. A kinetic model was considered to describe the arsenates adsorption on each zeolitic material. The modified clinoptilolite-heulandite rich tuffs were characterized by scanning electron microscopy and X-ray diffraction analysis. The elemental composition and the specific surface area of the zeolitic material were also determined. The arsenate adsorption by the modified zeolites was carried on in a batch system considering a contact time from 5 min to 24 h for the kinetic experimentation. The arsenic was detected by atomic absorption spectrometer using a hydride generator. The kinetics of the arsenate adsorption processes were described by the pseudo-second-order model and the obtained parameter k varies from 0.15 to 5.66 mu g/gh. In general, the results Suggested that the kinetic adsorption of arsenates on the modified clinoptilolite-rich tuffs depend of the metallic specie that modified the surface characteristics of the zeolitic material, the chemical nature of the metal as well as the association between different metallic chemical species in the zeolitic Surface. (C) 2008 Elsevier B.V. All rights reserved.